There’s like 8 more bolts to undo under the car that you forget to mention. You make it seem like there are less steps than there really are. Would’ve been more helpful if you actually showed all the bolts and clip holders that have to be removed. Not a great tutorial sadly
Bro is doing extra labor work… you don’t need to take off the bumper to get to the headlight just get somebody with smaller hands to reach inside and you’ll be fine
I had to comment on your video because you missed a lot of steps when it comes to removing the front bumper. There's a bunch of screws under the car, on the sides under where you mentioned (that actually connect the bumper to the car) and some special clips that are extremely difficult to remove under the headlight assembly. Also, you need to state if this is the base model or the LT. Premier, RS, etc. With different trim levels comes extra steps so I thought I would point that before viewers like my self start tear apart their Cruzes like I did.
@@johnshirtcliff9399 I didn't. I literally got to that step on the bumper and gave up. I didn't see a way to remove it without breaking it, because it was attached with some kind of rivet screw. I'm HIGHLY curious to see how this guy did it because he already had to screws removed when he popped the side clips. I'm assuming he broke them off (since they on the inside where they can't be seen) because they are riveted in.
This is incorrect .you already have the bumper half off or it come in broken. There's more bolts in wheel well to the fender and like 6 more under the front bottom of bumper
You can literally jack up the car, and remove the bottom protection pan and work from the inside the bumper to the outside by releasing the clips on the inside of the bumper where the fog lights are placed.
How do I disconnect the led light by its self i got one working and one not and I’m trying to disconnect the other one none of the videos explain what the headlights wires are for when disconnect
That’s an excellent question… I’m sure the procedure is similar - you may have to remove the bumper on yours as well… not sure though - thanks for watching
Thank you for being straight to the point! Appreciate you
Your missing a lot of clips and screws underneath and on sides by the wheel wells. For anyone watching it’s more then what he shows
Absolutely
no doubt he missed a bunch of them
You prooved it look so simple. Thanks.
Great video dude. Helped me with replacing my lights
Great to hear! thanks for watching man!
There’s like 8 more bolts to undo under the car that you forget to mention. You make it seem like there are less steps than there really are. Would’ve been more helpful if you actually showed all the bolts and clip holders that have to be removed. Not a great tutorial sadly
This was so much easier then the other videos taking pretty much the whole car apart.
Que quilombo q hay q hacer para cambiar una luz de posición, q desastre chevrolet
Bro is doing extra labor work… you don’t need to take off the bumper to get to the headlight just get somebody with smaller hands to reach inside and you’ll be fine
I had to comment on your video because you missed a lot of steps when it comes to removing the front bumper. There's a bunch of screws under the car, on the sides under where you mentioned (that actually connect the bumper to the car) and some special clips that are extremely difficult to remove under the headlight assembly. Also, you need to state if this is the base model or the LT. Premier, RS, etc. With different trim levels comes extra steps so I thought I would point that before viewers like my self start tear apart their Cruzes like I did.
Yea true so how did u replace the bulb cause damn man can't do it
@@johnshirtcliff9399 I didn't. I literally got to that step on the bumper and gave up. I didn't see a way to remove it without breaking it, because it was attached with some kind of rivet screw. I'm HIGHLY curious to see how this guy did it because he already had to screws removed when he popped the side clips. I'm assuming he broke them off (since they on the inside where they can't be seen) because they are riveted in.
Thank you for the video!! This helped me out so much
Thank you for the help good video
This is incorrect .you already have the bumper half off or it come in broken.
There's more bolts in wheel well to the fender and like 6 more under the front bottom of bumper
Half the bolts on this bumper appear to be missing before he even started. removed what he said, still bolted on somewhere.
Absolutely.
Thank you
Mine has a grey plug for the wire harness. And it will not come apart
Mine as well, let me know if you found a way around this
I dont have to do all of this just to change my bulbs on the ls model?
Would this procedure be similar for getting to the fog lights?
You can literally jack up the car, and remove the bottom protection pan and work from the inside the bumper to the outside by releasing the clips on the inside of the bumper where the fog lights are placed.
Anything to un screw underneath the car.. i have to replace my grille this weekend
Is that a stock front bumper?? It has some camaro essence from that angle
How do I disconnect the led light by its self i got one working and one not and I’m trying to disconnect the other one none of the videos explain what the headlights wires are for when disconnect
How do you snap the bumper back into those clips underneath the headlights
Is this the same for 2018 equinox
That’s an excellent question… I’m sure the procedure is similar - you may have to remove the bumper on yours as well… not sure though - thanks for watching
video how you SHOULDN'T take off front bumper. a lot of stuff missed, a lot of screws under bumper and some under a fender...
There are WAY more things that need to be unscrewed/unbolted. You're going to need a car lift or Jacks. Do you research
Terrible video. Did not show what’s going on inside the fenders at all. Everyone can find the 4 bolts up top.
Forgot to screws under the bumper no good