Keeps looking better and better! I probably would've used the original weighted strainer pick-up thing and put that filter outside of the tank. Also, just a reminder, tho I'm sure you remember, injection oil is typically much lower viscosity than premix only oil.
Im pretty sure thats only 1 cylinder but hard to really tell from video. Check the rails the track rolls on and make sure they aren't wore through. You have the coil if it needs it so your going to have a blast no matter what! Fun stuff!
I would say forget the oil injection and just go with premix. Premix doesn't have any mechanical parts therefore is not able to fail. You'll be better off in the long run just running mixed fuel. Just an FYI, they sell a larger chainsaw style fuel filters than can take in fuel from all directions instead of relying on going through the nipple on the standard fuel filter. You can also drill a few holes before the element side to keep fuel coming in if the nipple gets plugged..
Mark my word your going to regret using that style filter in the tank, there not designed for being submerged in gas. !!! 🤣 That brass thing you should have put that back in the tank and used that other filter before it goes into the fuel pump.
Boudy mix it 50:1 , on the oil injection pump there'll be a 10 mm headed bolt or it mit be flat head screw driver set , but any how fill your oil injection bottle and loosen that bolt and that how you bleed the oil injection system let oil come out until you dont see ant air bubbles, and run a couple gallons of premix in the tank until you know the oil injection pump is working,
I'm a fan of the channel but please stop draining fuel/ oil even old stuff on the ground.... I'm assuming you've got a well but also just poor form. did it at the old place too.... it's not hard to pour in a container and burn it off whatevers left. Thats better than messing up your ground water, fire risk, etc
There is a place in NY called DEC, give them a call, they are really good at helping with old fuel cleanups. Hope you get it running while you still have a lot of snow. Sleds are a lot of fun when you can travel the local road before they get plowed and salted. 👍
Keeps looking better and better! I probably would've used the original weighted strainer pick-up thing and put that filter outside of the tank. Also, just a reminder, tho I'm sure you remember, injection oil is typically much lower viscosity than premix only oil.
👊
Im pretty sure thats only 1 cylinder but hard to really tell from video. Check the rails the track rolls on and make sure they aren't wore through. You have the coil if it needs it so your going to have a blast no matter what! Fun stuff!
That style ignition system you have to have both spark plugs in for them both to spark if i remember correctly.
I would say forget the oil injection and just go with premix. Premix doesn't have any mechanical parts therefore is not able to fail. You'll be better off in the long run just running mixed fuel. Just an FYI, they sell a larger chainsaw style fuel filters than can take in fuel from all directions instead of relying on going through the nipple on the standard fuel filter. You can also drill a few holes before the element side to keep fuel coming in if the nipple gets plugged..
👍👍PEWMA PART DEUX🙀
Mark my word your going to regret using that style filter in the tank, there not designed for being submerged in gas. !!! 🤣 That brass thing you should have put that back in the tank and used that other filter before it goes into the fuel pump.
Boudy mix it 50:1 , on the oil injection pump there'll be a 10 mm headed bolt or it mit be flat head screw driver set , but any how fill your oil injection bottle and loosen that bolt and that how you bleed the oil injection system let oil come out until you dont see ant air bubbles, and run a couple gallons of premix in the tank until you know the oil injection pump is working,
Check the crank seals. Killed many a seldom run sled. Have fun!
Better off to keep prefixing because those injectors are notorious for failing
Dealers generally won’t take electrical parts back.
I'm gonna use it. I'm not convinced that I am getting good enough spark on the left cylinder. I went ahead and ordered new plug caps.
i wouldn't even bother with the injection system, to me it makes more sense to run premix, more peace of mind.
You should do a oil pump delete on your car lol
👍🆙BigGuy
👍🏻
Replace those caps bud , try that before replacing the coil .
Bypass caps?
I'm a fan of the channel but please stop draining fuel/ oil even old stuff on the ground.... I'm assuming you've got a well but also just poor form. did it at the old place too....
it's not hard to pour in a container and burn it off whatevers left. Thats better than messing up your ground water, fire risk, etc
Yeah... you're right.
There is a place in NY called DEC, give them a call, they are really good at helping with old fuel cleanups. Hope you get it running while you still have a lot of snow. Sleds are a lot of fun when you can travel the local road before they get plowed and salted. 👍
How is starlink working for you guys?
It's alright. Nothing special for sure. But... when there is no other option, it's great! It took an hour for this video to upload.