AC INFINITY CLOUDFORGE T3 & T7 HUMIDIFIER Troubleshooting & Maintenance Guide
HTML-код
- Опубликовано: 16 окт 2024
- Welcome back to Garden Supply Guys this video is a troubleshooting and maintenance guide for the AC Infinity Cloudforge Humidifier, your next-gen solution for achieving optimal humidity levels in your grow space. This smart and precise humidifier is equipped with innovative features designed to cater specifically to the needs of growers.
🌿 Product Overview:
The AC Infinity Cloudforge Humidifier is a cutting-edge device featuring an EC ultrasonic vaporizer with digital pulse technology, providing up to 10 levels of moisture output. Its onboard controller, complete with smart humidity and timer programming, is supported by a corded precision humidity sensor for accurate readings.
⚙️ Troubleshooting:
1. Flooding Issues:
-If your humidifier has flooded, first, power off and unplug the device.
-Drain excess water from the unit and surrounding areas.
-Inspect the water reservoir for debris near the white plunger.
-Check all external ports for water and wait 24 hours for water to completely dry from ports.
2. Unit Not Working:
-Check the power source and ensure the unit is properly plugged in.
-Verify that the water reservoir is not empty; if so, refill it.
-Examine the UIS cable or Humidity Probe for any water or corrosion.
-Confirm that the digital display is functional; if not, check cable connections.
AC Infinity CLOUDFORGE T3 Humidifier:
www.gardensupp...
AC Infinity CLOUDFORGE T7 Humidifier:
www.gardensupp...
Check Out the AC Infinity Collection:
www.gardensupp...
@acinfinity
#gardening #mushrooms #hydroponics #planthealth #acinfinity #humiditycontrol #humidifer
do a teardown on the newer version pleeeease ive gone through 3 already debating if theyve done enough to warrant another purchase 🙏
We are dropping a new video on the breakdown Gen1 vs Gen2. There is one more detail on how to make these power up if you have no display like its dead. Its a simple fix.
He still didn’t answer the question how do you clean it but would you clean it with by humidifiers not letting us it’s not steaming
Both of my humidifiers "two diffrent brand I have the T3 though) went "bad" the same week. I got sick day after i set up a new tent and starting new seeds. Its been a rough week, not when you want your humidifiers to start leaking everywhere, especially in winter its been 30-40 percent humidity in my tents. This helps a lot thanks so much. I am guilty of not cleaning them as much as a should but I still do clean them both with vinegar every couple weeks.but have went as long as over a month without cleaning much alge buildup or anything
Glad this helped. We saw alot of folks having the drain out issue and just wanted to share the info. Makes life easier doing preventative checks 👍
Love my T3, haven't had any issues!
The cloudforge truly are the choice for humidifiers !
Gotten 3 cloudforge t3 , all 3 of them do not read anything from the sensor probe, so I can’t see or program the humidity, which I why I bought it. Anybody else have this issue?
I love my Cloudforge. Keeps VPD in check all day long
Although to be honest, it's really the Controller 69 that's so amazing. You could hook a normal humidifier to one of the UIS plugs and hook that up to the 69 and it would be 90% as good as the Cloudforge. It's the 69 and it's ability to use VPD as a trigger that's so cool...😊
Any word on the cloud wave T5 mid size vaporizer?? I was told they didn’t even have demo unit b4 Xmas. Got a T7 in the interim. Love the T3 & T7 as I do not have a huge grow. Just a 750w of led over my Dragon fruit 😊
We believe the T5 will remain in development until the dinosaurs roam the earth again… Until we hear more we are sitting on our hands.
Its the same way we feel about the 9” Oscillating Fan which has been in development since man discovered the wheel. Patience is all we have 🤣
My screen stopped working after cleaning is there any solution ? hes still working but the screen is black
Mine turned black also after I cleaned it. It works but screen is blacked and when it doesn’t let me connect it to the 69 pro
I blue tape my lid down...
Im using the hose ... And its outside the tent...
The negative pressure of the tent ..
Is enough to tug the hose and pull the entire lid off my humidifier...
Sometimes when i add water.. cause my humidifier is deep between two tents...
I would reach in to pop the lid open and would knock the whole entire top off so I started using blue tape to secure it down ..
I leave my humidifier in a square tuber ware bowl/pan
I never had and flood issues...
Just the lid flying off easily...
I like that i can put the lid on any way i want .. i think next gen only goes one way...
I noticed you have to keep the water clean....like if you finish your grow .. you turn everything off .. And leave wait in it...
The bubbler part has to be cleaned good .. or it barley puts moisture out... Its running but not doing allot ..
I started adding a splash of hydrogen peroxide to my water every time i add it now .. helps keep everything from getting gooey really fast . .
Im not a fan of using bleach on plastic or rubber items ...
Same. Flawless. ❤
I have the T3 and today I turn my set up on for first time in 6 months. Everything is working except the humidifier. The humidifier makes beepy noises (with no display) but it is not showing up on ac infinity controller. Do you know why this could be? thanks
Does dechloinated filter water work well enough to avoid the white film dust? Or must it be full RO or distilled water from the store?
I have a great dechlorinating filter but not sure if it will be enough. Thanks.
You can put any kind of water in the t3. The water will just determine when you need to clean it.
I didn't get a booklet with mine with instructions how to operate it you should do a video showing how to set it up without having a 69 controller I've been looking online for anyone to show how to operate this thing and no one has one out there for the T3 2nd gen
great work
I use a cheap Scent infuser for my humidity fog machine, minus the scent oils.
Our scottish water is slightly acidic so no chance of Limescale build up
Can you compare the T3 gen1 to the T3 gen2? Like you did with the fans? Thanks
You bet we are ! Working on it this week coming up. Gen1 vs Gen2 with repair and maintenance tips added in.
We did a repair video but found one big fix that brings them from dead/no display/no UIS connection right back to working.
Quite excited about getting this info out to help our fellow growers out as well as other grow shops to help their locals with defect issues. AC Infinity should be putting more of this info out but if they don’t we will 💯👍🌱
@@gardensupplyguys thanks so much. I am in the market for a T3 and have seen that the box changed so this is some great information. Heard a few people had some negatives on the Gen1. Interesting to see the differences. ACI are great at taking feedback directly from users and taking that Intel, moving fast with product iterations to suit needs. I’ve used their fans & controllers, quite literally each one as they have come out. Working with their support team to get exactly the functionality we need.
Peace ☮️
@ahoyskid the complaints on the cloudforge humidifiers is mostly user mis-use. We have the New Gen2 T3 & T7 back in stock.
I’ll break it all down in the next video drop. Rest assured after watching our new vid with Cloudforges you’ll know exactly what to do and get years of uninterrupted use.
@@gardensupplyguys legend! I have access to RODI water (marine coral tank owner) so I’ll be using that in my humidifiers exclusively so as not to have any mineral build ups.
Best,
@@ahoyskid stay tuned we are working on the new Gen1 vs Gen2 comparative with some awesome end data on how to fix dead units.
Mine seems like the hundity wont rise up the tube you can see it coming out the bottom iv had 2 woth the same issue they turn on just dont stop as its not pushing the hundity up the tube?
You may have excess water poured down the fog spout. If filling be careful not to pour down the center fog spout. This will hinder it from pushing up.
One issue I've had with my T3 is I've gone to check out my tent and the humidifier is working, but the vapor is just pouring out kind of like a lava effect instead of blowing out up in the air, which results in a lot of moisture on the floor.
Check the main tube and see if you have water poured down main line. This will cause the result you explained… been there done that with an over pour into the fog tube vs water tank…
Let me know if that fixed your issue Tolly 💪
they are great devices but tbh, 2 have broken down on me due to water ingress into the elctrics in the base unit. i sused they can only be used without the tubes directing the flow of water vapour. as even if you have the tubes directly vertical, there will always be condensation that runs back down the tubes. one was exchanged from the UK selling company 'as a sign of goodwill' (that rubbed me up the wrong way - it broke!!) and the other larger unit, i had to take a loss on and it turned into landfill rubbish, for non uk readers) :(
Why are the UK companies not providing you a proper 2 year warranty?
Backing what is sold is a big part of this industry.
The backflow of water that may work down into ultrasonic fog plate will just be reused but will not stop the unit from performance. It will just fill only based on what the float valve allows into base.
We run these in our store using the tubing to inject humidity to the high parts of a chamber down over all mushroom blocks running 80% plus humidity. In this application we would of seen issues.
Ensure the float valve is clean with no debris keeping float from closing completely. This is the main issue on why water leaks out base of Cloudforge.
I set mine up yesterday.. outside tent .. With hose .. with controller 69 plus. . And when I turned it down to 60% for a foiler spray ... When the tent was 75% ... And it kept ramping up more humidity...it won't turn off ... I unplugged it. I am unplugged the USB cord cable left unplugged for about a good 15 minutes and I started drying the tan up because there's a huge puddle on the floor. Now I'm leaving a drip pan ... I'm ok with it dripping... But not turning off when the humidity to high....it's acting like a cheap humidifier ... I'm so disappointed... With VPD on it does it's own thing..I just started using that setting just now..n but with auto on .. And I set both high to and low for 55% it keeps blowing humidity m..it's not turning off on auto any more...I unplugged it for the 2nd time ... Everything works perfect but this 1 day old humidifier I actually ordered from AC infinity site ... I'm using two cell phones both firmware are updated
Hey Steve if you still have troubles give us a call: 920-857-9493 or text this number. Its our store phone. You can share a screenshot of your T3 settings on the AC Infinity App. I’ll take a look and follow up to confirm your Humidity triggers are correct as well as anything else we may see 👍
We always have one running a MycoMatic grow tent we designed here and can help you out if needed 🤓
I notice same thing in VPD targets on controller 69 seem as though it stays on thinking about switch back to Rh settings instead of VPD
I figured it out ...I didn't understand that I had the settings wrong...I had both settings on in the auto humidifier settings...I set my VPD to .8 for veg and even set my exhaust to VPD at .7 and omg everything is working perfectly... My plants are saluting and standing tall like they are no longer looking over watered ...
I sat down next to the tent and played with the settings... And watch to see what made what turn on ...
Just using the hose. It usually causes a lot of water in the tent but I have a drip cup for it so it's no big deal ... And this humidifier in my 2x4 eats less then one bottle of drinking water a day.... This is a game changer ... Nice when you get it dialed in ..
Thanks for getting back to me
I like the T7 but even not having it U shaped like it says not to on the tube, I still get lots of water that drips down. Maybe it's normal I've never used humidifiers but sure is annoying .
As direct as you can create the humidifier tube without angle will create best flow without water 💧 return back… its perfectly okay to have some return 👍 as the walls of tube will always have some residual 💦 collection
@@gardensupplyguys It's actually my second one haha, just the way it be with the tube but it works great so i just put a towel under the bowl and will just suck the water out. Thanks for the quick reply!
I've only ever had flawless operation from my t's
How do I controle the triggers without the controller 69
Settings are made right on the humidifier console display panel vs controller 69.
Simple ✅
Mine reads 90% but I have it set to 60 so why is it playing dumb
my t3 wires are overheating
Check your UIS connection plug into the humidifier to ensure the plug and cable end are dry and no moisture has settled into the UIS plug. Sounds like you may have a possible ground to live going on creating heat or a possible frayed line inside the cable itself. If you detect moisture in UIS plug or see any signs of corrosion we have to clean it up.
Check it out and follow up.
I use tap water and just replace my cheap ($40) humidifier once a year. RO/distilled water is 99 cents per gallon so it would cost $25/month to fill it.
Think smarter.
Have my own RODI filter that I got from Bulk reef supply years ago. It’s too expensive to buy RODI when you can make it yourself.
@@ahoyskid Does it cost more than a humififer would cost to run it each year? My water bill is usualy higher than my mortgage and I know those RODIs waste 2-3 gallons of water for each gallon of cleaned water they provide. I couldn't afford to run one.
@@7munkeeI have the waste end recirculating back through a secondary RO filter. 6 stage total system, so very little waste water. Cost wise, still rocking the same set of filters minus the prefilters/carbon filter. The same RO membranes are in use. water is still reading 0Tds.
Wouldn’t have bought and set it all up if I didn’t need to use it regularly for water changes on the reef tank. But vs buying RO water, basically free.
The dehu I have uses a serious amount of electricity. 100% cost more to run long term. I’m lucky. Don’t pay for tap water. Just a yearly service charge for the luxury of having mains water.
@@ahoyskid I didnt pay for tap water until like 10 years ago. I moved from an old farmhouse into the local town. There are four of us here and the water bill runs $240+ per month. If I water my garden a few times a month in the summer, my water bill goes up $40.
Mortage is $209. I only have 2 years left on it thank god. I'm on a fixed income and the rising utility costs are killing me.
Wow! 240 per month on water alone is crazy expensive. Do you get rain often? I collect rain water and store it an a water but for all my outdoor plants, lawn etc. I am based in a region that is blessed with weekly rainfall year round.
Everyone should be entitled to clean running water. It shouldn’t cost an arm and a leg. The world is gone crazy.
What a toothache of a Programming Interface. Can’t just set 88% +/- 2%. Nope. It’s sooo unnecessarily complicated. Add to that if the power goes out you have to start all over with programming. Deal breaker.
Bad design, use room humidifiers , that can't leak no matter what.
the worse product
What are you having troubles with Kevin. If you are having a defect or dead display I’ll call you if you need help - Jesse