CREO PARAMETRIC 5.0 TUTORIAL /DOUBLE EYE END DESIGN IN CREO PARAMETRIC /KNUCKLE JOINT /Part 1.

CREO PARAMETRIC 5.0 TUTORIAL /DOUBLE EYE END DESIGN IN CREO PARAMETRIC /KNUCKLE JOINT /Part 1.
===============
IN THIS TUTORIAL WE LEARN HOW TO MAKE A DESIGN A KNUCKLE JOINT AND ASSEMBLY IN CREO PARAMETRIC 5.0.
AND WE WILL PROVIDE SAPERATE VIDEO OF ALL PART OF KNUCKLE JOINT AND ALSO 1 VIDEO PROVIDE FOR ALL KNUCKLE JOINT PART DESIGN IN COMBINE IN 1 VIDEO .
KNUCKLE JOINT PART IS
1.DOUBLE EYE END
2. SINGLE EYE END
3.KNUCKLE PIN
4 . COLLAR
5. TAPER PIN
First we can draw double eye end.
AND IN THIS TUTORIAL
(ALL DIAMENTION ARE IN MM.)
========
we will learn below tools or features (OPTIONS) CREO PARAMETRIC 5.0
Extrude Surface
Extrude cut
Revolve command
2d sketch in to 3d
Etc.
=========
other tutorial link ......
1.how to make a hexagonal cup using draft feature.
• CREO TUTORIAL #4 /HOW ...
2.how to make a piston in solid work.2020
• SOLID WORK TUTORIAL NO...
3.how to make a flower pot.
• SOLID WORK TUTORIAL NO...
4. SOLIDWORK TUTORIAL NO#2 | HOW TO MAKE A SCREW WITH VARIABLE PITCH DIAMENTION.
• SOLIDWORK TUTORIAL NO#...
5. SOLIDWORK TUTORIAL NO#1| HOW TO MAKE A KNURLING OPERATION IN SHAFT OR ROUND SURFACE.
• SOLIDWORK TUTORIAL NO#...
6. CREO 4.0 TUTORIAL NO# 1| HOW TO MAKE A THREADS IN BOLT(HEXAGONAL)
• CREO 4.0 TUTORIAL NO# ...
7. SOLIDWORK TUTORIAL NO #5 | HOW TO MAKE A DRILL BIT.
• SOLIDWORK TUTORIAL NO ...
8. SOLIDWORK TUTORIAL NO # 6 | HOW TO MAKE A PROPELLER OR FAN BLADE.
• SOLIDWORK TUTORIAL NO ...
9. CREO TUTORIAL # 5 HOW TO RENDER OBJECT IN CREO PARAMETRIC 4.0
• CREO TUTORIAL # 5 HOW ...
10. CREO TUTORIAL # 6 HOW TO MAKE A SOAP CASE.
• CREO TUTORIAL # 6 HOW...
11. CREO TUTORIAL NO #7 ! HOW TO USE TWIST COMMAND & MAKE STRIP.
• CREO TUTORIAL NO #7 ! ...
12. SOLIDWORK TUTORIAL NO #14 / DESIGN AND ASSEMBLY OF SKATE BOARD.
• SOLIDWORK TUTORIAL NO ...
13. SOLIDWORK TUTORIAL NO #16 / BEGINNERS EXERCISE 7.
• SOLIDWORK TUTORIAL NO ...
14. SOLIDWORK TUTORIAL NO #17 /BEGINNERS EXERCISE 8.
• SOLIDWORK TUTORIAL NO ...
==============
AND ALSO SEE THIS BELOW SPECIAL OPRATION THREAD LINK IN SOLIDWORK
1. HOW TO MAKE SQURE THREAD IN SOLIDWORK.
• HOW TO MAKE SQURE THRE...
2.HOW TO MAKE ACME THREAD IN SOLIDWORK.
• HOW TO MAKE ACME THREA...
3. HOW TO MAKE BUTTRESS THREAD IN SOLIDWORK.
• HOW TO MAKE BUTTRESS T...
4. HOW TO MAKE WORM THREAD IN SOLIDWORK.
• HOW TO MAKE WORM THREA...
========================
#CreoParametric5.0
#CreoParametric5.0tutorial
#CreoParametricKnucklejoint
#CreoKnucklejointdesign
#creobasictutorial
=====================
YOU CAN SUPPORT OUR CHANNEL FOR NEW TUTORIAL, WE PROVIDE SOLIDWORK AND CREO PARAMETRIC FREE TUTORIAL.
========
subscribe channel for more tutorial and also share and like video.
========
thanks for watching video..

[@nakum1368]

Nice Tutorial