Screw Jack assembly and parts in Creo Parametric (All parts included)
HTML-код
- Опубликовано: 25 авг 2020
- Screw Jack assembly design in Creo Parametric.
In this tutorial, we will design each and every component individually for the screw Jack. Then, by using the bottom-up assembly design approach, we will assemble them to complete the assembly. So let's design the Screw Jack assembly and its parts in Creo Parametric.
Timestamp:
0:53 - Body
6:12 - Nut
11:38 - Screw Spindle
18:12 - Cup
21:47 - Washer
24:30 - Counter-Sunk Screw
28:30 - Tommy Bar
32:30 - Assembly
Join this channel to get access to perks:
/ @cadxtraining
Playlist:
• Part Design in Creo Pa...
• Complex part design in...
• Sheet metal Design in ...
• Surfacing in Creo Para...
• Assembly Design in Cre...
• Detailing the drawing ...
• Gear design in Creo Pa...
@CADxTraining #CADxTraining #CADx
/ @cadxtraining
/ cadxtraining
t.me/CADxTraining
Very good explanation and teaching, thank you
Thank you CADX , Love ur work. U have been an inspiration for me to start my own channel.
Nice
Good to hear. Don't demotivate yourself by any means. Keep doing and keep growing. Make quality video always.
@@CADxTraining THANK YOU SIR
Thank you so much sir. Please post this type of video
The way you teach worth more than applause ❤️🙏👍thanks a lot and keep doing .and my humble request is teach somthing big like v12 engine model, assembly and simulation.i hope you would consider this.thank you in advance
Currently I am doing the basic for beginners. Slowly I will move to advance. It will take some time.
0:53 Body
6:12 Nut
11:38 Screw Spindle
18:12 Cup
21:47 Washer
24:30 Counter-Sunk Screw
28:30 Tommy Bar
32:30 Assembly
Excellent
at washer and Screw my creo says Constraint invalid and i cant continue after it
How to download the CAD cero software,can you guide
When was available sir
CAN I GET STP DATA OF THE SCREW JACK?
please upload a tutorial of top down assembly using skeleton modelling
how do you keep the picture near the model tree?
Done by video editor. Not the part of the parametric.
sir when i am taking line of 140 after taking centerline , my figure is not dividing in 70 ratio. How to resolve this?
Cancel it it and try one more time
Your teaching is Like, siri...... jitna kam utna dam
These are lengthy process 😢😢❤❤
Sir, I follow your design practice and try to sketch as you do but why my orientation of plane changes
There are multiple reasons behind this. It's not easy to explain it here. You need to learn the whole sketching concept for this.
🙏
HI Sir,
in third part you made first revolve by selecting front plane but in second feature (hole)why did u select right plane, why u did not select front plane again 13:32 timing
You can go with the front plane. That is also ok. But you will get a different orientation for the handle in the assembly.
Sir when I tried to merg screw spindle then it merged but opposite merged please tell me what I can do.
Go for flip option
@@CADxTraining Sir,where is flip camaand located please Guide us.
Sir, I can't able to change the hole dia in countersink for spindle sir .
Check the unit of the part. I think you have taken the English unit.
@@CADxTraining Ok thanks sir and your videos were very nice & clear too...
Tommy bar who to doing sir
Means extra drawings
You should explain in detail and slowly which features, commands and steps you are using..... In this video i found myself having problems with this 3 things
Dear Sir,
I have a request for you , please make a video on creating car model using style tool. And also provide where we can get 2d drawings for practice and projects.
thank you very much sir.
Tommy bar middle cutting sir
where are you getting ypur blueprints from?
From engineering books
@@CADxTraining interessting, thank you
Can you demonstrate how to generate raster image (TIFF) with custom dpi of a drawing in Creo and Autocad?
Can you tell me the actual reason behind this?
@@CADxTraining Our customers demand *Product Assembly Drawing* in this format for approval purpose according to vehicle fitment.
You can use save as .Tiff to get the file.
Have you tried it?
@@CADxTraining It takes snapshot of drawing only. This option is seems to be useless.
That means you don't get enough resolution for that image. To get a high quality tiff image, there is another indirect way.
Which version of creo are you using sir
Creo 6.0
@@CADxTraining thank you sir
19:31 sir, why you don't use 8mm instead of parallel lines?
You can go with 8mm but you need to delete the parallel constant. But when you use 8 mm then the two lines will not be considered as parallel lines. You can even consider 8mm dimension and parallel constant by deleting 38mm dia. 8mm is not a critical dimension from assembly point of view so we can leave it or we may use it .
@@CADxTraining It means not critical dimensions are less important. Thank you sir 👍🏻
Can I have this drawing file please?
You can take snapshot of this drawing in in hd resolution from this video.
I dont find the cadx template
This is my template. You need to create your own template if you want.
This will help you.
ruclips.net/video/Zglr-IARvYU/видео.html
Sir can we convert this drawing onto 2d
Yes
CADX my spindle is not fitting when trying distance 10
Check both the parts. You will find something.
@@CADxTraining something wrong with nut or a body
Hi sir, can make a video, how to import EBOM table from csv file in creo
i didn't get your question. what do you mean by EBOM table?
Actually bill of material(BOM) in drawing is parametric. But sometimes we need to create BOM table manually and type values. If less number of parts we can type manually, but if more number of parts, i want to import data from csv file to BOM table
You mean to say, you want to copy data from csv table to the manual table in creo parametric?
@@CADxTraining yes
Yes you can easily convert a Bom table to a manual table.
Which creo program is this?
Creo 6.0
@@CADxTraining can we do this in 3.0
Actually m super confused about the body part when I do that dimension of 70 it only streches upto half
Sir send toomy bar drawing cutting crew Jack please how to do
You can watch this.
ruclips.net/video/UY3yk6n-U_U/видео.html
Dear sir please provide pdf of drawings
You can take a snapshot from the video.
Cross cutting
how to hide sub assembly files in a single view in drawing
Watch my video about filter in creo.
Pls add drawing pdf link
You can take a snapshot in 1080 p resolution. All drawings are already given in the video.
hey first i would like to thankyou because this really helped me. Second - i am facing some problem while drawing the washer part. Around 22:53 after getting the hole done you select sketch while being at the hole section and than you press sketch again and a new tab comes where you draw and that gets added right! i dont have that option, when i press sketch everything gets disabled for me. why is it so? and can you please suggest some other way to complete it! i am new to creo and this is my assignment so i dont know how to do it on my own. please it would be a great help.
That option is there in all the Creo release. Please check all the options available in your release.
@@CADxTraining thank you for your reply. I did check, I checked again and again it's not there. Else there's some issue with my system, ig it's not functioning well. Thank you very much for your reply.
Also one req. Could you do a video on flange coupling!! I couldn't find a better screw jack on RUclips other than your.
4.30 hours to complete
Can u send creo this drawing and how to login drawing
You can take a snapshot in 1080p resolution.
Which one send me detiles sir please
@@CADxTraining sir which one please send me where avilable
In the beginning of this video, you can take a snapshot in 1080p.
Ok sir and thanks
Will u sir that one most important
Will u send air that drawing I mail u sir
You can take snapshot in 1080p resolution
Not coming cutting cable drawing check mail sir
Will u send Tommy bar drawing
Sorry about the drawing
Assemby
I send gmail sir
Will u please
Check your mail
Not coming sir can u please send me once sir it's most important
I doing but not cutting once will u Plsssss
Sir please sir I want if I doing I get my job please now no job for 1year
Will u please