fantastic! so you drop the filter in the middle of the compartment, not using the water reservoir at all. I suppose it's going to aspire air now. Well, that would make the coffee decidedly lighter...
Aspiration tube and exhaust tube! Why it hasn't been mentioned clearly in the official printed manual? I had noticed the plastic meshed filter but it was so hard to attach the filter to the aspiration tube. Thus, I have attached the resin filter to the exhaust tube and used the configuration for two liters of water . Is it broken now? The machine has never reached 8 bars zone. Can the filter attached to the exhaust pipe be a source of problem? Please, answer asap. It's a shame of customer support. You make great machines however, don't think about end-customer. I have wasted 200 grams of coffee beans. Does the machine Pl92t Elizabeth do well after such a treatment? I am really disappointed by the initial experience of using my first lelit product.
Hello and thank you for the videos. I have the Anita for a bit less than a year. Until now I didn't use the filter and when I made coffee (I only make espresso, never use the steam or hot water function), I always had 9 bars of pressure. Since I installed the filter a few weeks ago, I get 8 bars of pressure. In other words, it barely goes in the green zone. Is this normal? I didn't change anything else other than adding the filter
Lovely... Filter doesn't fit on the small hose. And there are no arrows. I have been running the filter on the return all the time now... Lovely Italia!!!! ❤❤❤
Well it does fit. Really needs a proper adapter. I bet the hose will rip after the 10th filter. This is a terrible documentation / management flaw. Or fix it with 11 cents per by putting a plastic adapter thing on the return hose that says EXIT on it...
Hello. Thank you for video. I have Lelit Anita l042temd and it has two tubes with the same size. How can I understand which one should be connected to a filter? Please answer. Thanks!!
I'm shocked. I made the same filter installation mistake (I attached the filter to the wrong tube). After 9 months, my Elizabeth stopped producing steam. I was sure that I was using the filter to prevent it. And now, my machine is broken.
This man (OP) needs an upper level management job at Lelit TODAY.
fantastic! so you drop the filter in the middle of the compartment, not using the water reservoir at all. I suppose it's going to aspire air now.
Well, that would make the coffee decidedly lighter...
Aspiration tube and exhaust tube! Why it hasn't been mentioned clearly in the official printed manual? I had noticed the plastic meshed filter but it was so hard to attach the filter to the aspiration tube. Thus, I have attached the resin filter to the exhaust tube and used the configuration for two liters of water . Is it broken now? The machine has never reached 8 bars zone. Can the filter attached to the exhaust pipe be a source of problem? Please, answer asap. It's a shame of customer support. You make great machines however, don't think about end-customer. I have wasted 200 grams of coffee beans. Does the machine Pl92t Elizabeth do well after such a treatment? I am really disappointed by the initial experience of using my first lelit product.
thanks for the tips, we will improve for the the future, if you need some clarification, please send an email at care@lelit.com
You're gonna waste way more beans my friend ❤
Hello and thank you for the videos. I have the Anita for a bit less than a year. Until now I didn't use the filter and when I made coffee (I only make espresso, never use the steam or hot water function), I always had 9 bars of pressure. Since I installed the filter a few weeks ago, I get 8 bars of pressure. In other words, it barely goes in the green zone. Is this normal? I didn't change anything else other than adding the filter
please try grinding finer
If my water calcium is 16 and magnesium is 6, still do i need water filter?
Lovely... Filter doesn't fit on the small hose. And there are no arrows. I have been running the filter on the return all the time now... Lovely Italia!!!! ❤❤❤
Well it does fit. Really needs a proper adapter. I bet the hose will rip after the 10th filter.
This is a terrible documentation / management flaw.
Or fix it with 11 cents per by putting a plastic adapter thing on the return hose that says EXIT on it...
I have a question I have a machine like the problem of grinding coffee. The grinder does not grind coffee
Hello. Thank you for video. I have Lelit Anita l042temd and it has two tubes with the same size. How can I understand which one should be connected to a filter? Please answer. Thanks!!
is the thickest
what is change in °d= e.g i have 14°d - what do i get after I install the filter?
Hi Lelit what is the diameter and length of the 70Liter ? I want to try if it fits in my Lelit
diameter 43mm h 150
I'm shocked. I made the same filter installation mistake (I attached the filter to the wrong tube). After 9 months, my Elizabeth stopped producing steam. I was sure that I was using the filter to prevent it. And now, my machine is broken.
I'm on day 4 and good I decided to go search.
I have a question I have a machine like the problem of grinding coffee. The grinder does not grind coffee
please write an email at care@lelit.com