2011 - 2018 Ford Focus Gauge Cluster LCD Screen Repair
HTML-код
- Опубликовано: 20 июл 2024
- Step by step "how to" replace your broken LCD screen in your Focus or Escape.
Typical repair costs at the dealership are around $1000 - $1500. You can find the replacement LCD panel online for around $100!
Disclaimer: I am an Amazon Associate and earn a small commission if you purchase through any of the links below. The affiliate program doesn't add any additional cost to you and it helps support my channel.
LCD Screen for 140mph Clusters: amzn.to/32AnBih
LCD Screen for 150mph Clusters: amzn.to/33AQiLd
--
#ford #focus #lcdrepair 
Авто/Мото
Thank you everyone for watching! I've recently become an Amazon Associate and have posted affiliate links in the description to where you can find replacement LCD panels. As I've mentioned in the past the panels can be found all over the internet, but if you purchase through the links it helps support my channel at no additional cost to you!
You're welcome!
If I purchase a used LCD screen or cluster, will the data from the old vehicle (mileage, etc.) be displayed on the screen in my vehicle? Or is the data stored in the PCM in the vehicle?
I hope you are still active I am trying to figure out what that board under the lcd screen that it plugs into is called. It is impossible to find
@@FixitBongbonghola
Cómo conseguir la pantalla en donde la puedo comprar??
Thanks for the vid bro. I ordered my part from Tanin electronics, it came in 2 days, I fixed my LCD screen in less than 20 minutes thanks to your video. Saved me hundreds of dollars and alot of time.
Nice work and thanks for watching!
I just used this video to change my 2016 Ford Escape screen, and it made it so simple. The dealership told me they would have to replace the whole instrument panel, and it would cost $1500. I purchased a new screen on Amazon for about $40, and it took me around 45 minutes to do this myself, including going back inside to swap out some tools. I cannot thank you guys enough!!
Nice work!!
I’m literally bawling right now, the shop said it was gonna cost me $1700 total to fix this. I’m trying to switch my plates to a different province, and the LCD screen failed the safety. THANK YOU SO MUCH for this video. I’ll actually be able to get my car on the road. You’re my hero god bless
This makes me so happy to hear!! So happy it was helpful and hell yeah for fixing it yourself!! Thanks for watching!!!
Its literally 39$ on amazon and it has an speedometer
Great video. Replaced the screen on my daughters 2014 Escape. Cost me $40 for new screen on Amazon. One hour of my time. Done.
Great job!! Thanks for watching!
You’re a life saver! I know this video is kinda old but know you’re so very appreciated!!
Know I appreciate you!
I just changed mine the other day. They quoted me $750 and told me it couldn't be replaced separately I had replace the whole cluster. Love how they lie to you just to make more money off you! Thanks for the video 😊
I looked around and all the other 'advice or fix it' vids make it so complicated. Yours went straight to the point and EVERYONE can DIY with a little patience and the right tools. Thanks pal!
Thank you for watching and leaving a comment!!
Thank you, thank you, thank you! With the aid of this video I just replaced the screen in my 2013 Ford Escape and it saved it at least $1000 by not taking it to the dealer who wanted to replace the entire instrument cluster including "programming" which I am still curious about.
Hell yes that's what I love to hear! Glad my video helped you out bud! At the defense of shops and dealerships, most have to charge that amount because they are tasked with replacing the entire cluster. Programming is usually required with newer vehicles because there is Canbus communication between the part and the ECU or BCMs in the vehicle. Either way whatever you saved some cash. Thanks for watching!!
Thanks! After watching your video and never trying anything like this i decided to go for it. i purchased the LCD on line then followed the video. it was easy and took me only about 25 minutes.
i have a 2017 Escape. Thank you so much!!!!!!
Wow, I really appreciate it. Nice work and thanks for watching!!
Thaaanks so muuuch I did this by my self (30 years girl) I don’t know nothing about cars y now I feel so empowering women. This works perfect 👍
Thanks for the video instructions. You saved us over $1200 and it only took me 45 minutes start to finish... I purchased the part in your link ( mine was the 140 mph version with the tabs) followed your instructions exactly and it all went smoothly. It pisses me off that the dealer would take advantage of people like that. Thanks again ..
Thanks for doing this one!
I need to change the lcd om my Ford Focus so this tutorial was right up my alley.
Cheers from Norway!
Thank you for watching!! Cheers!!
Thank you so much! I was literally able to do this myself for $46 off Amazon . My car is under warranty and the dealer wanted $100 deductible or $120 diagnostic fee. Save me a ton of money thank you so much you’re a lifesaver keep up the great videos!
Thank you so much for watching my video! I'm so glad it was helpful and could save you some money! Cheers!!
Thank you so much for this video! Both my lcds went out last year. Got the cluster screen for 100 and thanks to this video, took me 20 minutes to replace. This was awesome
Hell yeah!! Glad it was helpful and good job!!!
I got my replacement screen today and, following your instructions, have successfully replaced my instrument cluster screen, saving a thousand bucks! Thanks for this video!!
Love hearing this!!
OMG.. Thank you so much for your generous post. This is truly informative and very easy to follow video.. My 18 year old son replaced his screen following this video in 15 minutes. You saved us around 1600 dollars.. Truly appreciate you. Thanks.
Replaced the screen on my 2016 Escape. This video saved my $1100! I think the hardest part was getting the ribbon connector back in place. Everything else went exactly as shown. THANK YOU!
Way to go!!!
Hi just got done using your directions on replacing the lcd display on my escape. The instructions were right on the money, so thanks to you I saved about 1200 dollars.
Thanks so much for the video. It saved me so much money. I got the part for under 100 dollars which was less than the fee the dealership wanted to just diagnose it. Got the part and it took less than 45 minutes with the help of your video. Display is like new now. Thanks again!
Love hearing this! Nice work and thanks for watching!!
This video was so helpful! Purchased the part referenced in the video and my husband fixed my car within about 20 minutes. Thank you!!!
Heck yeah! Thank you for checking out my video, glad it was helpful!!
Thanks! This worked for me on a 2015 Ford Escape SE. there were some minor differences from the Focus but it was mostly the same. Took me about 20 minutes
Thank you! This was super easy. My cluster had screws & clips but the process was the same overall. Such a great video!
Thank you and nice work!!
Zillions thanks! This clip helped me save around 500$ only paying around 100 $for the dispaly. Very well described and detailed. Keep up the good work. Keep up publishing similar videos ☺️. Greetings from Romania 🇷🇴
This makes me so happy! Thanks for watching and nice work doing it yourself! Cheers from the USA!
This video was really helpfull as i faced the exact problem and because of your step by step video process i could fix mine... thank you
Thank you so much for watching and leaving a comment!
The product worked amazing! The tutorial was spot on in how to install this. Saved me thousands at a dealership
Thank you so much for watching!
Thank you for the video. Mine went out while on vacation in Florida. Took a chance to fix it myself. Saved close to 1400.00. I ordered the part but the ribbon connect I didn't lined up so it never came on. So I ordered the housing with it already inside. Success with that. Only problem is it did not show actual real mileage. Showed less miles than I even bought the car for. So I gave the ribbon connect another shot and success. Shop wanted 300 to even look at it and probably 1100 to fix it. Thank you so much. Now I can sell it with confidence.
I'd like to thank this channel, I was skeptical this screen would be compatible at first, I ordered the one in the description for $90ish off Amazon just got my dash all back together and it works to my surprise!!!
Thank you for watching, I appreciate it.
My 2015 was slightly different but this video guides me through the fix. Bought a screen on Amazon for $42. Took me an hour although I took time out for a meeting. Great video.
Just changed out my LCD screen. Ford Focus ST using this video. Evergreen
Everything went just as described. Thank you! It did save me a lot of money.
Nice work, I love hearing that. Glad you saved some cash, appreciate you watching!!
I have a 2014 Ford Focus st what lcd screen do I buy?
I know this is a older video and I am not sure how active you may be. The screen on my 2016 focus was getting lines so from watching your video I was able to replace it. I also used the link you have listed on Amazon. Thank you so much for this. Dealers are asking upwards of $1500 to replace the entire cluster and recalibrate. You have a new subscriber!
Well done and thank you so much for watching my video and the sub, I truly appreciate it!!
my new hero, saved me 1500$ and a fail inspection, thank you so much 😊,also thank you for the amazon link,made it so much easier
Nice work doing it yourself! Glad the video was helpful, thanks for watching!
Thanks for the very nice repair video. Ours was out for a while. Tried to find someone to fix it. All videos I saw wanted to replace whole thing. Then I found yours. Got the part and fixed it in about half an hour. Thanks again.
@Ronna Burda way to go!! Thank you for the complement, you fixing it yourself makes me happy!
Nice video bro! I just bought the whole gauge cluster from ebay. Should I install it like that or remove the lcd from that one? I’m afraid because someone told me that, if I install another one, I will need to reprogram my car or will never turn on.
Thanks man this saved me a ton. I got a like new off Amazon for 30$ and everything worked
Bongbong you are the man !! I just replaced the LCD screen by just watching your video.. Thanks for the instructional Video!!!!!!
No Art, you are the man for knocking out the job and saving money! Thank you for watching and supporting my channel!!
did it change the milage or keep it org.
Thank You Sir, i just changed my lcd screen on my Focus watching your step by step.
Way to go!!!! Glad it was helpful and thank you so much for watching!!
This video was the most helpful of the ones I watched because it actually demonstrated replacing the lcd screen. However, my 2014 Ford Escape parts were a little different than the ones shown in the video, so I had to figure out there were screws to remove in addition to the clips. But it was very helpful. Thanks.
Much appreciated! I'll keep that in mind and try to do a future video specifically for Escapes!
Thanks for your video, it explains very well, I was able to change the LCD of my Escape, greetings from Colombia!
I love this. So glad it helped, thank you for watching!!
Thanks for this helpful video! I did however struggle with the first cable that's attached to the back....but I saw another video that showed the little button at the top of it-that you can press down and pull the latch over 🤦🏾♀️ (for us simple minded folks lol). Other than that, thank you for showing us how easy it is to replace this one piece without the dealership! God bless you!!
Ah.. you know I had the thought that I should have spent more time filming the instrument cluster cable.. Thanks for the feedback and watching! Please feel free to share the link to the other video you watch showing it!
Thank you so much for posting this video. This has saved me 1300 dollars. Much appreciation! 👏👏👏👏
Way to go!! Thanks for watching!!
Thank you so much for what you doing... you're good explaining and fun to watch... fixed my Ford Focus with that exact problem and worked as a charm... thx again... if I would add anything to your video, as a bonus thou, I will recommend to clean all the "glasses", parts and exposed areas, believe me, not everyone will take the chance to do it unless told ; ). !! Once again, thx.
Thank you so much for watching and the feedback!!
Mega thanks for the video tutorial - My 2013 Ford Escape SEL Speedometer Cluster Display Screen was malfunctioning so I decided to replace it - Rather than separately purchasing a new display screen, I located and purchased a complete 2013 Ford Escape Speedometer Cluster from an online source for just a few dollars, which saved a decent amount of money - I then removed the display screen from the speedometer cluster and installed the display screen into my Escape - All good, thanks again for the excellent video... \m/
Saving money is saving money! Nice work and thank you for watching!!
Thank you for this tutorial a customer asked me if I could do it I was freaked out as I just do mechanical work but with your tutorial this helped out a lot to do it for him
So glad it helped!!
Thank-you BongBong! I changed my LED screen out myself, very empowering! Thank you again!
WELL DONE! You should feel great and empowered!! Glad it was helpful and thank you so much for watching and taking the time to comment. It means a lot!
If I could buy you dinner I would😂 ford estimated $1600 to fix it. Just fixed it myself for $40 with your help. Thank you for this video!!!
Well done!!! Thank you for watching and taking the time to comment!
Thank you so much managed to do my own because of your video. I have the 160mph speedo on a 2016 Focus Zetec S so I needed the screen with brackets. I had ordered the screen without but it was easy enough to swop the frames over.
Thanks for the help!! Worked great. I bought a screen that didn't have the screw tabs, but I just had to switch the aluminum casing from my old lcd to the new one CAREFULLY! Awesome! Was on a 2015 Focus ST, just didn't bring back my fuel economy with it, but everything else works great!
Ryan O'Connor what screen did you buy and from where? Mine went out. Does mpg just read 0?
I just followed this and I now have a working display! Fantastic. ... Now I need to do the radio/sat-nav display as that doesn't work either. Fingers crossed it's a similar process! :D
Thanks, Bongbong! Really simple and helpful video. As an FYI to folks...my 2014 Ford Escape SE has a speedometer that is numbered to 140 mph, but then has additional hashmarks that would take it to 150 mph (but it does not have "150" on the dial). There are two LCD screen options - one for 140 mph speedometers and one for 150 mph speedometers. Some of the guidance has said to go with the 140, since it doesn't say 150. Before you do that, take the cluster out and look. Mine is held in by two 7mm bolts/screws (not Torx), and the cluster doesn't have clips holding the cover on. It has four Torx screws. When I took it out and apart, my LCD screen is the 150 mph one that does not have the screw brackets on the sides. That is the one I ordered (through your affiliate program, Bongbong - you're welcome ;-)). Hopefully it will all work correctly.
Tim, thank you for taking the time to share all of that information with everyone! That's very helpful and I definitely didn't know any of that. I hope that will be valuable to others. I truly appreciate you ordering through my affiliate link and also taking time to watch my video. Cheers!
@@FixitBongbong New LCD screen arrived today. Took the old one out and the new one went in like a charm! Hooked it back up and it worked! Looks just like the original. Hopefully, it will last a long time. Thanks again for making the process super easy! "Mechanics-style" gloves with a little grippy-ness helped me pull the old cluster (it is held in by two clips). It was a little plasticky-slick for my fingers.
@@timkeeton4548 Heck yeah nice work!!!
FWIW, I had ordered the wrong screen type, but by carefully removing the metal housing off both the screens I was able to swap them around so the new one fit securely using the old housing. Would recommend buying the right screen in the first instance, but not the end of the world if anyone does get the wrong one...
New screen installed and the instructions made it super straightforward. Thanks!
I got it all done in under 10 minutes, this was awesome!
Well done! Thank you for watching and commenting!
Oh my THANK YOU… my daughters 2014 Escape needed this replaced and she has to put money into other repairs 😑 so I attempted this (me…57 year old women)😂… it works perfectly. Aside from my husbands strong hands to pull out the gauge cluster from the dash my tiny hands worked great for getting into the small spaces…this saved her so much money!
This makes me so happy to hear!!! Way to go, you win mom of the year!!!
@@FixitBongbong 🤣🥰
It really was that easy. Thanks...saved me hundreds as well.
You are awesome my friend. Excellent video. You have a great knack for teaching. Thanks again Jim
Thanks for the video! My problem was general mayhem, so I added a touch of solder to each of the connector joints and it fixed it!
Oh very interesting, your cluster just had cold joints? Reflowing fixed the LCD issue?
@@FixitBongbong The LCD was not my problem. We had the issue where the TPMS light would turn off and on, the AC would blow cold then warm, the radio volume would get soft and loud, and a couple of other issues. I added some solder to the wiring harness connector joints and that fixed the issue. I guess there was cracks in the original joints, but I guess they were too small for me to see. I watched your video and another video and then I felt comfortable enough to do the fix. Thanks!
THANK YOU soo much!!! Ford Dealer wanted $586 just for the cluster!
Hell yeah! You're welcome! $586 is actually really cheap from the dealer.. either way its a whole bunch saved. Thanks for watching!
You have literally saved me a ton of money!!! Thank you 😊
So glad to hear it. Thank you so much for watching!
Thanks for the info, just installed mine, Excellent.
Thanks! Just swapped it out in my wife’s Ford Escape and this video made it a breeze.
Nice work and thanks for watching!!
For that work, I hope Ricky got you some more Miller High Life !!
Seriously though, THANK YOU for this video. I just picked up a 2016 Focus ST. The speedometer starts at 6 o'clock, so when it says 20 MPH, I'm doing like 50. I need to get in there and adjust the needle. This is helpful beyond words.
It's been a few years.. but I think he actually did get me a six pack. 😂 Thank you so much for the kind words, I hope the video helps you out with the needle adjustment. I'm more curious as to how they got out of adjustment. Keep me posted and thank you for watching!!
@@FixitBongbong No idea. I'm a second owner. I'm assuming the first owner just used the digital display and was too lazy to get it fixed when it had the warrantee. I'll deal with it eventually. I'll post the results.
Thank you for the reply. :-)
Did you buy the one with brackets or without brackets?
Thanks so much for this content i really appreciate it. It helped a ton
You're welcome! Thanks for watching!!!
Thank you followed directions and successfully completed saved at least 300 usd. CHEERS
Love to hear it! Well done and thank you for watching!!
Subscribed
Perfect how-to, thanks Bangbong!
Thanks. I had to fiddle with the ribbon cable as it wasn't seated properly first but you helped me save a lot compared to what I got quoted. I did this in Ford focus 2016 diesel 1.5 ecoboost for reference
Thank you so much!
I thank you for video it's very useful, I have a ford focus 2012 having an issue with multi-function LCD which LCD brightness not working but if you see very carefully all the relevant information coming to the display, in that case, shall we need to replace LCD or problem something else.
your reply will be appreciated.
Hey! Thanks so much for this!! You saved me 1000$ and I made me feel so proud that I managed to do it. I'll be bragging for weeks 😆
Hey way to go!! You should feel proud! You taking the time to watch my video and leave a comment is much appreciated so thank you!
Works perfect on a late 2015 cmax appears to be identical, having trouble locating a replacement in the uk though.
Thanks for the video . Very Helpful.
Thank you so much with my problem I just had to disconnect the harness from the instrument panel and that reset everything
super helpful. Gonna save a lot of money. Could you just list which tools are needed? I might have to get some. Thank you very much, you're doing a good service.
Thanks for helping me out step by step
Thank you for watching my video!
Omg thank you for this video it help me out a lot and save my self some money doing it on my own
Thank you for the video. Worked Great.
Glad to hear it thanks for watching! Please subscribe!
Thank you so much. I would have paid 1000 at the dealership. It was very easy.
Thanks Bong! Galing mo ⭐️⭐️⭐️⭐️⭐️
I just fixed my car!! Thank u so much
Nice job!!!
Thanks for all the comments and feedback everyone! Here's some additional information to some common questions I'm getting: "What is the OEM part #?" - I'm not sure this part is available for purchase from the dealership since the cluster wasn't intended to be serviceable. Ford would rather just sell you the entire cluster. "Where do I buy this LCD screen?" or "Where do I buy this in my country?" - This was a customer provided part so I'm not sure where they purchased the screen in the video, but on a quick google search "Ford focus LCD screen replacement" I found multiple suppliers in the US and in Europe who sell this part. Hope this helps!
im having a hard time finding a video to help me woth my 2011 ford fusion, i wanted to change the blue color of my cluster but i can't seem to find a single video on it
The part code is read in the back of the screen, visible at 5:00 sharp. In this case it was LQ042T5DZ14B. Manufactured by Sharp. I changed a similar screen on my 2011 Focus, but on the navigation display. These were for me practically only available from china, although very cheap.
Bro, thank you so much. It works perfect now
Glad to hear it! Thanks for watching!
Thx for the video! I replaced my broken screen for a screen that came out of a damaged car (ford Focus from 2014, i have one from 2013) and everything is working! You saved me 1400 euro!
Nice work!! Where in Europe are you watching from? Either way, thanks for watching. Please subscribe! Cheers!
@@FixitBongbong i live in the Netherlands.
@@WRStam So cool! I've visited Amsterdam years ago.. hope to explore other places!
@@FixitBongbong So i got a question :) you helped me out last year with this screen and now the middle screen got the same problem. Is it almost the same idea with replacing that screen or is it more difficult? New screen and install at the garage will cost me around 600 euro's. you helped me out big time last year so maybe you can help me out again :)
@@WRStam You mean the one located in the dash? If so I'm not certain this is as simple since it would be part of the audio head unit. If it were, unfortunately I do not have the part number or source for that item.
thank you for this video. i basically fixed it for the same price ford were trying to charge me just to look at it lol
You're welcome!! Thank you for watching!!
good job friend. contratulations from spain
Thank you friend!!
I’m a huge fan of beer, not to much on Miller High Life, but I like you even more if you are a beer drinker. Nice touch
Nice work! My dealer quote was $950 parts and labor.
Woof... I hope the video was helpful in saving you some money!
great great and easy information ,thanks
Thank you!
Thanks!!! I just completed my swap successfully!!! Is the screen the same for the media?
Thanks so much. My escape cluster screen went black and I thought it was a fuse. The dealer told me $179 and it will not pass state inspection here in VA if that screen does not work. I will try this myself.
great video superb detail thank you for sharing . i have a question only two lcd you list in link is 140 and 150 mph my focus cluster has the 160 mph thank you
Your video was a life saver & 💰💰 saver! Thank you sooo much
Thank YOU so much for watching!!!
Also.. way to go for knocking this out yourself!
Fix it Bongbong I had full confidence in myself after watching your video 10 times. I’ve even been able to pass it along & help another women all thanks to you
@@maggiemiller5109 I absolutely love that. I hope this successful project has inspired you to try to take on more DIY things with your vehicle or others! Cheers!!
Fix it Bongbong yes definitely I have ordered the tail light and am fixing that myself too all from watching videos. You are appreciated for your content & helping others! Thank you again!
very good job bravo
I gave this a like definitely well deserved. But I noticed on the links you shared to purchase at Amazon that the 150mph lcd does not have the brackets for the screws unlike the 140mph lcd with brackets. Maybe update your link with one that has the brackets
This was perfect!
Thank you!!
Bro miso glad I found this vid. Now need to fix me daughters car. You have a certain place to order the replacement part. I would hate to buy the wrong one.
There are a number of places to find the part online. Ranging in prices from $25-100. Quick google search should lead you to some great reputable ones!
Helpful video
Thanks have a qastion about fit this display to ford escape 2014 ?
Hi , thanks for the video, Is there any LCD replacement for Ford Ecosport Trend 1.5 gas Ti-VCT 82kW?
The only part that gave me any trouble was getting the ribbon to lock in. It's a bit short but persevere. They say to not touch the screen so I wore latex gloves and peeled off the protective plastic when it was locked in place. Total cost was 45 dollars Canadian.
thank you for your video on replacing the screen on the ford focus its really helpful. i install a new screen dint work then i install a complete instrument cluster and it did not work. do you have any other recomendations greateley apreciated thanks again for that great work you are doing
Oh very interesting.. I would start with the basics first like fuses. It sounds like there's an issue on the vehicle side before the cluster.
Thank you so much!
thanks for the video but im struggling to find the part to purchase and do the serial numbers etc ( BM5T-10849-MV ) have to be the same if i can get a second hand part or could you tell me the web site that i could get the screen from please .
Hi Bongbong, I recently bought a used 2016 Ford Transit Connect Cargo XLT, and this info screen crapped out on my after a few months. Would this LCD also be compatible??? I can't seem to find the right one doing a google search. Any info you can provide would be greatly appreciated it. Thanks.
Hi, is it possible to change the right side number plate with speed indication mph-km/h to only km/h ?