Very informative and hands on. Two things: --the cars with MAF sensor will not prime the fuel system until key is in start. Taking out the starter relay from fuse box and turning key to start will prime the fuel rail We should look on the joint between injector and fuel rail to check for leaks -- 6:55 not a bad idea to spray carb cleaner at the injector to head seals with engine idling to check for the vacuum leaks, because some aftermarket parts are too loose and allow air leaks at this point leaning the mixture and causing higher than normal fuel trims.
Thank you for all your how-to videos. They are detailed, and your camera doesn't shake so much that it makes the viewer nauseous. I've been able to complete a lot of repairs with your help, and I stopped getting shafted by crooked mechanics.
Thanks to your video I did it on my Matrix XR 05 awd whitout any help and it ends perfectly. Just for be clear I’m not a mechanic but I like do stuff on my own risk.
Your storefront lists this part as incompatible with my 2003 Corolla CE. So I ordered a part was compatible (its green colored instead of blue like this one) and it came with no lower rubber seals. Im confused
I think it's best to add how to depressurize the fuel line first. Like pull out the fuel pump relay or fuse and start the engine until it dies. I believe you should have done it otherwise the gasoline would be gushing out of the fuel rail.
Fun fact, on the Toyota Echo they add a useless piece on the engine top that stops you from removing that hard steel line so you have to remove the entire top of the engine to replace a single fuel injector.
Great video, thx! I would think twice about spraying brake cleaner onto anything rubber... (Too aggressive chemically) Carb cleaner is a different story: these seals should be made to withstand petroleum distillates
How do you de-pressurize the fuel line? I have an 06 corolla, and took my injectors out without doing so and a little fuel came out and got on the intake manifold
Wow, that was exceptional. Great info, to the point with no wasted time! Thanks! I have a 2007 Corolla. A mouse chewed the wires on #4 injector and although I repaired the wires it is still throwing a code for #4 cylinder not firing. Do you think it damaged the injector or the computer when the wires were shorted?
I replaced the fuel injectors on a camry 09, but now i have a hard start-up, and it starts up on the second or third key turn But when i replaced them, i removed the fuel rail bar out of the engine fuel line Do you thing thats is the problem and have air in the fuel line?
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is perfect timing to post this video, I literally just got my new injectors for my corolla today, about an hour ago
Very informative and hands on.
Two things:
--the cars with MAF sensor will not prime the fuel system until key is in start.
Taking out the starter relay from fuse box and turning key to start will prime the fuel rail
We should look on the joint between injector and fuel rail to check for leaks
-- 6:55 not a bad idea to spray carb cleaner at the injector to head seals with engine idling to check for the vacuum leaks, because some aftermarket parts are too loose and allow air leaks at this point leaning the mixture and causing higher than normal fuel trims.
Just saved yourself about $400-$500. This is a good video, very helpful.
Came here before helping my friend with her Matrix! Perfect. Such a good call about the brake cleaner! Thanks much!
Why do car dealerships charge $800 - $1200 for this job? I don't get it.
So informative ! My problem was the debris around the area that was getting between the O ring.
Thank you for all your how-to videos. They are detailed, and your camera doesn't shake so much that it makes the viewer nauseous. I've been able to complete a lot of repairs with your help, and I stopped getting shafted by crooked mechanics.
Thanks to your video I did it on my Matrix XR 05 awd whitout any help and it ends perfectly. Just for be clear I’m not a mechanic but I like do stuff on my own risk.
+Carlos Flores Thanks for watching our video! 1aau.to/m/Shop-TRQ
Nicely edited, quick, thorough.
Thanks for the videos, just ordered some TRQ fuel injectors!!
I have watched several videos and yours is the best.
😢Very informative and well filmed video. Quite helpful. Thanks!
Do i need to depressurize the fuel line first?
So nice video. But mi big concern is. You not need to disconnect the negative battery terminal. To do rhis process?
Another great job . Well done kid!
Thank you so much a little tricky with the seal up but thanks a million!!!
I could say 500-1000
Very good video. Thank you very much from Argentina.
Your storefront lists this part as incompatible with my 2003 Corolla CE. So I ordered a part was compatible (its green colored instead of blue like this one) and it came with no lower rubber seals. Im confused
I think it's best to add how to depressurize the fuel line first. Like pull out the fuel pump relay or fuse and start the engine until it dies. I believe you should have done it otherwise the gasoline would be gushing out of the fuel rail.
Fun fact, on the Toyota Echo they add a useless piece on the engine top that stops you from removing that hard steel line so you have to remove the entire top of the engine to replace a single fuel injector.
Wait dont you have to release fuel pressure 1st?
I must have broken my seals while putting the fuel rail back in, I didn't even think about putting it in by hand before tightening the bolt
There's a whole lot of fuel leaking out from the rail
Wish I saw this video before. I definitely ruined my own injectors doing them the first time
thank so much for your help 😊
Great video, thx! I would think twice about spraying brake cleaner onto anything rubber... (Too aggressive chemically) Carb cleaner is a different story: these seals should be made to withstand petroleum distillates
Presente en clases desde Navojoa Sonora México Like 🎉
Very helpful video😊thanks alot by sharing these kind of video. Musch appreciated
How do you de-pressurize the fuel line? I have an 06 corolla, and took my injectors out without doing so and a little fuel came out and got on the intake manifold
Thanks mate legend
Do I have to program the fuel injectors ?
I replaced mine and now have a p0171 code
Instead of carb cleaner, can you use mass air flow cleaner or electrical contact cleaner when installing the injectors and manifold?
Do i need to take out the battery clip before changing that injector?
Was that a good sound of the engine 🤔 because I have the same car in the uk and this sound is driving me crazy
Awesome video, thanks
Worked perfect tyank you so much 👌
Wow, that was exceptional. Great info, to the point with no wasted time!
Thanks!
I have a 2007 Corolla. A mouse chewed the wires on #4 injector and although I repaired the wires it is still throwing a code for #4 cylinder not firing.
Do you think it damaged the injector or the computer when the wires were shorted?
Do you need to disconnect the fuel line into the fuel rail not just the bracket?
How we know we need to change the injectors ??
I replaced the fuel injectors on a camry 09, but now i have a hard start-up, and it starts up on the second or third key turn
But when i replaced them, i removed the fuel rail bar out of the engine fuel line
Do you thing thats is the problem and have air in the fuel line?
Thank you for this video
Very helpful video
great video!
How many holes does the Toyotal Allion 2003 fuel injector has?
my car compression is leaking through 1 injector seal,i dnt know where is the problem
Good job sir
so no one's not gonna ask if u take out the fuel injector fuel is not gonna come out shooting
Will this be the same process on 02 Toyota rav4?