I’d recommend to learn polishing with a rotary as fast as it is possible. Because, it will give You the basics of feeling the instrument and how it works. I started with a standard flex da with 15mm throw. Then I had the chance to work for 6montha in a great company in my country with just using rotary although we had every instrument you could imagine from rupes, flex etc. Now I am using a forced rotation since I am starting my own business and I have secondary tool which is a smaller da with 70mm backing plate.
I was watching my buddy polish with a cheap chemical guys polisher.. it would not even rotate.. he did the whole vehicle, and told me “ it’s not suppose to spin” 🤦♂️
Great job on the video! I have many different DA’s but by far my rupes is the best. I just ordered a rotary rupes they were actually on sale, which they normally never are, so I had to get one!
Love my 15 and 21. 15 is my favorite. If you watch the C.O.R.E Series from Rupes you will see the benefits of a DA and how its more effective. Nice video Sir.
We love the Rupes machines, such nice tools to work with. LHR15 DA and LHR75 Bigfoot mini if budget allows. Can pretty much do anything with those 2 tools. Mini is perfect for bumpers and tight curves, great tool.
Nice video, I have recently purchased the Mille but haven’t had chance to use it yet. I’ve been using a Vertool Force Driven for the last 12 months and feel like I have now mastered using it properly. I do love how quick it cuts and getting into tight areas without bogging down, saves a lot of time from swapping out to smaller machines. Like you say just have to keep it flat as much as possible. Cheers, Matt (M.R Detailing)
Class video! Can't wait for you to open again. I use the rupes bf mk2 and absolutely love it. Came from rotary to a knock off das6 (i think its called). Id like to try the forced rotation on tight bits as i keep swapping to a small rotary for tight bits on corrections
There are so many misconceptions regarding the Rotary. You mentioned the one comment that many people falsey make. Rotary Polishers of the past where heavier and yes were set at much higher speeds. Now a Rotary Polishers actually can be just as easier to use and "hung on too" than even a DA!. Speeds start as low as 400rpm up to 2500-3500 rpm. These speeds are lower than most DAs. Second Holograms. Yes if your not familiar on how to properly use Rotary as in using it with no product left a d are dry polishing that will happen. However, on a the other hand Micro marring or DA haze is an issue well more with DAs. Rotary Polishers these days can be just as easy to use for a beginner as a begginer using a DA. I have used both and they both have there purposes.
I have a LHR15ES an a lhr75 but want a spare machine considering a flex da but have been looking at the mille but rupes reccomend only using dedicated pads whats your view ?
Another Great video James. Very informative. Question for you, do you use/have a rupes ibrid ?? Never seen your with one 😀. What do you use for the intricate areas 👍
Yellow pans DA Fine might be a bit more practical as far as having more versatility. However, Uno Pure may work. As well. I honestly haven't experimented with its cutting potential. The Duetto is what I use for most of all the polishers I use.
Best polisher for me is a Bauer 20mm dual action. $89 bucks and works fantastic! Love the Rupes, but I am just my own detailer and cannot justify several hundred dollars for one.
I just went b@lls deep.... LHR15 MK3... LHR75.... and a barely used ibrid nano off ebay Then got a pressie of a Flex pxe80 and a bargain unused Flex cordless forced rotation....
I’d recommend to learn polishing with a rotary as fast as it is possible. Because, it will give You the basics of feeling the instrument and how it works. I started with a standard flex da with 15mm throw. Then I had the chance to work for 6montha in a great company in my country with just using rotary although we had every instrument you could imagine from rupes, flex etc. Now I am using a forced rotation since I am starting my own business and I have secondary tool which is a smaller da with 70mm backing plate.
I was watching my buddy polish with a cheap chemical guys polisher.. it would not even rotate.. he did the whole vehicle, and told me “ it’s not suppose to spin” 🤦♂️
I sold my Mille. Long throw cuts a lot faster if know how to use it.
Another top video, definitely want to come for some training when we can!
Thanks, yes.. normality is hopefully on the horizon!
Great job on the video! I have many different DA’s but by far my rupes is the best. I just ordered a rotary rupes they were actually on sale, which they normally never are, so I had to get one!
Nice one! Thanks for commenting!
What are the benefits/advantages of the Rupes Mille when compared to the Flex 3401 and via versa?
Love my 15 and 21. 15 is my favorite. If you watch the C.O.R.E Series from Rupes you will see the benefits of a DA and how its more effective. Nice video Sir.
Thankyou. Yes I teach the CORE series for Rupes so I'm well aware of its benefits!
@@detailingyoda1652 Of course Sir, that was intended for other readers of the comments to help them with more great info.
Cut with a Flex 3401 VRG and polish with the rupes LHR15ES.
We love the Rupes machines, such nice tools to work with. LHR15 DA and LHR75 Bigfoot mini if budget allows. Can pretty much do anything with those 2 tools. Mini is perfect for bumpers and tight curves, great tool.
Super informative James.
I have a good DA just now but think the 15 might just be on my wish list now.
Nice video, I have recently purchased the Mille but haven’t had chance to use it yet. I’ve been using a Vertool Force Driven for the last 12 months and feel like I have now mastered using it properly. I do love how quick it cuts and getting into tight areas without bogging down, saves a lot of time from swapping out to smaller machines. Like you say just have to keep it flat as much as possible.
Cheers, Matt (M.R Detailing)
Love to know what you think of the Mille Vs the vertool!
The solution is MAKITA P0500C Dual action random orbit polisher. The ONLY ONE with a switch to go random or orbital random😎
Class video! Can't wait for you to open again. I use the rupes bf mk2 and absolutely love it. Came from rotary to a knock off das6 (i think its called). Id like to try the forced rotation on tight bits as i keep swapping to a small rotary for tight bits on corrections
There are so many misconceptions regarding the Rotary. You mentioned the one comment that many people falsey make. Rotary Polishers of the past where heavier and yes were set at much higher speeds. Now a Rotary Polishers actually can be just as easier to use and "hung on too" than even a DA!.
Speeds start as low as 400rpm up to 2500-3500 rpm. These speeds are lower than most DAs.
Second Holograms. Yes if your not familiar on how to properly use Rotary as in using it with no product left a d are dry polishing that will happen.
However, on a the other hand Micro marring or DA haze is an issue well more with DAs.
Rotary Polishers these days can be just as easy to use for a beginner as a begginer using a DA.
I have used both and they both have there purposes.
Hello Mate can the Mille run the Rupes wool pads
I have a LHR15ES an a lhr75 but want a spare machine considering a flex da but have been looking at the mille but rupes reccomend only using dedicated pads whats your view ?
Another Great video James. Very informative. Question for you, do you use/have a rupes ibrid ?? Never seen your with one 😀. What do you use for the intricate areas 👍
Yes the Nano is a great tool!
Hello James. Do you find that the Mille or Rupes 15 can finish out a car the same? Heard the gear driven doesn’t finish out as well on softer paints.
Opinion on the Duetto being my first polisher?
I would like to just polish not paint correct, thinking yellow pad and uno pure.
Yellow pans DA Fine might be a bit more practical as far as having more versatility. However, Uno Pure may work. As well. I honestly haven't experimented with its cutting potential.
The Duetto is what I use for most of all the polishers I use.
Best polisher for me is a Bauer 20mm dual action. $89 bucks and works fantastic! Love the Rupes, but I am just my own detailer and cannot justify several hundred dollars for one.
I just went b@lls deep....
LHR15 MK3... LHR75.... and a barely used ibrid nano off ebay
Then got a pressie of a Flex pxe80 and a bargain unused Flex cordless forced rotation....
Ha, nice one.. you always need more machines... n+1 rule!
@@detailingyoda1652 that was my theory and they are nice to look at
Mlo0