For anyone that just got there nitro deck i just got mine today and straight out of the box it was not working with my pokemon scarlett and violet edition switch oled no buttons worked i plugged my charging chord in the input section and went to system settings with it still plugged in by using the touch screen then went to controllers and sensors and turned on pro controller wired communication and now it works took the charging chord out of the input on the nitro deck and all the buttons work now very weird
@@SneakerFanaticTelevision I hope it works for you as well i just figured I'd comment what worked for my switch I've been playing Mario wonder for around 30 mins or so and it hasn't disconnected or nothing so far knock on wood also I've left the wired communication on in the settings when I turn it off the buttons go back to not working and I tried to update my controller on the nitro deck and it shows the bar but then I get a pop up saying there's an error to try and update the controller
I bought a black nitro deck was working great so I bought one of the limited edition purple ones with the case and after about a week the black one stopped working so I switched to the purple one no issues and after about 2 weeks this one don’t do anything it lights up and I got wired controller turned one but nothing happens no mater what I do I tired holding the reset button in but I don’t think that does anything at all I have a V2 switch and love it cause I take it to work for when I have down time. One nitro deck maybe but 2 there’s some issues with them
Also have a black one and doing all possible troubleshooting convinced me it might be the unit itself and had it replaced. Already have the replacement and still having the issue of it not working, mine only works for a few seconds after getting it out of sleep mode though then stops. It powers the deck fine, works seamlessly docked and I dont think theres anything wrong with my usb port on it. Only thing I havent tried is resetting the switch itself. Could it be a software incompatibility issue with the v2? I really want to try the full reset of the switch but cant lose all my saved data :( Definitely dont want to have any other colorway for the nitrodeck, I like the black one best and also dont think I would want and settle with just purchasing another one just for it to work
It is on and I just literally tried it again when you text and it started working once I put the switch in started to play donkey Kong exited went into the shop and bought a game and I put my numbers thru the screen idk if that had anything to do with it ? But when I went to pick it up I accidentally held down the back button the very bottom one to the right if you are holding it in front of you. Does it lock ? But after that it stopped again
I have a new oled and just got the nitro deck in today and it wont work at all. *Edit so i fixed the problem by simply holding the power button down on the switch till it brought up "power options" and turned it completely off. When it turned back on, the Nitro Deck now works perfectly.
This is what worked for me (V1 Switch and Nitro Deck Plus). With the Switch in the Nitro Deck the entire time: 1. Plug in the charging cable to the Nitro Deck. 2. Press and hold the CRKD button until it flashes. (I think this is bluetooth mode) 3. On the Switch go to Controllers, then select change grip/order. 4. Press the L and R buttons. (mine finally connected). 5. Unplug the charging cable. (Mine lost connectivity as a controller). 6. Press the L and R buttons again. (Mine then reconnected and started working normally)
can i ask if yall charge your switch on the Nintendo dock or charge thru the nitrodeck? u think charging thru the nitro deck may be causing the problems ??? u know like the 3rd party chargers were messing up switches???
Same problem but it started after I updated the oled ..it originally worked ...didn't play for a year and when I picked it back up it worked then i updated and now it won't work unless plugged into the wall even bought a new one thinking my old was broken and still the same
I received mine yesterday and it only worked for 5min after that it stopped connecting. I also have a Switch OLED and tried multiple solutions shared online
That’s odd. I have the Zelda model and it works great in my nitro deck. I saw that you have the wired connection on so not sure what’s up but my oled does work.
Any guaranteed fix for this? Just got mine today and i have a v2, worked fine for a couple of hours then it just stopped. Contacts are fine they charge, joycon rails tight, it charges and it even powers the nitro deck but the buttons arent working
@@michaelneilvalencia2205 you need me to make a separate video for your dumba** showing you that that will not fix it? Cause why do you think that hasn't been tried already? There's only so many things you can do. I've done them all.
Just received the Nitro Deck and I am unfortunately having the same issue with my OLED Switch :( It is a black edition. I am now contacting their support and hoping for either a workaround or refund. In my case though, it actually works for a few seconds sometimes, but then afterwards it would stop being responsive. I've heard from the others that it works for their OLED Switch though, so it could basically be narrowed down to just a few possibilities: 1. My OLED Switch has a faulty USB-C port 2.This batch of Nitro Deck is defective 3.Nintendo ruined the USB-C port of OLED Switch with one of its firmware updates I really hope it's fixable, love the product but hate the fact that I can't use it.
It's crazy you say that about the update firmware. On my initial opening, it worked on my OLED. I updated to continue playing while recording video of it in my hand and after that update, it no longer connected. I have to finish my review and update it. Because it shows it working straight out the box. 5 mins later after the update, it no longer connects. That was the one switch I had that wasn't updated so I could use the Tears of the Kingdom glitches. I beat the game so I needed to update it to transfer my other saves to that Switch. It hasn't worked since that update.
@@SneakerFanaticTelevision Here’s an update from CRKD, they just replied to my support ticket. I think this part is the key point: ------ Issue 3: My Nitro Deck's LED lights up but is totally unresponsive with my switch. Possible Solution: If the Nitro Deck's LED is functioning but it doesn't respond when connected to your switch, follow these steps: 1. Ensure that the "Pro Wired Controller" option is enabled in your switch settings. 2. Check that there are no Joy-Cons or other controllers connected to your switch. 3. Try connecting the Nitro Deck to another switch (if available). 4. Try connecting a pro-controller via the USB-C port on the bottom of your Switch (if possible). If the Nitro Deck still doesn't work on the second switch, it's likely a fault with the Nitro Deck itself. In this case, please return it for a replacement under warranty. *If the Nitro Deck works fine on the second switch, the issue may be with the data line in the USB-C port of you switch.* Such faults can sometimes go unnoticed, especially if you primarily use handheld mode with Joy-Cons or connect via Bluetooth with a controller. Even if the power and video output via USB-C seem fine, the data line could be damaged or worn. ------ Yeah actually I think it’s the data line that is having issues. My ROG Cetra RGB, which uses the USB-C port, doesn’t work with the OLED Switch most of the time just like the Nitro Deck. However it does work fine with the V1 Switch I own. It makes me wonder why the data line is so fragile on the OLED model. I mean the V1 Switch was here since the month Switch launched, and for some reason it does better on this part than the OLED. Seriously what did Nintendo do with the OLED Switch? Now my plan is to sell my current OLED and get another one from the secondhand market.
@@riocheng0205 same for me with both Nitro deck and Nexigo Gripcon 2, both start working but after 3 minutes do not. At the end do you solve your issue with repairing for a new usb c port on the switch oled?
I fixed the problem by doing a hard reset on my switch. Hold the power button, till power options pop up then turn it off completely then turn it back on.
Works fine with mine got the snes edition when when it first came out works fine and got the hellboy edition and works fine iono why I keep hearing this about the OLED not working
That's a shame, just got mine today and got this exact issue hence how I ended up here. Found a few others and a few Reddit posts too having identical issues. Did it ever work for you on that OLED? Sorry if you said and I have missed it but mine worked for maybe 45 seconds when configured initially and now just light up but doesn't respond. Everything else about the port is fine though as did all the tests and checked it etc.
Yes I have the white oled as well have no issues with either of my ND’s got the hellboy edition recently and nothing wrong just like my SNES edition when it first came out.
It’s your usb port dude either it’s dirty or jus doesn’t work that’s how the nitro deck connects not the rails it’s not the product or the railing it’s your switch!😊
The fact it works with the other switches and just that one says to me it's an issue with the USB port on that one switch. I have two oleds and neither has this issue. It's also the first I've seen of it and even for you it's only happening to this one? Definitely sounds like a port issue.
For anyone that just got there nitro deck i just got mine today and straight out of the box it was not working with my pokemon scarlett and violet edition switch oled no buttons worked i plugged my charging chord in the input section and went to system settings with it still plugged in by using the touch screen then went to controllers and sensors and turned on pro controller wired communication and now it works took the charging chord out of the input on the nitro deck and all the buttons work now very weird
I'm going to try this
@@SneakerFanaticTelevision I hope it works for you as well i just figured I'd comment what worked for my switch I've been playing Mario wonder for around 30 mins or so and it hasn't disconnected or nothing so far knock on wood also I've left the wired communication on in the settings when I turn it off the buttons go back to not working and I tried to update my controller on the nitro deck and it shows the bar but then I get a pop up saying there's an error to try and update the controller
Thank you so much dude it worked
I fixed the problem by doing a hard reset on my switch. It now works perfectly.
@@gurtlord a hard reset like wipe the switch? Or holding the power button to turn it off?
i have the same problem but my friend have the Splatoon oled and does not have any issues
Ensure that the "Pro Wired Controller" option is enabled in your switch settings.
I bought a black nitro deck was working great so I bought one of the limited edition purple ones with the case and after about a week the black one stopped working so I switched to the purple one no issues and after about 2 weeks this one don’t do anything it lights up and I got wired controller turned one but nothing happens no mater what I do I tired holding the reset button in but I don’t think that does anything at all I have a V2 switch and love it cause I take it to work for when I have down time. One nitro deck maybe but 2 there’s some issues with them
That's facts. Too many ppl having the same issue. We need to bring more attention to this.
Also have a black one and doing all possible troubleshooting convinced me it might be the unit itself and had it replaced. Already have the replacement and still having the issue of it not working, mine only works for a few seconds after getting it out of sleep mode though then stops. It powers the deck fine, works seamlessly docked and I dont think theres anything wrong with my usb port on it. Only thing I havent tried is resetting the switch itself. Could it be a software incompatibility issue with the v2? I really want to try the full reset of the switch but cant lose all my saved data :( Definitely dont want to have any other colorway for the nitrodeck, I like the black one best and also dont think I would want and settle with just purchasing another one just for it to work
Ensure that the "Pro Wired Controller" option is enabled in your switch settings.
I have a older model and it was working then just stopped while I was playing and I haven’t been able to get it to work since
I tried it on my friends oled and it worked so what happen ?
Ensure that the "Pro Wired Controller" option is enabled in your switch settings.
It is on and I just literally tried it again when you text and it started working once I put the switch in started to play donkey Kong exited went into the shop and bought a game and I put my numbers thru the screen idk if that had anything to do with it ?
But when I went to pick it up I accidentally held down the back button the very bottom one to the right if you are holding it in front of you.
Does it lock ?
But after that it stopped again
I have a new oled and just got the nitro deck in today and it wont work at all.
*Edit so i fixed the problem by simply holding the power button down on the switch till it brought up "power options" and turned it completely off. When it turned back on, the Nitro Deck now works perfectly.
That didn't work for me I bought mine off of Amazon I'm pissed I was really looking forward to using it. Oh well gotta return it.
Yeah same here. Didn't work for me
This is what worked for me (V1 Switch and Nitro Deck Plus). With the Switch in the Nitro Deck the entire time: 1. Plug in the charging cable to the Nitro Deck. 2. Press and hold the CRKD button until it flashes. (I think this is bluetooth mode) 3. On the Switch go to Controllers, then select change grip/order. 4. Press the L and R buttons. (mine finally connected). 5. Unplug the charging cable. (Mine lost connectivity as a controller). 6. Press the L and R buttons again. (Mine then reconnected and started working normally)
can i ask if yall charge your switch on the Nintendo dock or charge thru the nitrodeck? u think charging thru the nitro deck may be causing the problems ??? u know like the 3rd party chargers were messing up switches???
I have this same issue with my oled and this started today. I have to leave the charger plugged into the nitro deck for it to work on my switch oled.
I will try that
Did it work?
@@brendanlm no
@@SneakerFanaticTelevision dang
Same problem but it started after I updated the oled ..it originally worked ...didn't play for a year and when I picked it back up it worked then i updated and now it won't work unless plugged into the wall even bought a new one thinking my old was broken and still the same
I received mine yesterday and it only worked for 5min after that it stopped connecting. I also have a Switch OLED and tried multiple solutions shared online
That’s odd. I have the Zelda model and it works great in my nitro deck. I saw that you have the wired connection on so not sure what’s up but my oled does work.
Any guaranteed fix for this? Just got mine today and i have a v2, worked fine for a couple of hours then it just stopped. Contacts are fine they charge, joycon rails tight, it charges and it even powers the nitro deck but the buttons arent working
No fix that I know of. still does not work on my OLED
@@SneakerFanaticTelevisionyou just need to restart the OLED and it will work. Stop spreading misinformation
@@michaelneilvalencia2205 I'm not sure why you think you know everything I've done and the troubleshooting I've done with CRKD. Get the fk outta here.
@@michaelneilvalencia2205 you need me to make a separate video for your dumba** showing you that that will not fix it? Cause why do you think that hasn't been tried already? There's only so many things you can do. I've done them all.
Just received the Nitro Deck and I am unfortunately having the same issue with my OLED Switch :(
It is a black edition. I am now contacting their support and hoping for either a workaround or refund.
In my case though, it actually works for a few seconds sometimes, but then afterwards it would stop being responsive. I've heard from the others that it works for their OLED Switch though, so it could basically be narrowed down to just a few possibilities:
1. My OLED Switch has a faulty USB-C port
2.This batch of Nitro Deck is defective
3.Nintendo ruined the USB-C port of OLED Switch with one of its firmware updates
I really hope it's fixable, love the product but hate the fact that I can't use it.
It's crazy you say that about the update firmware. On my initial opening, it worked on my OLED. I updated to continue playing while recording video of it in my hand and after that update, it no longer connected. I have to finish my review and update it. Because it shows it working straight out the box. 5 mins later after the update, it no longer connects. That was the one switch I had that wasn't updated so I could use the Tears of the Kingdom glitches. I beat the game so I needed to update it to transfer my other saves to that Switch. It hasn't worked since that update.
i have this issue it connects works for a quick bit then disconnect then connect the disconnect and stay disconnected
@@SneakerFanaticTelevision Here’s an update from CRKD, they just replied to my support ticket. I think this part is the key point:
------
Issue 3: My Nitro Deck's LED lights up but is totally unresponsive with my switch.
Possible Solution: If the Nitro Deck's LED is functioning but it doesn't respond when connected to your switch, follow these steps:
1. Ensure that the "Pro Wired Controller" option is enabled in your switch settings.
2. Check that there are no Joy-Cons or other controllers connected to your switch.
3. Try connecting the Nitro Deck to another switch (if available).
4. Try connecting a pro-controller via the USB-C port on the bottom of your Switch (if possible).
If the Nitro Deck still doesn't work on the second switch, it's likely a fault with the Nitro Deck itself. In this case, please return it for a replacement under warranty.
*If the Nitro Deck works fine on the second switch, the issue may be with the data line in the USB-C port of you switch.* Such faults can sometimes go unnoticed, especially if you primarily use handheld mode with Joy-Cons or connect via Bluetooth with a controller. Even if the power and video output via USB-C seem fine, the data line could be damaged or worn.
------
Yeah actually I think it’s the data line that is having issues. My ROG Cetra RGB, which uses the USB-C port, doesn’t work with the OLED Switch most of the time just like the Nitro Deck. However it does work fine with the V1 Switch I own. It makes me wonder why the data line is so fragile on the OLED model. I mean the V1 Switch was here since the month Switch launched, and for some reason it does better on this part than the OLED. Seriously what did Nintendo do with the OLED Switch? Now my plan is to sell my current OLED and get another one from the secondhand market.
@@riocheng0205 same for me with both Nitro deck and Nexigo Gripcon 2, both start working but after 3 minutes do not. At the end do you solve your issue with repairing for a new usb c port on the switch oled?
I fixed the problem by doing a hard reset on my switch. Hold the power button, till power options pop up then turn it off completely then turn it back on.
Works fine with mine got the snes edition when when it first came out works fine and got the hellboy edition and works fine iono why I keep hearing this about the OLED not working
Anyone having an issue where thumbsticks stop working? Crkd button blinks 6 times purple.
I thought it was only me
hey man any updates?
Not for me. Some ppl have drop things that worked for them. Nothing has worked for me yet.
Did you update the firmware on your nitro deck?
@@timothybailey655 how can I update my nitro decks firmware? I have the same issue…
Did you ever solve this?
No I haven't
That's a shame, just got mine today and got this exact issue hence how I ended up here. Found a few others and a few Reddit posts too having identical issues. Did it ever work for you on that OLED? Sorry if you said and I have missed it but mine worked for maybe 45 seconds when configured initially and now just light up but doesn't respond. Everything else about the port is fine though as did all the tests and checked it etc.
@bigmeanbunnyuk no, it still does not work.
Do a hard reset on swirch hold power button
I even bought 2 nitro decks
My splatoon oled has no problems
That's the one I'm using, not working 😢
full restart helps sometime
That’s strange I don’t have this problem and I have an oled
que mal y yo la acabo d pedír por Amazon, ojalá no me venga con fallos
como te llego bro? si funciono cual version pediste? fue en oled?
@@nevermiind3778 si bro me llegó en perfectas condiciones y jugar con ese diseño está a otro nivel me encanta, tengo la versión oled
Unpaid the joycon first , scan the bar code and refer to the instructions
Please navigate to HOME > System Settings > Controllers and Sensors > Then turn on "Pro Controller Wired Communication".
This worked 😄😄😄
I have the white OLED and it works just fine with the Nitro deck. Not sure what your issue is
Lucky
Yes I have the white oled as well have no issues with either of my ND’s got the hellboy edition recently and nothing wrong just like my SNES edition when it first came out.
It’s your usb port dude either it’s dirty or jus doesn’t work that’s how the nitro deck connects not the rails it’s not the product or the railing it’s your switch!😊
I'll upload the full video soon. Because right before this, it was working lol.
thanks ill check that out for mines
** SOLUTION ** : Ensure that the "Pro Wired Controller" option is enabled in your switch settings.
The fact it works with the other switches and just that one says to me it's an issue with the USB port on that one switch.
I have two oleds and neither has this issue. It's also the first I've seen of it and even for you it's only happening to this one? Definitely sounds like a port issue.