Car Settings Memory Saver - ODBII
HTML-код
- Опубликовано: 13 сен 2024
- Don't you hate it when you change your battery, or disconnect your 12v car battery to do some car repairs, only to lose all your settings? Well, here is a battery saver for you to use. This is one that hooks up to your cars ODBII reader. However, it needs another 12 power outlet to support it, so another device is required. Does it work? Check out the video now!
If you would like to purchase this adapter, you can find one like it here
Amazon - amzn.to/2T0zHfa
Disclaimer
I assume no liability for property or vehicular damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with any and all tools, including but not limited to electrical tools, power tools, pneumatic tools, any lifting apparatus, including jacks, jack stands, and automotive lifts, manual tools, chemicals, lubricants, and any other instruments used within the video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of all above mentioned tools or equipment, or any other items mentioned above, and all information contained in this video is the sole responsibility of the user and not myself or Nexus Auto. Caution is advised and any practices by the viewer is at user discretion. Any tool or part recommendations or links are given for informational purposes only and it should be assumed to be bought at your own risk. I or Nexus Auto assumes no liability for any damages, premature part failures, or incorrect parts made from purchases made online, including but not limited to tools, parts, instruments, jacks, chemicals, lubricants, etc.
Helpful information I have the one with goals and the computer plug with a 9-volt does that one work I know you showed the one for the 9 volt battery for the cigarette lighter I'm wondering if the 9 volt one works for the computer plug what is underneath the dash
There is 9v ODB II adapters out there, so it should work. But I haven't tried one yet
You are a great teacher, job very well done, thanks so much, now I don't have to reset the radio stations, hooray!!
Thank you, very much appreciated. Glad the video had some great info.
Thanks a lot bro. This was very helpful.👍👍
No problem. Glad to hear!
I have a Gooloo portable jump starter and comes with cigarette lighter accessory but the manual says the cigarette lighter output is 15V/10A. Will that be ok?
Hi. That is a good question. So that Gooloo Portable jump starter...did you want to use the cigarette lighter output to jump start the vehicle? Or does it have the ability to just maintain the battery?
Do they make one that hooks up to OBD and a 9V???
they are rare, but they are out there. Here is one from Amazon Canada as an example
www.amazon.ca/Connector-Battery-Memory-Keeper-Saver/dp/B07KCN69LJ
Another thing you can do is just hook your battery charger up to the battery terminals, remove them from the posts and replace the battery. it will keep the memory because the Battery charger supplied constant power to the car. (some people may not have the knowledge and skill to do this, so the OBD memory is the safest option. )
Absolutely! That is a very good point. No disagreement there.