4K | COL D'IZOARD - 2021 YAMAHA MT 07 - TITANIUM AKRAPOVIC
HTML-код
- Опубликовано: 8 сен 2024
- Heading up the famous Col d'Izoard starting from the Briançon side. Roads are unfamiliar so I take it easy.
Filmed on a GoPro Hero 9 with chesty + foam case to reduce wind noise
PolarPro 16ND filter
1/96 shutter - SV 4k 24fps - Hypersmooth on
Enjoy!
![Run Away - Tzuyu(TWICE) ツウィ 쯔위 [Music Bank] | KBS WORLD TV 240906](http://i.ytimg.com/vi/KnHNNyAYiu0/mqdefault.jpg)
Great scenery, and love the sound of that akra!
Glad you like it!
Do you have a link to the rear-view mirrors at the end of the handlebars ?
Hi! They're Highsider Victory Evo's.
www.nr1motor.nl/highsider-spiegel-stuureind-victory-evo.html
What side mirrors do you use? I love it ;]
They're Highsider Victory Evo's! Cheers!
Akrapovic best !
Nice 🥇
Thanks 🔥
that's the euro 5 line + db ??
This is euro 5 with no cat and modified db killer.
Is it the akrapovic with the cata and the db killer removed?
Cat has been removed, but db killer is modded.
@@krollmt09sp Isnt it illegal to remove the cat? or is that just here in Norway?
@@asfalts1137 illegal here in Belgium as well. Police do not really check it though.
Is it only in the US that we remove the baffle/DB killer? I noticed Europeans don’t usually do that.
@@bradbugado4814 I have it done also on my MT-07 Storm Fluo No Baffle Grtz from the Netherlands
Akrapovic titanium euro 4 ?
Yup euro 4!
Was it hard to remove DB killer?
Hi! Not really. Will post a vid on how I did it soon.
@@krollmt09sp please do! Did you remove anything from the fronr filter ?
Yep! I removed both the front pipes and cut a hole in the back pipes. From an angle it looks like there is no db killer. Also removed the kat convertor.
@@krollmt09sp ok plz make video I have 2021 mt 07 also and I want to remove it. 🙏😍 Its so quiet now 😞
@@Charmarque drill the spot weld and rip it out with some multi-grips took me a fair while to get it out but we’ll worth it sounds amazing if you have the carbon tip as I did there are 3 screws you need to take off to get to the spot weld 😉
Why do you hear such noises when driving up gear? This cannot be listened to !!!! If you have gas to the limit, it is a little better, but yes, it's a misunderstanding :)
Working on a better recording setup. Thanks for your feedback!