Sharpening Carving Tools with the Flexcut SlipStrop
HTML-код
- Опубликовано: 25 авг 2024
- For maintaining inside and outside of gouges and vee tools, the Flexcut SlipStrop consists of a complex moulding with two areas of leather and a bar of a specially developed honing compound (abrasive). In use, the particular part of the moulding most suited to the chosen tool is rubbed crayon-like with compound and the tool stropped. A mirror finish is achieved quickly, and the resulting razor edge can be maintained by repeating the process many times before resharpening is required. Use for gouges and vee tools both inside and outside.
• Flexcut SlipStrop at Jackson's: www.jacksonsar...
great tutorial, I feel comfortable attempting this just by watching the video because it was explained thoroughly here in great detail
This made so much more sense than the written instructions! Thank you so much!!!!😫
Thankyou for taking the time to do this. It is very helpful to a newbie like me who only uses a pen or pencil.
Thanks for the info, it will help a lot. I just picked up whittling, and I'm always looking for more info on how to carve and to maintain the tools. Thanks again!!!
Thanks for the demonstration on sharpening Flexcut tools! Very well done and very informative.
A delightfully concise tutorial. Thanks!
The biggest issue I had was what was the abrasive size of the compound since it never gets mentioned. I strop with a 1 and .5 micron diamond paste on my planes and chisels. So I sent Flexcut an email and their customer service guy called me on Friday Morning. He said the abrasive particle size in the Gold Compound is .6 microns and the entire bar is non-toxic. I may try using it on my planes and chisels since the Gold Compound is way less expensive than what I've been using.
Exactly what I needed. Thanks for the explanation and demonstrations!
That’s what I am doing wrong. Good job flexcut. Instructor, thank you for doing this.
best video about this tool!
Thank you for the lesson. I was worried about messing up my new chisels.
Warm up the Slipstrop a little and the compound will load easier. About the same temp as your cup of coffee.....NO, don't dunk it! LOL
helpful tutorial, thank you
thanks guys, just bought one of these
Hope you find it useful Stephen!
Thank you so much, the tutorial was excellent, you kept it clear and simple. I greatly appreciate you sharing your knowledge! :-)
How do you clean the strop when it gets full of metal (turns black)?
Thank you, very well done .
Say Heah, Infact I just put together a nice carving set. I got a Spyderco Puukku for Xmas, Santa had to make another stop. He than brought me the Flexcut Carving Jack. It was a no brainer to combine the two together. I now have a nice carving kit for my trips into the Bush, easy carry too. Dilly Dilly.,,.p
Good job - very helpful - what set of gouges would you recommend for making art block print carvings?
So should the compound be used on both sides? Or only on the flat one?
I just got the flexcut beginners set and the gouges or V tool won't fit or work in it. Why don't they make it universal for all the tools instead of finding out that only the straight edge knives will work on it?
approximately how much pressure?
How much pressure do you have? Your not going to break the tool in your hand. If the tool handle breaks, send it back to the manufacturer. North American tool manufacturers should never, ever break between the handle and the bit. Ever!
is the slip strop made out of wood ?
I have some Pfeil tools and assume it’s the same principal 🤷♂️ I did see a someone use a stone first the finish off with slipstrop. What is the advantage or disadvantages of using a stone?
Good afternoon Simon, thank you for your question.
The slipstrop is more of a buffer that will maintain sharp tools and just do the final touches of a proper sharpen. You could use a high grade (4000) slipstone for the same purposes as the slipstrop, however the slipstrop is easier to use. In short, you'd probably need to start with a stone if your cutting tool is really blunt, but if it just needs a little sharpen you can just go in with a high grade slipstone or the slipstrop. Little and often buffering is better practice than a big sharpening operation, less frequently.
We hope this helps, all the best,
the Jackson's team.
I Appreciate the response , thank you 🙏 😊
anyone know what "grit" that yellow honing compound is...? 1000? 2000?
rahm emmanuel According to Flexcut the particle size is .6 micron and slightly larger. Looking at the Grand Unified Grit Chart that looks like it would be somewhere under 18000 grit. 😮
Honing compound is always 15000-25000 grit
Say Heah, Is the same applicable to the Flexcut Carving Jack ? Oh by the way, is it true the Flexcut Steel is 1095, I like 1095. Dilly Dilly (I stole the Dilly Dilly from a Budweiser commercial).,,.p
Zhal ke bule kam ke kya paise
good afternoon,what grit is the gold compound please?
Grit? If it is any stronger than 2000 I’ll eat my work glove.
Warning the Flexcut SlipStrop now only comes with a 1 inch strip of leather on the back now it is not covered like your's is and is so small it's useless! You should check it out before you recommend this to your viewers.
I just bought one 20 minutes ago and it is just like the one in the video
The one I bought from Amazon last week looks like the one in the video....
...