Very nice video, love the stippling. And as far as the cut trigger guard, all that matters is that the customer likes it and it's with in your own ability. Excellent work!
All this grinding and melting definitely lowers the tensile strength of the frame, I've had several frames crack and Glock will not guarantee the weapon when is tampered with.
MannyScoots they’ll replace the frame with a brand new one for a crisp $100 bill every day of the week... and not to mention I’ve stippled dozens if not hundreds that are out there doing there job better than they were from factory so....🤷🏼♂️
Thanks man! I don’t really know. I looked into several machines over the years, but I’ve honestly been so busy lately with Cerakote and stippling that I haven’t had time to really think about it.
I get curious sometimes and look these things up to find what works best but look at torchmate it’s around $25k for the full system but it is definitely directed towards gunsmiths.
@@tylers8195 I can’t remember the price tag on it but I looked into a haus 5 axis machine which would be great for gun stuff but you could literally make about anything with it lol
Freaking awesome. Crisp and clean. What tools you using bud? Pyro pen and that red rotary pen with the vacuum? I could use that, would help with the dust and fumes I'd reckon. Thanks man, great video.
dmbmikee I appreciate it! The rotary tool is actually a micro air die grinder. I wish that were a vacuum on the end but it’s just the exhaust for the air tool. The stippling tool is a wood burning tool. I can’t remember which brand it is but their available all over the place. If you ever figure out a way to help with the dust and fumes let me know! Lol
There has to be a lot of flex in that trigger guard now. The support hand relief cut was cut entirely to deep for my liking. Other than that great job.
Evil Opti Z It could have definitely been cut a little more shallow but then it loses a lot of its effectiveness. It’s just a hard cut to make on the pocket glocks. Thanks for the feedback I appreciate it.
love the work you do man! I have a glock 26 gen 4 and p320 x carry I may send to you for some of the amazing&beautiful frame work if that's cool&if you have time man. if so you can shoot me an email and ill give you contact info that way..don't do social media lol thanks Corey..keep up the fantastic work👍
I like your stippling but much like everyone else the trigger guard was not good. If it because the gun is too small then be the professional who knows better like a tattoo artist that knows it just want work out and advise against it. Some of your other work on trigger guards looks great and the cross was a nice addition or distraction. In the end I your Buddy was happy then that’s what counts right. I might get with you soon on a few stipple projects.
He is gonna be pissed that is very poor job keep practicing check out some of the good ones that due that like frank castle he would fix that for you for about 150
Stippling looks GREAT !! Trigger guard....not so much.
i agree with eman stippling looks great but pretty sketchy trigger gaurd way too thin and not even
Nice work glocks are new to me i got one and bought 4 more including the 35 long slide 40 im way happy thanks for the vid
Very nice video, love the stippling. And as far as the cut trigger guard, all that matters is that the customer likes it and it's with in your own ability. Excellent work!
ELK Motorsports thanks man. I appreciate this comment. Most people that leave comments lack in the logic department.
You destroyed that trigger guard bro, way too thin. Wtf
Ray Delfa it may look a little thin for your liking but you gotta remember this is a very small pistol.
All this grinding and melting definitely lowers the tensile strength of the frame, I've had several frames crack and Glock will not guarantee the weapon when is tampered with.
MannyScoots they’ll replace the frame with a brand new one for a crisp $100 bill every day of the week... and not to mention I’ve stippled dozens if not hundreds that are out there doing there job better than they were from factory so....🤷🏼♂️
Nice work. What milling machine do you plan to buy for slides?
Thanks man! I don’t really know. I looked into several machines over the years, but I’ve honestly been so busy lately with Cerakote and stippling that I haven’t had time to really think about it.
I get curious sometimes and look these things up to find what works best but look at torchmate it’s around $25k for the full system but it is definitely directed towards gunsmiths.
@@tylers8195 I can’t remember the price tag on it but I looked into a haus 5 axis machine which would be great for gun stuff but you could literally make about anything with it lol
Hopefully you arnt charging for that undercut couse its just to thin you whent to far with the double cut thats way to thin
Praise yah ... love it 👏👏👏👏🤟
What do you use to get the undercut to be shiny?
Work your way through the sand paper grits course to fine. Then I hit it with a silicone (green) cylinder then cotton cylinder. That’s how I do it now
Man that came out great!!
Thanks man!
Did you do any guns for JTs in Pikeville?
Tony Smith Jr. no sir I don’t think I did.
I bet that man of God said Holy Shit you ruined my Glock lol
At least the trigger guard. I wouldn't pay for that job
Hahahah I can’t believe I just now read this comment.. he was satisfied. I agree it wasn’t my best triggger guard but that’s been years ago now.
Price on doing a 43 just like that
Freaking awesome. Crisp and clean. What tools you using bud? Pyro pen and that red rotary pen with the vacuum? I could use that, would help with the dust and fumes I'd reckon. Thanks man, great video.
dmbmikee I appreciate it! The rotary tool is actually a micro air die grinder. I wish that were a vacuum on the end but it’s just the exhaust for the air tool. The stippling tool is a wood burning tool. I can’t remember which brand it is but their available all over the place. If you ever figure out a way to help with the dust and fumes let me know! Lol
DO YOU THINK THE SIG V CROWN 147 WILL BE GREAT IN THE 43 FOR EDC AND WHY
There has to be a lot of flex in that trigger guard now. The support hand relief cut was cut entirely to deep for my liking. Other than that great job.
Evil Opti Z It could have definitely been cut a little more shallow but then it loses a lot of its effectiveness. It’s just a hard cut to make on the pocket glocks. Thanks for the feedback I appreciate it.
love the work you do man! I have a glock 26 gen 4 and p320 x carry I may send to you for some of the amazing&beautiful frame work if that's cool&if you have time man. if so you can shoot me an email and ill give you contact info that way..don't do social media lol
thanks Corey..keep up the fantastic work👍
futurepatrolman23@yahoo.com is my work and email I use for contacts and etc.
Can I send you a polymer 80? I want you to do some work on a few lowers if you can do serialized lowers
Daniel Mccoy yeh I can do that as long as it has a serial number on it. I just can’t touch a finished frame without a serial number
You can send me a message on Facebook or Instagram or I am send my phone number if you need more info
Good work
Thanks!
Damn you took WAY too much on that undercut
You butchered the bottom of the trigger guard! 😮
do any work on semi auto shotguns?
That song Fear sure fits the situation in 2021 but Fear not & be of good cheer for JESUS CHRIST is LORD . JESUS CHRIST MATTERS. Great job 👍.
Amen brother!
I like your stippling but much like everyone else the trigger guard was not good. If it because the gun is too small then be the professional who knows better like a tattoo artist that knows it just want work out and advise against it. Some of your other work on trigger guards looks great and the cross was a nice addition or distraction. In the end I your Buddy was happy then that’s what counts right. I might get with you soon on a few stipple projects.
Proudtobe1 American thanks for the feedback! I’ll be glad to serve you
That trigger guard looks like it's ruined the gun,stippling looks great. Even if it's not ruined the guard looks like shit.
msgt1942 I will admit I made the guard on that gun thinner than it needed to be but that was also years ago lol
He is gonna be pissed that is very poor job keep practicing check out some of the good ones that due that like frank castle he would fix that for you for about 150
Great job...AMEN BROTHER!!!
That is the worst double undercut I've seen id be embarrassed putting that on you tube .
Awesome!
Qué ganas de arruinar una pistola 🤦🏿♂️