89€ and people want it to work as if it cost 5000€ The internet is so hilarious!!! :D The lathe is excellent!!!!!! For 89€... They want to buy a bike expecting to ride a Ferrari and still say thank you for warning me not to buy the bike. Because I wanted to ride at 200km/h. Internet, the world's best free comedy show!
My friend I don't use a lathe, but you can see in the video that the table moves! It should be a safer bench. On the right side of the lathe the nut is completely loosened, and it is obvious that you should have tightened the nut, you don't need a lathe to know that. Then people see it shaking all over the place and think it's the lathe's fault...
Thanks for the video, if it wasn't for people like you sharing stuff you wouldn't know what you are buying. You probably deserve a medal for getting a bowl off that thing. I was thinking about one for just pen turning. But I don't think that I will bother. Thanks for the video though.
Thanks the video I definitely will not be buying one of these things now doesn't appear powerful enough I'm having trouble believing it will turn a pen blank safely.
it actually works,just be aware of tool limitations,it’s starter machine for smaller projects,i made loads of tool handles,small bowls,spin tops etc,aluminum base should be secured and tools sharp, well if it gets you,then it’s down the rabbit hole,as with every hobby,bigger lathe,better chisels ,more chisels,more chucks ….🤣🤣🤣
The machine can do the job just don't be hurry take your time and use sharp tools for the motor is not stoped. Maybe I will buy one to do mallet and beer mug
Very poor technique, improper tool use, big blank and blunt tools . . . there’s nothing wrong with the lathe, but it is a cheap hobby machine and you are expecting too much from it.
I think it's the worst lathe ever seen on the web. None of the DIY I've seen till now is so useless. You're a very brave man on keep using it! Nice job despite the bad tool...
Oh my god man, this machine isn't rubbish I have this ať home and work so great ...the dumb in this video in opening use slow rotating so this make it this horryble noise ...
@@michalgranacka2934 I agree. I don't have one yet, but I know Parkside and they produce great tools (bosch). I don't know why he didn't balance the block first before detailing. It looks pretty good to me for what I expect is a very reasonable price.
Der Trabbi unter den Drechselbänken. DDR Bürger in den 70/80gern, hätten sich sicherlich gefreut über so was. Aber, jetzt, Boh ey, ist das schlecht! Dann lieber das Hobby wechseln und statt Drechseln Briefmarken sammeln. Die Albern sind auch nicht so teuer wie Drechselwerkzeuge. Es wird mir schlecht beim zusehen.
I'm pretty sure that thing has no belt. It's direct drive and the motor is way underpowered for the job. Maybe the wood is too hard/wet, but that shouldn't make such a difference. Thanks for the video! I was just about to drop the hammer on one
All the Negative Comments,unyet you manage to make some nice projects with your lathe,i believe they are smart little lathes made for small projects,like beads & fishing floats & yoyo,s & stuff. Thank you for Sharing.
What a lot of snobbery from some people on here. It is a beginners lathe. Try it and see if you take to wood turning and then if the answer is yes, you can upgrade to a better piece of equipment. Or maybe go out and spend £2k upwards and find out turning is not for you. I certainly know which route I would suggest.
Salve, mi Hanno da poco regalato un tornio Einhell TC WW 1000/ , non so che mandrino acquistare, si possono fare delle ciotole anche usando solo il piattello con le viti. Magari hai un mandrino da consigliarmi. Grazie
En plus de la machine qui rame a mort, les outils n'ont pas l'aire bien affuté. Sans parler de leur utilisation. Il faut bien commencer par un bout, mais la il fait ce faire aider.
4 года назад+2
Le matériel forcement, pour l'utilisateur je le trouve courageux. ( Ou inconscient!)
Pour du matériel débutant ça peux faire le taff mais pour l'utilisateur il faut passer par la case apprentissage ....il y a des dizaines de vidéo pr débuté le tournage...et aiguisé ces instruments
@@WoodWorkingbg I think that the best solutions is find a used lathe like this and than change the engine with a bigger one. Good things: -It's very bigger than the 50/60 euro mini lathe on ebay so voi can work big diameters -it costs one half oh an einhell Negative things: Everything else
ruclips.net/video/57aaydVxsTY/видео.html If you look in the description of this video, there is a link to one you can purchase. Bear in mind the adaptor is in Imperial not Metric, so it's slightly loose to begin with, but once you tighten it down and attach the chuck it's fine.
I wouldn't call it a toy. With all those things flexing, I think it's unsafe to use it. A toy is not supposed to be unsafe. I'd call it a waste of materials.
Yes the motor is quite weak and often stops, the chisels are not blunt but of poor quality material. The chisel I work on the video costs as much as a lathe parkside.
hi all.I bought it for 44 euro brand new to learn to turn wood. I believe it can be use for smaller things,bowls hopefully.actually the very first day the tool resting handle broke (its look very weak aluminium) ,but i made new one from iron.will see ...but what u can get for 44 euro anyway.....
Hola. Quisiera saber donde puedo adquirir esas gubias. Yo tengo un torno Parkside pero con las gubias que trae no puedo hacer nada parecido a lo tuyo. Gracias
That looks absolutely rubbish. The motor is constantly slowing with the slightest resistance. Definitely worth avoiding thx for sharing.
89€ and people want it to work as if it cost 5000€ The internet is so hilarious!!! :D
The lathe is excellent!!!!!! For 89€... They want to buy a bike expecting to ride a Ferrari and still say thank you for warning me not to buy the bike. Because I wanted to ride at 200km/h. Internet, the world's best free comedy show!
My friend I don't use a lathe, but you can see in the video that the table moves! It should be a safer bench. On the right side of the lathe the nut is completely loosened, and it is obvious that you should have tightened the nut, you don't need a lathe to know that. Then people see it shaking all over the place and think it's the lathe's fault...
Bring the stock to even radial shape before cutting any further to eliminate disbalance and vibration
Thanks for the video, if it wasn't for people like you sharing stuff you wouldn't know what you are buying. You probably deserve a medal for getting a bowl off that thing. I was thinking about one for just pen turning. But I don't think that I will bother. Thanks for the video though.
Thanks the video I definitely will not be buying one of these things now doesn't appear powerful enough I'm having trouble believing it will turn a pen blank safely.
That is definitely the worst parkside machine i've ever seen. But respect ...you got a bowl
Looks like a death trap 😕
it actually works,just be aware of tool limitations,it’s starter machine for smaller projects,i made loads of tool handles,small bowls,spin tops etc,aluminum base should be secured and tools sharp, well if it gets you,then it’s down the rabbit hole,as with every hobby,bigger lathe,better chisels ,more chisels,more chucks ….🤣🤣🤣
Plastic on an aluminum bed... my GOD look at that tool rest flex. 😖
The machine can do the job just don't be hurry take your time and use sharp tools for the motor is not stoped. Maybe I will buy one to do mallet and beer mug
Very poor technique, improper tool use, big blank and blunt tools . . . there’s nothing wrong with the lathe, but it is a cheap hobby machine and you are expecting too much from it.
Maybe for small items or just to see if your interested in the hobby..tnks for sharing
I think it would be perfect for kids in learning how woodturning works.
I think it's the worst lathe ever seen on the web. None of the DIY I've seen till now is so useless. You're a very brave man on keep using it! Nice job despite the bad tool...
You are absolutely right!:)
Oh my god man, this machine isn't rubbish I have this ať home and work so great ...the dumb in this video in opening use slow rotating so this make it this horryble noise ...
@@michalgranacka2934 At 1.14 I am sure you must have noticed the locknut on the tailstock begins to spin ?.
@@michalgranacka2934 I agree. I don't have one yet, but I know Parkside and they produce great tools (bosch). I don't know why he didn't balance the block first before detailing. It looks pretty good to me for what I expect is a very reasonable price.
Its ok for sound effects.
That is the sorriest excuse for a lathe I have ever heard of. Watching it makes me wanna puke.
Nice bowl, Not sure about the lathe, seems terrible. Underpowered and made of plastic and aluminum.
Der Trabbi unter den Drechselbänken. DDR Bürger in den 70/80gern, hätten sich sicherlich gefreut über so was. Aber, jetzt, Boh ey, ist das schlecht! Dann lieber das Hobby wechseln und statt Drechseln Briefmarken sammeln. Die Albern sind auch nicht so teuer wie Drechselwerkzeuge. Es wird mir schlecht beim zusehen.
thanks for this video. I have almoust made a mistake of ordering it.
From lego technic?? 🤦♂️
Dont insult lego! Haha
truc de fou jamais de la vie j’achète cette machine bravo a l'utilisateur de nous avoir fait une démo
The reason the motor is slowing is because if you dig into the wood the belt slows down 👍
I'm pretty sure that thing has no belt. It's direct drive and the motor is way underpowered for the job. Maybe the wood is too hard/wet, but that shouldn't make such a difference. Thanks for the video! I was just about to drop the hammer on one
Katastrofa!
Katastrofa to dłuta jakie ma
@@michanadolny3246 ta tokarka jest do drobnych elementów a dłuta jak śrubokręt!
All the Negative Comments,unyet you manage to make some nice projects with your lathe,i believe they are smart little lathes made for small projects,like beads & fishing floats & yoyo,s & stuff. Thank you for Sharing.
It's not a bad little lathe for 70quid..
@@jigsey. I i have a larger vintage lathe for bowl work. i bought one of these for making small cups.
Man, that thing is a hunk of junk. All my years turning, never seen one that bad. SMH
Einhell TC WW 1000
Sheppach DM 1000T
MSW WL1010
An many more for almost same price is 1000 times better than this one
What a lot of snobbery from some people on here. It is a beginners lathe. Try it and see if you take to wood turning and then if the answer is yes, you can upgrade to a better piece of equipment. Or maybe go out and spend £2k upwards and find out turning is not for you. I certainly know which route I would suggest.
The machine sure is suffering a lot
Some of the digging was done with the chisel upside down, was it on purpose or by mistake?
Salve, mi Hanno da poco regalato un tornio Einhell TC WW 1000/ , non so che mandrino acquistare, si possono fare delle ciotole anche usando solo il piattello con le viti. Magari hai un mandrino da consigliarmi.
Grazie
Holly shit.. you sir saved my money and surely few fingers. Thanks a lot!
Ik vraag mij af of die draaibank wel vast is gezet....ik zou als LIDL zijnde deze beuners van YOU TUBE halen,,
Prices at shops: Lidl Germany - 89,99 Eur, Lidl Lithuania - 99 Eur. More: pricer.lt/en/p/constructions-repair/electric-tools/parkside-pdm-600-a1-woodturning-lathe-tekinimo-stakles-550w/9621246
Questa macchina non vale 1 euro
je trouve idiot de travailler avec de super gouges sur un "tour à bois" aussi merdique.......
Good job!!! What diameter does the trunk have? and how much of a piece does that lathe accept?
Очень маломощный, там 500W нету
😂🤦🏼♂️
Mon dieu! Quelle souffrance de voir un tel spectacle.
C'est quoi le pire ? Le matériel ou l'utilisateur 😅?
En plus de la machine qui rame a mort, les outils n'ont pas l'aire bien affuté. Sans parler de leur utilisation. Il faut bien commencer par un bout, mais la il fait ce faire aider.
Le matériel forcement, pour l'utilisateur je le trouve courageux. ( Ou inconscient!)
Pour du matériel débutant ça peux faire le taff mais pour l'utilisateur il faut passer par la case apprentissage ....il y a des dizaines de vidéo pr débuté le tournage...et aiguisé ces instruments
Great video - now I don't need/want to buy one
Would it be useful for bigger things?
Ma il motore si ferma sotto sforzo. È una baracca.
The best option for that yoke would be a disc sander because it ain't no lathe.....
Me da la impresión de ser poco estable y segura para trabajos de esta envergadura, incluso peligrosa.
So ein Rotz. Weggeschmissenes Geld. Da hole ich mir lieber eine von Holzmann.
The lathe it s having the engine too weak...or it s only for the small things...
Vale mas la gubia que el torno, es un peligro, y no va a durar mucho con ese tipo de trabajo, es para cosas mas pequeñas, saludos.....
I hope that it cost no more than 30 euro
90 euro in Bulgaria
@@WoodWorkingbg I think that the best solutions is find a used lathe like this and than change the engine with a bigger one.
Good things:
-It's very bigger than the 50/60 euro mini lathe on ebay so voi can work big diameters
-it costs one half oh an einhell
Negative things:
Everything else
Zabawka dla dzieci strach na tym robic
lascia perdere che rischi di farti male. tornio parkside e una porcata
Le tourneur merite la médaille du courage car utiliser une bécane aussi merdique c'est pas gagné.
balancealo primero que como se escape te va a descalabrar
WTF has happened to german engineering looks like this was subbed out to lego
chinese crap sold by german multi, nothing more
is it possible to find a jaw chuk for this lathe? i have a similar model of lathe from parkside
ruclips.net/video/57aaydVxsTY/видео.html
If you look in the description of this video, there is a link to one you can purchase.
Bear in mind the adaptor is in Imperial not Metric, so it's slightly loose to begin with, but once you tighten it down and attach the chuck it's fine.
Big like!👍👍👍👍👍✅💪Felicitări!
Quelle cochonnerie ce jouet!
bon ben pourun petit cadeaux de noel c,est pas mal non ?
Und das nennt sich drechseln ? Grauenhaft.
Thanks for the effort but that's no lathe. Just a toy
Yep :)
I wouldn't call it a toy. With all those things flexing, I think it's unsafe to use it. A toy is not supposed to be unsafe. I'd call it a waste of materials.
Too loooong.
Mickey Mouse 🧩
It is hell machine.
pico to je vergl
Horrible !!!!!!!!!!!!!!
Hilarious .Love it! Those movies make me smile a lot ..😂 Thanks for sharing!
Das ist doch eine Qual
Il est nul ton tour a bois
Au secours.....
le moteur tient t'il encore le coup?????
This motor doesnt seem to have much power, also are your turning chisels blunt too ?
Yes the motor is quite weak and often stops, the chisels are not blunt but of poor quality material. The chisel I work on the video costs as much as a lathe parkside.
Yes i have many parkside tools, but i don't like this lathe, maybe because i also have an axminster.
Ma che porcheria e ? 🤣🤣🤣🤣🤣🤣🤣🤣
Porcheria dei ladroni krukki!
OMG
hi all.I bought it for 44 euro brand new to learn to turn wood. I believe it can be use for smaller things,bowls hopefully.actually the very first day the tool resting handle broke (its look very weak aluminium) ,but i made new one from iron.will see ...but what u can get for 44 euro anyway.....
You are persevering then. I’d have sent it back after the first video hahahahahahah!
I'm thinking about it
Yeah , goodluck returning this to LIDL used . Even open package is void , and even then you'll need to prove that there is a defect of some sort .
@@skan8 Openning package isn't void, you also dont need to say anything about a defect. aslong as you say you didn't like it should be enough
@@skan8 lidl have a fantastic returns policy... If you have the receipt you can return it...
Try doing that at Axminster or toolstation
🎄⭐👍
O Boy ..... This is a mixer not a lathe 👎🏻
You are absolutely right
🤣😂😂😂
Hola. Quisiera saber donde puedo adquirir esas gubias. Yo tengo un torno Parkside pero con las gubias que trae no puedo hacer nada parecido a lo tuyo. Gracias