No turning vane in the tee on the plenum box. No duct seal on the joints or insulation. Must be exposed or conditioned space. They dovetailed the 90's instead of using a boot tap.
Sean Vandyke when it's done properly you don't need to can tape it the two companies I work for never used one one roll of 10 tape this other company I work for they loved it cuz I didn't know how to install how to install
Taping or painting it with duct sealer is very good, we do it in all jobs in the Commercial Industry along with Insulating it the cost an time is well worth it in the long time
@Robert Slackware Are you on Hydroxychloroquine? Any Cold or Hot Air that gets into your basement means you are spending money! Meaning Gas or Electricity. So much for Energy Efficiency.
@Robert Slackware I am guessing you live in the Southern USA. Here in Canada Cold Air, well with the exception of a Cold Air return, is a BAD thing. The same thing can be said about your "Main Trunk" Air is leaking out...therefore the Efficiency of your HVAC goes down. IT is blowing heat where it is not needed. Please don't give that crap about Heat Rises!
@@tombrown1227 Also that isn't true, you will have some air leaks no matter how tight the metal work. Also it is CODE nearly every state all joints must be sealed with tape or mastic and efficiently test via blower doors are done.
Install looks neat but so many issues with it. No volume control, no turning vanes, duct looks really cheap and flimsy, no sealant. And why dont you believe in mez frame connections?
They should have sealed all connections with mastic or tape, loose a large amount of air in those joints. Loose a ton of your efficiency with all those unsealed connections
Great video! Learn more about how furnaces and air conditioners work together to keep you comfortable by watching our latest video: ruclips.net/video/51TMyb3zbEo/видео.html
I’m sure they sealed and insulated the duct afterward. They just wanted to show of the sheet metal job. This is how systems used to be installed in the 60’s. My father was a contractor, and the heating systems were are rectangular trunk lines with round and square take offs where necessary. I don’t remember seeing any mastic or insulation back then, but the ductwork looked just like this. Anyone who uses flex for an entire system is not a pro, just a amateur HACK
True craftsmanship in the old days in sheet metal work. Awed by the skills of the old timers with all the compound reducing tees and ells. Not to mention no flex. All rigid.
Listen, I've been in the heating and cooling industry for the better part of twenty plus years. One of the biggest pieces of advice I can offer to other professional contractors is to leave a massive dump in a 90° bend. There is no better way to assert your dominance.
My friend is a retired home builder who used to build large custom homes. He told me that one of his customers had just moved into their new home and was complaining about odors in the second floor bedrooms. He went up into the attic and searched for the source of the odor. He was expecting to find a dead animal but he found that one of his construction crew had taken a huge dump in the attic insulation.
Nothing is sealed or insulated. Conditioned space or not, how can you make a video about efficiency and not seal and insulate the ductwork? Crazy man...... Very clean work though!!!
@@zack9912000 no keep your OPINION to yourself. that's not how condensation damage works. Air inside duct is NOT moist. Duct tape and or mastic at joints/seams prevents any air loss,.
@@j.walker3498 You clearly don't work in our industry, it is CODE all ductwork connections must be sealed with foil tape or mastic to prevent air loss and blower door tests are required on new construction, spray foam over ductwork in some states is illegal.. See it all the time were ductwork is not sealed and or insulatated as code requires. It either must insulated inside or it must be wrapped. See it alot, causing condensation to run off the ductwork and mold to grow. Buthers try to use Spray foam on ductwork which in most states can't be used to Insulate ductwork period. Beside there is plenty of moisture in the air flowing in your ductwork that will cause mold growth from improperly sealed ductwork where it can escape spray foam or not. Doesn't take a high percentage of moisture in the air supply to cause mold problems. Hence it is a billion dollar a year industry using dry ice to remove mold from roof sheeting because of leaking ductwork Also how tight the ductwork sits there is zero chance in hell they are getting 100% of all that ductwork covered.
@Robert Slackware - Ah I see. I was planning on installing an HVAC system in our future house, that is why I was researching about all of this. Thank you for the info.
Nope these are the type of butchers in New construction we clean up after. No sealed or insulatated ductwork for starters. Would never pass inspection.
Gosh. Don’t even mention Architects, structural engineers, mechanical engineers. These are professionals. They represent you. These other guys are salesmen who may not have your interests in mind. Tradesmen and manufacturer’s representatives are NOT professionals.
you probably dont give a shit but if you guys are bored like me atm you can watch pretty much all of the latest series on instaflixxer. Have been streaming with my brother for the last few days :)
We were accommodating with range placement, but we used trailer flex to offset the cost of the extra piece of wall stack.
No turning vane in the tee on the plenum box. No duct seal on the joints or insulation. Must be exposed or conditioned space. They dovetailed the 90's instead of using a boot tap.
I always enjoy your informative videos and appreciate the effort put into producing them.
Beautiful install
Thanks for the video on your company
Not a single thing is sealed or insulated?
Sean Vandyke when it's done properly you don't need to can tape it the two companies I work for never used one one roll of 10 tape this other company I work for they loved it cuz I didn't know how to install how to install
Taping or painting it with duct sealer is very good, we do it in all jobs in the Commercial Industry along with Insulating it the cost an time is well worth it in the long time
@Robert Slackware Are you on Hydroxychloroquine? Any Cold or Hot Air that gets into your basement means you are spending money! Meaning Gas or Electricity. So much for Energy Efficiency.
@Robert Slackware I am guessing you live in the Southern USA. Here in Canada Cold Air, well with the exception of a Cold Air return, is a BAD thing. The same thing can be said about your "Main Trunk" Air is leaking out...therefore the Efficiency of your HVAC goes down. IT is blowing heat where it is not needed. Please don't give that crap about Heat Rises!
@@tombrown1227 Also that isn't true, you will have some air leaks no matter how tight the metal work. Also it is CODE nearly every state all joints must be sealed with tape or mastic and efficiently test via blower doors are done.
Install looks neat but so many issues with it. No volume control, no turning vanes, duct looks really cheap and flimsy, no sealant. And why dont you believe in mez frame connections?
They should have sealed all connections with mastic or tape, loose a large amount of air in those joints. Loose a ton of your efficiency with all those unsealed connections
That supply plenum is going to sweat like a banshee in cooling mode!!!! I don't care if it's conditioned space or not!!!!
So true. The supply plenum should be insulated.
Great video! Learn more about how furnaces and air conditioners work together to keep you comfortable by watching our latest video: ruclips.net/video/51TMyb3zbEo/видео.html
They forgot to insulate the suction line
As a side note. Mine was insulated..they just didn't plug up the 8" Hole they left!
why are these videos not HD?
I’m sure they sealed and insulated the duct afterward. They just wanted to show of the sheet metal job. This is how systems used to be installed in the 60’s. My father was a contractor, and the heating systems were are rectangular trunk lines with round and square take offs where necessary. I don’t remember seeing any mastic or insulation back then, but the ductwork looked just like this. Anyone who uses flex for an entire system is not a pro, just a amateur HACK
True craftsmanship in the old days in sheet metal work. Awed by the skills of the old timers with all the compound reducing tees and ells. Not to mention no flex. All rigid.
I doubt it I think one of their workers commented on another of my post saying spray foam was used which isn't code.
Is there a way to fix bent ductwork when already installed? Some other workers used it to support themselves when doing other work.
Flex on the Hood Vent ? Should be 26 ga. hard pipe.
yes & you are great
@@hvacductfebricatingguide8420 Just saying,that would not pass in Cleveland.
neither would the rest of the job. The duct an panning MUST be buttered !
Wow. You guys do some clean work 👌🏻
Listen, I've been in the heating and cooling industry for the better part of twenty plus years. One of the biggest pieces of advice I can offer to other professional contractors is to leave a massive dump in a 90° bend. There is no better way to assert your dominance.
My friend is a retired home builder who used to build large custom homes. He told me that one of his customers had just moved into their new home and was complaining about odors in the second floor bedrooms. He went up into the attic and searched for the source of the odor. He was expecting to find a dead animal but he found that one of his construction crew had taken a huge dump in the attic insulation.
Small dick energy bro. Assert your dominance through passion and flawless work. Not shitting.
I noticed two things right off the bat that He did wrong no canvas no volume dampers
Sir I am air conditioner duct fitter you have vacancy tell me please
Nothing is sealed or insulated. Conditioned space or not, how can you make a video about efficiency and not seal and insulate the ductwork? Crazy man...... Very clean work though!!!
spray foam.
@@j.walker3498 Doesn't prevent air loss in the ductwork and exposes the spray foam to moist air that will allow mold growth
@@zack9912000 no keep your OPINION to yourself. that's not how condensation damage works. Air inside duct is NOT moist. Duct tape and or mastic at joints/seams prevents any air loss,.
@@j.walker3498 You clearly don't work in our industry, it is CODE all ductwork connections must be sealed with foil tape or mastic to prevent air loss and blower door tests are required on new construction, spray foam over ductwork in some states is illegal.. See it all the time were ductwork is not sealed and or insulatated as code requires.
It either must insulated inside or it must be wrapped. See it alot, causing condensation to run off the ductwork and mold to grow. Buthers try to use Spray foam on ductwork which in most states can't be used to Insulate ductwork period. Beside there is plenty of moisture in the air flowing in your ductwork that will cause mold growth from improperly sealed ductwork where it can escape spray foam or not. Doesn't take a high percentage of moisture in the air supply to cause mold problems.
Hence it is a billion dollar a year industry using dry ice to remove mold from roof sheeting because of leaking ductwork Also how tight the ductwork sits there is zero chance in hell they are getting 100% of all that ductwork covered.
@@zack9912000 Thats exactly what i said. i only have 4 years installing. but have been a super the last 10.
Where’s the oil dip stick go ?
Rounded ducts are more efficient, why are all these rectangular?
The main ducts on the supply and exhaust are rectangular for correct volume and static pressure while the side duct runs are round.
@Robert Slackware - No, you are right, I was just learning at the time.
@Robert Slackware - Ah I see. I was planning on installing an HVAC system in our future house, that is why I was researching about all of this. Thank you for the info.
Very nice
So can one run a HRV or a ERV on a Separate system
The HRV or ERV is a separate system that conditions the fresh air with exhaust air from bathroom, kitchen, and dryer.
Insulation on ducting. .? Final?
Nope these are the type of butchers in New construction we clean up after. No sealed or insulatated ductwork for starters. Would never pass inspection.
If the thermostat has a dead battery, it also won't turn our equipment on and off.
Not always true some stays run strictly off common from the air handler
Stats
I didn't think panning joist spaces was allowed anymore
Ray Tinsman in the Focus on Energy it's required depending on what stage of Focus on energy
Some places still allow it. Energy star would never allow it
@@jasontimmons2642 In Cleveland its still allowed. I mostly hard-duct all returns. If i do use a joist-bay, i duct seal the shit out of it.
Oh i like this video
The video had nothing on cooling.
No drain pan. Well thats a ruined floor down road. Thx
Freddy Feutz
Why would you need a drain pan...it's in the basement with a floor drain a foot away. Dumb!
Tomasz Kowal you are right my friend. A pan is a default for me. Didnt see floor drain. Sorry
Freddy Feutz
All good lol
Whose gonna finish a mechanical room
Nothing to show how to install
Greg Logsdon thanks for saving me time
Nice
They did not wear gloves?
A lot of sheet metal guys don't, scary
Gosh. Don’t even mention Architects, structural engineers, mechanical engineers. These are professionals. They represent you. These other guys are salesmen who may not have your interests in mind. Tradesmen and manufacturer’s representatives are NOT professionals.
I'll safe 400 500 yearly..... but wait i have to do maintenance yearly and costs 500 🤣😂
No P-trap and no pan come on now
you probably dont give a shit but if you guys are bored like me atm you can watch pretty much all of the latest series on instaflixxer. Have been streaming with my brother for the last few days :)
@Gage Rhys Yea, have been using InstaFlixxer for since november myself :)
Hanging only five feet at a time with two people? My boss would loose it
Your boss a dickhead then I will only hang with a helper unless it's my own job
🇮🇳Round ducting square ducting Mangal das
Stoneage ducts.
Stone Age= the right way. What would you use, Flex?
Just blah-blah-blah.....
Too much talking not enough showing
the end user...lolz code for your getting dorked
Would never pass code here with what they didn't do.
Lmfao.....larry hacker hahahahahaha hvac specialist hehehehe
Dx
talk about a hack job lmao
Ha, good luck with all that in the real world.
Would never pass code