Ironman 4x4 Raid Rear Bumper Suited For 5th Gen Toyota 4Runner | Install Guide
HTML-код
- Опубликовано: 23 июл 2024
- Step-by-step how-to guide for installing the Ironman 4x4 Raid rear bumper on your 2010+ Toyota 4Runner. We show you lots of tips and tricks to make this install super easy to do at home.
Get your Ironman 4x4 4Runner Raid Rear Bumper here - ironman4x4america.com/raid-se...
Here's a list of recommended tools for this install:
- Body clip removal tool
- Flat head screwdriver
- #2 phillips head screwdriver
- Socket wrench
- Metric Sockets: 10, 12, 13, 16, 17, 18, 19
- Metric Combination wrenches: 10, 13, 16, 18
- Metric allen wrenches: 4, 5, 6
- Jig Saw, Oscillating multi-tool, Airsaw, something for cutting bumper plastic, etc...
- 12v wiring tools and supplies
- Multi-meter
The cut template can be found on the product page under the INSTALLATION tab here: ironman4x4america.com/raid-se...
For additional installation support or if you have any questions please reach out to our customer service team. ironman4x4america.com/
Chapter Selection:
0:00 Intro
0:46 Dropping the spare tire
1:25 Removing the rear mudflaps and bumper shell
4:20 Parts overview
5:02 Blind Spot Monitors
5:30 Removing more rear bits
7:20 Installing chassis brackets
9:35 Installing rear recovery points
10:28 Installing bumper corner braces
12:02 Installing bumper shell
13:04 Setting up the cutting template
14:13 Trimming the bumper plastic
17:43 Installing cut bumper plastic
18:22 Installing rear LED lights
19:54 Installing bumper top plate
21:46 Installing mud flaps
23:56 Wiring LED lights
24:43 Conclusion
Visit our site for more cool stuff: ironman4x4america.com/
Follow us on Social Media!
Instagram: @ironman4x4america
Facebook: / ironman4x4usa 
Авто/Мото
![5th Gen 4Runner Hi-Lite Dual Swingout Rear Bumper Install [With Accessories]](/img/1.gif)
Thanks so much for putting the install video together. This video is Exactly what I need for the installation of the rear bumper. Can't wait for my bumpers and rails to ship to transform my 4Runner. It's going to be Ironman front to back and underneath. Big shout out to Tinkerer's Adventure for his great reviews of your products, it was key in selecting your suspension over all the competitors.
Been waiting for this. I got the Raid Rear Bumper For my 5th Gen Toyota 4Runner around Aug 2022. however, decided to wait for the install video. Thank you very much.
Thank you for your patience and for your business! Enjoy!
Wow, Ironman has some good engineers. That bumper is what I was looking for and looks easy to install. And it doesn't look like it heavy.
Personally I think the blind spot monitoring system can still be utilized if you switch the side brackets, place them higher to bolt in bottom two bolts, and zip tie in sensors. May have to make connection wire longer, but I think it's doable as to keep the blind spot monitoring system.
Looks awesome
Thank you!
Hey man, is that my Tundra?! Hahaha
I spy my Raid bumper on the front! So funny.
I have achieved internet fame.
I see Victory 4x4 makes a relocation bracket for the BSM. Can i just remove the sensors on my 2021 TRD ORP and not have the truck freak out?
Can I fit a hitch tire carrier like the ultraswing ?
Very nice raid bumper. Great install video. Sure wish I could get a bumper like that for my 2nd Gen Nissan Frontier. Just hoping...
Unfortunately, due to low demand, we do not offer a rear bumper for the 2nd gen Frontier. We are working on the 3rd gen Frontier so stay tuned there.
@@Ironman4x4America What about a front bumper??
@@mikemorgan4670 For the 3rd gen yes. Nothing for the 2nd gen on the road map now. All Nissan efforts are for the 3rd Gen and building that out.
@@Ironman4x4America While I can appreciate your approach of capitalizing on a new model the fact remains that the 2nd Gen Frontier had a 16 year run. That puts alot of vehicles on the road that are now now in the hands of second and third owners who are probably most likely to modify a vehicle and actually take it off road. That is a captive market, standing in the shadow of Toyota and Jeep, yet almost completely un catered to. You cite lack of demand but you can capture that market by only offering a few items to it. Marketing and product development should be looking at this in my humble opinion.
@@mikemorgan4670 Understandable, but we can't be everything to everyone and have to prioritize our small teams efforts. We have to look at the data of the number of trucks sold against the number of owners that are modifying them to justify the effort invested in product development. Overseas we have full kit for the D40 Navara, NP300, etc... Unfortunately Nissan made the US Frontier different enough to the Navara that only the suspension is the same with the global vehicle. Because we are an Australian brand the effort was put into the global Navara where the numbers of sold trucks made sense compared to the small number of US trucks. We ran into the same issue with the Ford Ranger, but even worse. So we have to be thorough and efficient with our resources when it comes to product development. The good news is there are some great small US businesses that do cater to the 2nd gen Frontier and we should support them whenever possible, especially when there are few options. Hope this makes sense.
Thank you! Can the truck be jacked with a hilift from this bumper? Like from the tube
Yes you can.
Did you say you lose your blind spot sensors?
Make for GX470 pweeese.
Do you put the spare tire supports back?
Where is the template? Mine didn’t have one
My kit is missing the pvc washers, where can I get those?
Here is a link to the product page. Under the installation tab, there is a link to download the cut template. ironman4x4america.com/raid-series-rear-bumper-kit-suited-for-2010-toyota-4runner/
You asked 3 questions and got 1 answer. So typical on the internet I see this all the time. Is it diminished digital capacity from texting too much or some un-spoke rule to only ask one question at a time? I was wondering about the spare supports also.
Where are you located. Do you do installs? I have a 2020 trd pro. I don't have the time to do this?
All of our info can be found on our website. ironman4x4america.com/
where can I get the template for 4runner sr5? my bumper came without one .
Here is a link to the product page. Under the installation tab, there is a link to download the cut template. ironman4x4america.com/raid-series-rear-bumper-kit-suited-for-2010-toyota-4runner/
Thank you !!!!
You guys gonna make this for the GX460?
No plans at this time.
Anyone has any luck finding the cut template?
Here is a link to the product page. Under the installation tab, there is a link to download the cut template. ironman4x4america.com/raid-series-rear-bumper-kit-suited-for-2010-toyota-4runner/
looks like there is a pretty big gap around the "eyebrow" pieces I guess its for body flex?
How does it look in person? Oh no 2 questions! Can they both be answered? Stay tuned to find out.
What's the bumpers weight?
Specs are on the product page. ironman4x4america.com/raid-rear-bumper-kit-suited-for-2010-toyota-4runner/
Nice! Made in USA?
Our bumper manufacturing facility is located in Thailand, which makes it easier for global distribution.
Damn, I was super excited and was like yes finally, the bumper I’ve been waiting for has finally been made. And then you disabled blind spot monitoring. Nope! Why take away a feature you use 90% of the time for something which you’ll need hardly ever except to add aesthetics. Crazy!
I wanted to buy this so bad. Bummer.
Lol, you can't siphon gas out of the filler neck. It's easier just to drill a hole in the plastic gas tank....
Aren't ironman products manufactured in China?
As a global brand, our products are made all over the world depending on the market served. Many of our products are manufactured in our Thailand factories but some are made in the USA, Australia, South Africa, China, and Central America.
lol you will loose a $3,000 feature (BSM) for this $1,000 bumper how does that make sense.... dumb
Do they make a front hitch receiver for a 2023 4RUNNER?
We do not have a front bumper receiver for the 4Runner.