Excellent. Maybe rather than a bar. What abou a ratchet. Yours is easy to use. Treetopsider is an interesting gentleman also. 😊. Take care my God bless you
è semplice dal costo delle parti per costruire questo non eccessivo è ottima spiegazione.Complimenti per tutto questo impegno!! Grazie per avere postato questo video è molto fatto bene soprattutto istruttivo. Williams
Not a bad concept but I would have some kind of locking ratchet to secure winding and unwinding handle. If that ever got away from you like it almost did when the whole unit tipped a little yikes😬
your design will line up for that particular diameter case but what if the case is smaller or larger? then it will no longer line up height wise. the shaft will either be below or above your key.
Yes, you are right about the line up to different size barrels. I've been using it for quite awhile now, the solution is to fabricate different height of the lower piece of the barrel holder.
Hi Impian Tan, it's a homemade model as commercial mainspring winder is not available in my country. The letdown keys, sleeves can be sourced from the Internet and the other necessary parts from local hardware store. The wooden body you got to fabricate it by yourself.
Nice build and demonstration.
Great idea! your design is now open for improvement, thanks for the start.
Excellent. Maybe rather than a bar. What abou a ratchet. Yours is easy to use. Treetopsider is an interesting gentleman also. 😊. Take care my God bless you
Nice job! Plenty of torque with a 1/2 inch drive.
Excellent job well done
è semplice dal costo delle parti per costruire questo non eccessivo è ottima spiegazione.Complimenti per tutto questo impegno!! Grazie per avere postato questo video è molto fatto bene soprattutto istruttivo. Williams
Thanks for the great video, helps a lot.
brilliant. thanks.
Not a bad concept but I would have some kind of locking ratchet to secure winding and unwinding handle. If that ever got away from you like it almost did when the whole unit tipped a little yikes😬
Yep...a ratchet wrench handle would do it!!! C-clamp the winder to the table and the table would stop the handle in either direction!!😁
hi! can you tell me the size of the box you insert the letdown key chuck in?
your design will line up for that particular diameter case but what if the case is smaller or larger? then it will no longer line up height wise. the shaft will either be below or above your key.
Yes, you are right about the line up to different size barrels. I've been using it for quite awhile now, the solution is to fabricate different height of the lower piece of the barrel holder.
Sopar🙄
Hi, basic and purposeful,are you a dealer in this line? Wish to get some items if possible. Thanks.
Hi Impian Tan, it's a homemade model as commercial mainspring winder is not available in my country. The letdown keys, sleeves can be sourced from the Internet and the other necessary parts from local hardware store. The wooden body you got to fabricate it by yourself.
Hey i need you to build my clock
Write me
Thank.you
Your device for springs included in this video ruclips.net/video/6JJJ0mO6dn0/видео.html