Это видео недоступно.
Сожалеем об этом.
NX-INSTINCT Mod Chip Installation on Customer's OLED Switch
HTML-код
- Опубликовано: 14 авг 2024
- NX-INSTINCT Mod Chip Installation on Customer's OLED Switch
Visit us online at:
Wayayeo.org
Like and subscribe if you like this video. EDUCATIONAL PURPOSES ONLY
You did a great job. I'm satisfied. Thanks!
Your technique is gifted
nice work on the soldering but the fit and finish could use some work. your cuts with the pliers are messy and leave jagged edges and you also can make the shield fit perfectly if you just smooth over the globs of solder from the anchor points on the flex cables so they're flush.
I have an interesting mod I'd like to see if you can do. I have a PS Vita 1000 and would love to have it modded with a USB-C port I have on hand made for it. Would you be able to do that?
I really like all your work, a lot of knowledge
Great job!!!! Thanks for the video !
Hola cual chip es mejor el NX-Instinct o el otro
What kind of wire did u
Hi, i need help for my OLED. I got error code ** RST not connected. I checked with multimeter and didn’t get any reading even when i put directly on the RST point. Is there any other RST point that i can solder?
Muy vídeo. Pero sabrás cómo puedo instarlo a Switch 1.0?
What size wire are you using? Nice work.
36-38 awg wire works
Does v6s chip need to reflash it?
What did you use to scrape the clk point looked way easy
SMD Tweezers or a relly thin needle.
What sizes of cables did you use? For all those points I would like to know.
1 more follower
38 awg
I installed hwfly with oled v6 kit but the console starts only in stock mode and the chip led is white The strange thing is having 450 on all points and 382 on B Those are a bit low…
Have you ran into black screen but constant green pulsing to purple to red flash then off
I have a similar issue with my V6 and it's usually my C point on the chip
What microscope are you using? Looks great, I'd like one for myself
I’ve tried a few. I recommend the one at the link below. This is what I’m using atm
a.aliexpress.com/_mr8MFpO
Your very talented just need to work on your camera skills
Thanks for the tip
No need to flash like picofly?
I damaged the soldering point on DAT0 Can it be traced ?
Does it have to be .75
I tried contacting you guys thru your website no one has even answered back
What size wire did you use for points B and C
Currently using 38 awg.
@@Wayayeo thank you I figured it out and I was able to install the mod chip successfully
How has Big N not taken down these videos?
It’s technically not illegal to mod your own system. He’s not promoting piracy. I also don’t condone piracy. Support the devs of projects you like. That being said, shut one down , another 10 will show up.
Maybe they have financial interest in these videos .
A noob can be impressed with the install will be easy.
And in fact just break his switch by not using the right tools . Leading to buy another switch 😈
did you even clean the flux off?
Yeah that's so odd. They also didn't put new paste on the CPU before they put the shield on...
Can u do mines
Use my site wayayeo.org
picofly rule
picofly bad too many issues with OLED