Our Patreon contributors get their names on the shop wall or in the end credits! IF YOU ENJOY THE SHOW PLEASE CONTRIBUTE! :))) 😋 👉 Patreon.com/soundman
I watch these usually in my office (headphones) among several other office people. This one had me running away from everything because I simply could not contain my silent-but-violent laughter! The box looks positively badass Doug!
Hey Russell, please leave me your thoughts? Well it’s been a long road, how about an acrylic window installed in a bed cover so you can keep that box protected from the weather. Then fold it back when you want to show off “the goods”. That’s not your sack either Doug! Or even better, CNC a cardboard cutout of the fine little person dancing that was so much your inspiration for this box build. Display him with the box in the back of your truck he deserves it. (31x)
Russell Francis Jr. I’ll refer to my later comment can you please stop going under the acronym “Russell” we all know your really Rafa’s mom 😐 god damn I solved another one ........... another one ☝️
The window completes it. Looks just like the headlight in your 12’th gen f-150. I really need to move to a nicer climate so i can have something like this. So clean 👍
I know people give you shit about every little thing but I must say your attention to detail is one of the main reasons I watch your videos. Congrats on the box it looks bad ass !!!
A hydro dip or "herc fede" style swirl dip on your basket with phosphorous paints would turn this midget disco into a midget ACID disco. I would test out phosphorous paint alone, phosphorus paints with glow in the dark designs, and phosphorous paints with a glow in the dark layer on top to see what looks the best. I hope your disco ball helps make your etch stand out more because right now its just not poppin' enough. Also there is more than just green glow, there is blue purple and pink as well. No matter what you end up doing this is some real epic wizard shit and I cant wait to see it finished up!
Imagine BOTH W7’s in the F150 with a new BILLION DOLLAR 6th ORDER BAND PASS...epic I tell ya! But you did a great job with this box Doug. Awesome work!
Doug, I think that your design on the box is great, and you really went the extra mile with all the details. Thanks for all the great video's,, nice work sir.,,
optimum placement of the strip on the window would be to have the ends in a corner, that way you can overlap just a bit, its easier to hide that way also its a little easier to install/remove the window too.
Is that the sub that got dropped through the display case at the old shop? And, when you bedline the truck, be sure to leave the factory drains open up near the cab. Don't want the box to sit in a puddle under it. Awesome episode!!!!
I've been following this build, and the box looks great. One thing though. Why isn't the angle of the window on the right side at 90 degrees? The logo was a great idea, but it throws the look off in that spot since the angles don't match.
Don't pay any mind to those people that want to give you crap for taking so long on your projects Doug. Anybody that takes a look can see by the quality of your work that you are an extreme perfectionist! Not trying to stroke your cack, I just wanted to State the obvious because some people don't seem to be paying attention.
Man DOUG!!!! Your TOO good. I respect the HELL out of your craft. You're a man of precision and class and I can respect that. You say dumb 8th grade jokes but DAAAAAAMN I love dumb 8th grade jokes.
one of your better episodes in a while! i mean, let's not forget that they are all legendary, but this one was like legendary+! i love your editing and in my opinion, you consistently win at youtube. glad you got those remaining tool marks out of the window lip and i was hoping you'd forget the red sub and try something different. now, i know this thing is damn near indestructible and definitely worth showing off, but i was thinking why not make a dust cover or something for it? you've already shown us your upholstery skills, so whipping up something to protect it that could easily be yanked off would be a good idea, no?
Dude. first of all, you had me at Volkswagen… secondly, this coold be a knitting channel and Id be bout it bout it. I am in no way qualified to do so, But I heeby name, you and your channel, ‘the best there ever was, is and will always be, ya heard!?’ (It’s a prestigious award)
Box looks great. I like the way it turned out. Just curious but what is the high and low end tuned to? I could care less about overall spl just curious about the range of the box. I love the idea of the large port area and while I’m not a w7 fanboi, I do love me some w7 lol Thanks man, keep fighting the good fight
You should use that clear xpel automotive protection on the window to prevent any surface scratches. All the hard work I would be pissed when it got the first scratch.
i am 35. last system i had was 7 years ago. my friend of same age who used to help me build custom box's told me i am too old to be building a system. I Just bought a car with an upgraded 280amp alternator and i have two 18" 's sitting in my room i see noting wrong with car audio at any age. HI FI 4 LIFE! debating on a bit tune processor starting to plan the build.
i spend 1hr a day during the week driving but i work 3rd shift and like high spl to stay awake and keep deer away from car. i also love rock music and like my system loud. and Doug inspires me to build something nice!
Doug you really should make a chrome plate to cover the inside of your tailgate so you can see that beautiful box in your rear view mirror, get lost as you gaze at its glory, forgetting to look at the road, veer of and slam through a railing on an over pass, f150 hits the concrete below, gas line cracks, sparks from the crash ignite the fumes........maybe on second thought you should not do that. Just get rid of your rear view mirror all together. For God sakes Doug you only make 2 videos a week I can't deal with no show at all. It would look pretty cool though. Keep your eyes on the road!
I knew there was no way it would be fully done. but... u r right. the red is not mdisco style. got that ct sounds shape window. I know, I know... but if u put this template with that template... should have just 3d printed a Tline box and called it quits. The box is awesome man. every hour spent does show.
Damn Doug!!! Your editing skills are killing it these days,😂😂😂!!! I laughed a ton at this episode. You might consider a dvd release series kinda thing. I would buy every season.
Doug I have a theory I think you should know about ..... Russell is actually Rafas mom !!! She’s figured out how to use the RUclipss and now she stalking you like a lion watching a gazelle **que the nuke explosion**
I like it when it looks better the second time around. This is the same reason I drive my workers crazy when I tell them that it doesn’t look good enough and then I redo it and they still look at me weird but I know it’s right.
Nice videos man, took a long time on that box but ya did it again 🤣. You ever have any issues with alternator feedback on those f150's using an loc and stock radio?? I have a 2011 5.0 f150 and can't get rid of this annoying rumble in the subs when the truck is running.. I'm using the lc7i
Great work, Doug!! Your hard work paid off with a nice box. Can't believe you're slapping it on the bed and leaving it exposed to the elements! Side note, I am a day late with this episode due to constipation but I squeezed out some turds tonight cos I'm talking to my girlfriend again.... if I owned a SoundmanCA cap I would wear it with swagger
WHAT UP SOUNDMAN in the future u gonna build universal tablet mounts, or make some for the kindle made out of MDF, cheap material for cheap tablet lol let me know
Love your content bro! Awesome humor, epic roasts, blast mode with moma jokes, and quality work being done!!! Ps: miss the mule videos, when you bringing her back out???
Best video yet, great job on the box. The way you have that atomic bomb with music in the background instead of the explosion is fucking priceless. Keep up the good work, and funny commentary.
Ey soundman lol love the video but i have a ? If i have a box tuned to 30hz and the port is say 10Wx10Hx10D.. and i re calculate it to 20Wx5Hx5D at 30hz will it still sound the same as the first port?
Hope you don't take this the wrong way Doug, you a cool guy, hard worker and have some awesome Ideas but, I would have tried a few other positions for the logo that spot just doesn't look right there. Should have put it on the box and left the window clear or centered it better IDK. Not saying I could have done a better job but the logo just doesn't fit. O an Best of luck with the new addition to the family!!
After you listed the things you need to do before box goes back in....all I could think of is the "2 years later" from Spongebob...Russell was right..lol
nice work man! what are the names on your wall? I've been wondering for a long time
Pierce McGrath Patreon supporters
Our Patreon contributors get their names on the shop wall or in the end credits! IF YOU ENJOY THE SHOW PLEASE CONTRIBUTE! :))) 😋 👉 Patreon.com/soundman
wham bam - DONE
Pierce McGrath, Welcome to the club.
My name is not in the credits...😔
That smoke weed everyday was fucking epic! 😂🤣😂😆🤣😂😆🤣😂😆
YOUNG FLY MEXICAN NETWORK! 💨💨💨👍Smoke WEED every day
I watch these usually in my office (headphones) among several other office people. This one had me running away from everything because I simply could not contain my silent-but-violent laughter! The box looks positively badass Doug!
JC Fitch I did the exact same thing.
Hey Russell, please leave me your thoughts? Well it’s been a long road, how about an acrylic window installed in a bed cover so you can keep that box protected from the weather. Then fold it back when you want to show off “the goods”. That’s not your sack either Doug! Or even better, CNC a cardboard cutout of the fine little person dancing that was so much your inspiration for this box build. Display him with the box in the back of your truck he deserves it. (31x)
Russell Francis Jr. I’ll refer to my later comment can you please stop going under the acronym “Russell” we all know your really Rafa’s mom 😐 god damn I solved another one ........... another one ☝️
Haha haha comments today almost as entertaining as dougs banter!
Russell Francis Jr. Is that avatar Micah Ansley from AAMP of America?
fadetoblack73
Handsome guy, but no.
Wow the $8000.00 Sub Box is finally done!!! Will miracles never cease.....Now rip it all apart again
8000.00 wait, thats just the CNC window! total box must be at least 25k :@)
Next...... in 2 months.....the sub install
ha ha ha ha!!!!
The window completes it. Looks just like the headlight in your 12’th gen f-150. I really need to move to a nicer climate so i can have something like this. So clean 👍
I know people give you shit about every little thing but I must say your attention to detail is one of the main reasons I watch your videos. Congrats on the box it looks bad ass !!!
This is honestly the best produced episode of amplified ever
A hydro dip or "herc fede" style swirl dip on your basket with phosphorous paints would turn this midget disco into a midget ACID disco. I would test out phosphorous paint alone, phosphorus paints with glow in the dark designs, and phosphorous paints with a glow in the dark layer on top to see what looks the best. I hope your disco ball helps make your etch stand out more because right now its just not poppin' enough. Also there is more than just green glow, there is blue purple and pink as well. No matter what you end up doing this is some real epic wizard shit and I cant wait to see it finished up!
Your attention to detail and craftsmanship is impeccable.
It's beautiful Doug! Looks like a grand piano. Artistic both visually and aurally. You're a master in your field son!
I hope he paints the basket white to match the ports. Great Video Doug!
Imagine BOTH W7’s in the F150 with a new BILLION DOLLAR 6th ORDER BAND PASS...epic I tell ya! But you did a great job with this box Doug. Awesome work!
Doug, I think that your design on the box is great, and you really went the extra mile with all the details. Thanks for all the great video's,, nice work sir.,,
optimum placement of the strip on the window would be to have the ends in a corner, that way you can overlap just a bit, its easier to hide that way also its a little easier to install/remove the window too.
the box looks awesome , thanks for showing us exactly how to do so many different upgrades.
Hey Doug You should try Plexus to keep the Acrylic looking good. I Use it on my Wind screens for my Bike and helmet.
11:33 thru 11:56 was outstanding- Made up for years of subpar content - Thanks
Box is lookin dope Doug ! Cant wait to see it back in the truck.
Is that the sub that got dropped through the display case at the old shop? And, when you bedline the truck, be sure to leave the factory drains open up near the cab. Don't want the box to sit in a puddle under it. Awesome episode!!!!
I've been following this build, and the box looks great. One thing though. Why isn't the angle of the window on the right side at 90 degrees? The logo was a great idea, but it throws the look off in that spot since the angles don't match.
Don't pay any mind to those people that want to give you crap for taking so long on your projects Doug. Anybody that takes a look can see by the quality of your work that you are an extreme perfectionist! Not trying to stroke your cack, I just wanted to State the obvious because some people don't seem to be paying attention.
watch that port alignment when you bedline the truck! might have to modify the sliders to compensate.
Looks really good. Clean! Is the basket aluminum? Would look sweet polished out to a mirror finish.
Man DOUG!!!! Your TOO good. I respect the HELL out of your craft. You're a man of precision and class and I can respect that. You say dumb 8th grade jokes but DAAAAAAMN I love dumb 8th grade jokes.
Box is absolutely bad ass now that its done! Can’t wait to see it with the new sub
one of your better episodes in a while! i mean, let's not forget that they are all legendary, but this one was like legendary+! i love your editing and in my opinion, you consistently win at youtube. glad you got those remaining tool marks out of the window lip and i was hoping you'd forget the red sub and try something different. now, i know this thing is damn near indestructible and definitely worth showing off, but i was thinking why not make a dust cover or something for it? you've already shown us your upholstery skills, so whipping up something to protect it that could easily be yanked off would be a good idea, no?
Doug you should bedline that clear window, really seal things up for the box
Well that ports not coming out again...
Loving the box. But another 5 episodes of a sub being built? Get on with it man. The suspense!
Hey Doug, you should do dome sub test with yhat box. Try all different kinds and give a review.
At this point, you should keep this piece of art at home....Great job as always...well done!
Dude. first of all, you had me at Volkswagen… secondly, this coold be a knitting channel and Id be bout it bout it. I am in no way qualified to do so, But I heeby name, you and your channel, ‘the best there ever was, is and will always be, ya heard!?’ (It’s a prestigious award)
Should be done in time for SEMA in October need to have that awesomeness on display
Doug...That box is legit!! Awesome job man!!
Periwinkle!! Paint the basket Periwinkle!! It's so choice. 👌 😍
Saddle ranch! LMAO
I'd like to see the cork gaskets painted black though
Box looks sooooooo good. So worth the wait.
THANK YOU!! :))
U gotta call me Doug. It's Rob at big johns
You should paint the inner lip of the window, the same color as inside the box to hide gasket, and blend with the interior.
It's done? Bullshit Doug, you know damn well you're going to find a way to spend another month on this thing.
Box looks great. I like the way it turned out. Just curious but what is the high and low end tuned to? I could care less about overall spl just curious about the range of the box. I love the idea of the large port area and while I’m not a w7 fanboi, I do love me some w7 lol
Thanks man, keep fighting the good fight
You should use that clear xpel automotive protection on the window to prevent any surface scratches. All the hard work I would be pissed when it got the first scratch.
i am 35. last system i had was 7 years ago. my friend of same age who used to help me build custom box's told me i am too old to be building a system. I Just bought a car with an upgraded 280amp alternator and i have two 18" 's sitting in my room i see noting wrong with car audio at any age. HI FI 4 LIFE! debating on a bit tune processor starting to plan the build.
Marc Mathes
I spend 2-3 hrs a day driving. So a SPL/Q system keeps me happy. Daily driver with a focal system...
i spend 1hr a day during the week driving but i work 3rd shift and like high spl to stay awake and keep deer away from car. i also love rock music and like my system loud. and Doug inspires me to build something nice!
One is never too old for car audio, and building speakers.
One, however, does get too old to have loud exhaust on a daily driver.
36 and still banging air.... I'll be 72 and still banging air lol
Im 52 and still bangin...
Doug you really should make a chrome plate to cover the inside of your tailgate so you can see that beautiful box in your rear view mirror, get lost as you gaze at its glory, forgetting to look at the road, veer of and slam through a railing on an over pass, f150 hits the concrete below, gas line cracks, sparks from the crash ignite the fumes........maybe on second thought you should not do that. Just get rid of your rear view mirror all together. For God sakes Doug you only make 2 videos a week I can't deal with no show at all. It would look pretty cool though. Keep your eyes on the road!
I knew there was no way it would be fully done. but... u r right. the red is not mdisco style. got that ct sounds shape window. I know, I know... but if u put this template with that template... should have just 3d printed a Tline box and called it quits. The box is awesome man. every hour spent does show.
May have already been asked and answered.. But what are doing for cab to bed twist? So it doesn't twist up the ports..
Keep the vids coming. Hey, show some customer installs where you work your majic
Damn Doug!!! Your editing skills are killing it these days,😂😂😂!!! I laughed a ton at this episode. You might consider a dvd release series kinda thing. I would buy every season.
Doug I have a theory I think you should know about ..... Russell is actually Rafas mom !!! She’s figured out how to use the RUclipss and now she stalking you like a lion watching a gazelle **que the nuke explosion**
Finally its done! You said it yourself. Time to build a woofer.
Then after this build, you can put some more work into your VW
Box assembly part 556, Final Assembly part 1...but who's counting!? 😉😁👍
I like it when it looks better the second time around. This is the same reason I drive my workers crazy when I tell them that it doesn’t look good enough and then I redo it and they still look at me weird but I know it’s right.
Hey nice box!!! Said no one ever to Rafa’s mom.....But I need more episodes per week Doug, c’mon man !!
Nice videos man, took a long time on that box but ya did it again 🤣. You ever have any issues with alternator feedback on those f150's using an loc and stock radio?? I have a 2011 5.0 f150 and can't get rid of this annoying rumble in the subs when the truck is running.. I'm using the lc7i
That looks epic. Can't wait to see it installed
Retro music vibes always on point 👍
Damn it Doug! When you gonna rip it in the Mule again? We need some fresh scenes of the Mule. Perhaps even a burnout or three?!?!
Doug you should get the dancing little person to help you with unveiling this monster of a sub box
Final assembly on the box *BUT* there's a hundred more things to do to the truck before I actually install it. Stay tuned 😉
Daupe!!! Doug, you stop shaving until the F-150's totally done so that you can be Santa Clause with a true beard for Christmas 🎄
Looks pretty sweet. But what did you do the other two days?
Did you use t-nuts for the screws for the acrylic window?
EPIC1 Funny ass split screens and dance scenes !
Nice work Doug! The box is gonna twist! hehe jk... Keep up the great work!❤️
I will forever commemorate this day in history!
New sub here, hands down by far the funniest car audio channel on RUclips bro 😂
Great work, Doug!! Your hard work paid off with a nice box. Can't believe you're slapping it on the bed and leaving it exposed to the elements! Side note, I am a day late with this episode due to constipation but I squeezed out some turds tonight cos I'm talking to my girlfriend again.... if I owned a SoundmanCA cap I would wear it with swagger
Nice work Doug. Impressive build.
I lol at least 10 to 20 times per video!!! I get the struggle and the humor behind it!!
You should line up the break in the wire to the corner of the window. So it’s not super noticeable.
You should put a clear film on the window to help resist scratches from the elements.
Im new here. Been watching newer vids and going back to these. Keep em coming 🇬🇧
A1 that’s that straight drop Dougeefresh. Top shelf life style
The logo should be etched the whole piece of glass. Like stretched out. It looks akward small. Otherwise, good job. Loving it.
13:30 that bundle of wire in the corner kinda looks like a scorpion, would be cool to layout wiring as such.
Awesome EP was laughing the whole way through.
WHAT UP SOUNDMAN in the future u gonna build universal tablet mounts, or make some for the kindle made out of MDF, cheap material for cheap tablet lol let me know
What happened to the other woofer that you already had painted up and installed into the box that you had replaced the voice coil in?
loved the episode i feel we needed more explosions to go with the morning dump
Love your content bro! Awesome humor, epic roasts, blast mode with moma jokes, and quality work being done!!! Ps: miss the mule videos, when you bringing her back out???
“Smoke weed everyday” was funny as hell.... funny episode 😆. love it man awesome job!
Soo after its installed are you gonna drive around with your tailgate off?
Hey Doug, with all the glow in the dark highlights in your sub box, does that mean now you can only drive your car at night?
I'm going to need a dozen of your boxes made how long do you think it would take
Just out of curiosity, how many labor hours do you have in this build?
I wonder if he could put a uv ceramic coating on the window if so that would help the interior of the box alot .
Pro tip, go back and watch the episode where he makes the red sub, that’s the next episode. This is turning into a fast & furious franchise
What make and model is that red hand buffer you use in this video Doug?
Favorite episode yet. I am at a doctors office laughing my ass off.
Best video yet, great job on the box. The way you have that atomic bomb with music in the background instead of the explosion is fucking priceless. Keep up the good work, and funny commentary.
Ey soundman lol love the video but i have a ?
If i have a box tuned to 30hz and the port is say 10Wx10Hx10D.. and i re calculate it to 20Wx5Hx5D at 30hz will it still sound the same as the first port?
Can you make more 12,9" wooden kits? I'd like to buy one ;)
Looks badass but are you putting anything on the diamond plate so it doesn't rust up as soon as water touches it?
Hopesndreams It's stainless steal.
Did I see a Vaydor at time index 16:14? My buddy makes them just a few blocks from my home.
Seeing that you are at home depot so much maybe you should ask them to be a sponsor
Hope you don't take this the wrong way Doug, you a cool guy, hard worker and have some awesome Ideas but, I would have tried a few other positions for the logo that spot just doesn't look right there. Should have put it on the box and left the window clear or centered it better IDK. Not saying I could have done a better job but the logo just doesn't fit. O an Best of luck with the new addition to the family!!
MAJESTIC1 yea the straight logo against the angled window kinda throws it off for me
ok now do a other one exactly the same.. but on a serious note you should try the cork seal black im curious
After you listed the things you need to do before box goes back in....all I could think of is the "2 years later" from Spongebob...Russell was right..lol
What are you planing to do with the other w7 Doug? A giveaway or raffle?
Hells yes dougie. Looks great!