How To Wire DC To DC Step-Down Converter | Electric Scooter With 36v-72v Battery Into 12v 10A Output
HTML-код
- Опубликовано: 13 сен 2024
- This is a step by step tutorial on how to install or wire a dc to dc stepdown converter(12v 10A output) on a bldc controller.
Ideal for 120W load.
Clean and easy wiring/installation of DC-DC converter (step-down converter) for your electric scooter.
GRAB NOW! Ride safe everyone!
DC-DC Step Down Converter 36v-72v into 12v 10A output: amzn.to/477auEg
Digital Clamp Meter Mini AC/DC Current Voltage Resistance Capacitance Temperature Clamp Multimeter: amzn.to/3SvwlRg
GRAB NOW INTERESTING ITEMS FOR YOUR ELECTRIC RIDE!
Bar-End Side Mirror: amzn.to/3FSQ2Le
U7 LED Headlight: amzn.to/47vddHa
Turn Signal Light with built-in flash relay (high rated/best price on Amazon): amzn.to/3udclZB
Turn Signal Light Bracket: amzn.to/3QUNEda
Handlebar Extension: amzn.to/3MCM0uh
Speed Switch (best price on Amazon): amzn.to/49wLxna
Thumb Throttle: amzn.to/49v5haQ
Key Ignition Switch (best price on Amazon): amzn.to/3FV1dTF
Handle Grip: amzn.to/464mrZW
Kiddie Bar: amzn.to/3ubtG50
Mobile Phone Holder: amzn.to/49zRoYQ
On-Off-On Switch (best price on Amazon): amzn.to/46jmX6E
On-Off Switch with LED: amzn.to/40HIc0z
Rechargeable Horn (high rated on Amazon: amzn.to/40C439v
Sa mga gusto ng regular vlogs, check this out.: / @jaysonulandayvlog8365
#converter
#electricscooter
#voltage
#@jaysonulandayvlog8365
Diagram for more accurate detail mga kaadik!
At 6:35
Ride safe everyone!
Finally an English speaking tutorial!
if you use a switching power supply for Alternative Current (written often 100V 240VAC ) you can use it with DC 48V to 72V DC or more The reason is that the AC is converted in DC with a bridge , if you put DC current it will pass through positve of the bridge or negative so you do not care about polarity
It work perfectly and will deliver the iAmp writen on the switching power supply for AC provided that your battery can deliver it of course . If you use it to feed an alternative battery (for GPS security system often) then you should not mixed the negative wire out of the battery because it is regulated from the negative and the battery management system of the battery have a separated negative wire
Very informative Kaadik.Salamuch
Ride safe lage kalakwstsa! Este kaadik!😂
ayus lods may bagong natutunan👌🏻 baka may tutorial ka jan pano i pababain yung low voltage cutoff ng ganyang controller ty in advance🙂
Well detailed pre... Keep it up!
Salamat pre!
Ride safe kayo lage jn team Bahrain🤟
Very good .
Thank you!
Ride safe!🤟
Thank you extremely helpful 🙏🏾🙏🏾
Goodday!
Thank you so much too🤟
Galing mo bro.
Narration tutuorial= okey 👍
Wiring diagram = parang may mali, walang negative power supply ang susian
Goodday kaadik!
Ito un mga keypoints 1:46 4:08
Para mas masundan, check the diagram kaadik
6:33(diagram)
Maraming salamat🤟
Ride safe lage kaadik!
i have an inmotion rs and i got a purevox 12v speaker will this work for that?
Good morning,
I am a novice, I am changing a 60v 1500w 50a scooter controller on my xiaomi pro 2, with a 60v 1200w motor, I have several questions :
on the engine, the green connector: what is its name. Because I have to find these green connectors to replace them on the connectors of the motor cables (yellow, green, blue of the controller)
on the controller
-how do we know what the connectors correspond to (jst, dupont, hb or sm)? And the pin spacings?
-How do we know the diameters of the wires (28 awg, 22awg, 20awg or others?) because if I have to lengthen the wires, I must have the same diameters as the wires of the controllers? I have to buy some
which crimping pliers should I buy in the different cases (dupont, jst, hb or sm)?
for connection tests
the batteries :
60v is good: 1 battery of 48v + 12v or 5 batteries of 12v? or 36v+12v+12v?
during the test on the connection, must we absolutely have the appropriate voltage?
What size of wires is needed? How to know the diameter of the wires (14Awg? 10Awg or others) to connect them in series
For the brakes
I have to connect the front and rear brakes
on my controller
- i have a single yellow plug (2-hole connector): high brake
if I connect the front brake: 1 wire on the yellow cable and the 2nd wire of the brake I connect it or ? And how do I do it?
-i have a white and black cable with white male and female connectors
do I connect the rear brake to the male or female?
Key contactor+tensiometer
on the controller
I have two orange wires with black connectors with two pins which is originally connected
how do I know if the controller is on/off?
When connecting the key contactor and the controller
I have a wire that needs to be connected to the pole + battery?
how do you connect this son to the battery +?
I have a son who must be connected to the on / off of the controller
on my controller I have two orange cables with black connectors with 2 male and female pins? Which ones do I need to connect to?
For the connection
what is the best technique: welding? Which welder do you recommend and wires?
Are there other reliable methods instead of welding?
could you helpe me . thank for answer
Cool! 🤘🏼😁
Sooo, the DC DC 12v draw power from key socket lock? Will the key lock overheat or smthing? It's 10A DC DC right?
Yes, no it will not.
I have tested it already.
Ride safe!🤟
Ayun kaadik salamat tinanong pa kita about dto nung last rides ntn eh...
Kailan kba ulit pd makasama sa ride?
Mio! ikaw ba yan? Hehehehe!
Un niloloko ni aro Keith about sa dual crown fork hehhehe!
Rides tayo pag ok na un fiido hehehe!
Ride safe lage🤟
Ayus!! Chief pabulong ng brand/specs ng controller mo 🙏🏻🙏🏻 will modify also my e10 at gagayahin ko yung controller eh ilallagay ko sa bag 🙏🏻🙏🏻
Goodday kaadik!
Brainpower un brand nun controller 36/48v 1500w.
Goodluck sa pag modify!
Update mo ko ha🤟
Ride safe salge kaadik!
ओके
Aro pigaray amper to tay inkargam ya converter?
Goodday!
Aro 10A labat tan.
Pero maksil la tan.
@@jaysonulanday tnx aro
Sakey labat ta silew so paganaen ko 60v ya escooter say ikabit ko 60-12v 2 ampere converter so ikabit sarag to lan paganaen so 15-125w ya eagle eye?
Goodday!
Bale 24watts so output to tan aro.
Sarag to latan no 15-20watts my silew mo.
idol miron pako tanong bakit hindi na sya nag pofulchards ng 54.6 53.3 nlang normal lang ba
Pag ganyan may problema n un baterya mo.
Soon kailangan mo n palitan yan kaadik.
So if I get one of these, and a fuse, my indicators/signal lights will stop blowing?
Yes, it will supply the neccesary voltage to your signal lights.
Ride safe!
@@jaysonulanday you're a star! Thank you 🛴
@@zigzagtoes Thank you too😁😀
pre, magtayo kana shop ng scooter jan, kayang kaya mo na mag troubleshoot.
Pre marami pa ko kailangan alamin.
Sama na lng ako sa biyahe mo😁
Well done , can you share a link to the converter you use thanks :)
Goodday kaadik!
Here's the link.DC-DC Converter, Step-Down Power Supply, 36V-72V White Step-Down Converter, for Car Electronic Tool amzn.eu/d/00wcSv4
Ride safe lage🤟
Thanks mate :)@@jaysonulanday
Ano wire size gamit mo and ilan amps ang fuse?
Goodday kaadik!
20awg un wire n ginamit ko.
Mas ok kung 18awg wire.
Un fuse nmn 10A.
Ride safe lage kaadik!
why u don't do shop u will be good in it
Idol Dubai ka abudhabi?
Goodday kaadik!
Abu Dhabi po.
Ride safe lage🤟
@@jaysonulanday awww kala ko Dubai he he salamat idol
Labo wala ditalye bos kaw lng nkaka alam
Goodday kaadik!
Panoorin mo maige, kompleto yan.
Or sundan mo n lng un diagram 6:35.
Ride safe lage kaadik!
hey am from dubai i want to connect new signal lights but i don't know how can u do it for me i will come to you and i will pay for you i have electric bike and am 15 years old can u help me 🥺🙏🤍
I can help with electronics wiring :)
Wag kna video
Sir ng pm po ako sainyo sa fb
bro can you video call me and help me hook up my 12v system i will pay
hello do you have any way to talk to you like Instagram or WhatsApp