"A few areas of concern to work with." I would have to agree but you did a nice job. RUclips videos never do justice to the amount of work required for a job like this. Well done.
Nice Video! I don't think I can sand blast my trailer... I have been hitting it with rustoluem. Mainly the L shaped pieces of metal that hold the bunks are are very rusty and falling apart. Any advice on what to do besides hitting it with rustoluem?
Typically with boat trailers, the wiring is usually run inside the tubing. This prevents the wires from getting cut or damaged during usage. You may want to consider rerouting the wiring inside the trailer tubes rather than outside them. It will make for a far more durable and reliable trailer in the long run...
Hi Rick thanks for the message, with the wiring harness i purchased it didn't allow me to run down the chassis but in the future i will we putting the wiring in PVC tubing to prevent damage and make it look a lot more aesthetically pleasing ! thanks for watching :)
@@AngryMackAdventures haven't fitted on yet but my boat or trailer isn't as nice as yours. But there are plenty on eBay and some googling will put you in the right direction But it's cheap and well worth doing
Nice vid! I’m doing similar with my trailer. Is there any issue with sanding down the trailer from rust, and then spray painting it. I just don’t want to spend too much money. And what exactly did they do in the shop that you took it too. I’m new to this and wouldn’t have a clue what they did to your trailer. Cheers.
Hey mate, spray paint isnt very good with salt water, galvanise is alot stronger, if you plan to keep for a long time, i recommend it.. its not as expensive as you think if you can sand blast it yourself :)
not gonna lie when you said you got it back from the galv shop i was dumbstruck. i would have welded it up and put a thick coat of paint on for much less money. having said that the thing looks like new. no doubt you will be losing money on this build but i appreciate the craftsmanship and care your putting into it.
Looks like a TrailIt trailer. I have one also for my Genesis. I dont think they were dipped or built very well to be honest. Mine needs to be stripped apart. Looks worse than yours!
Not trying to put you down mate but being a professional blaster sprayer for over 44 years you should never blast without a air fed blast helmet just saying as seen to many accident's in my time
Hi Darryl, thanks for watching, as mentioned in video rims are going to be changed and near future will be wrapping axles in grease wrap to protect, yes gold galv is not that great but a lot better protection then nothing.
"A few areas of concern to work with." I would have to agree but you did a nice job. RUclips videos never do justice to the amount of work required for a job like this. Well done.
that is exactly right, many hours of work for a short video :') thanks for your support!
So handy having all the tooling on hand !!!
Also the space to do it all .....
Nice Video! I don't think I can sand blast my trailer... I have been hitting it with rustoluem. Mainly the L shaped pieces of metal that hold the bunks are are very rusty and falling apart. Any advice on what to do besides hitting it with rustoluem?
Typically with boat trailers, the wiring is usually run inside the tubing. This prevents the wires from getting cut or damaged during usage. You may want to consider rerouting the wiring inside the trailer tubes rather than outside them. It will make for a far more durable and reliable trailer in the long run...
Hi Rick thanks for the message, with the wiring harness i purchased it didn't allow me to run down the chassis but in the future i will we putting the wiring in PVC tubing to prevent damage and make it look a lot more aesthetically pleasing ! thanks for watching :)
Dude that trailer transformation is goldddddd
Really enjoying your videos mate!
Very inspiring! 😁
Love the space to work you have. It’s halve the job.
Hey mate, great video!
Where did you find all the information regulations for trailers?
Thanks for sharing mate , great to see ya bring the old gal back to life 👌
Glad you enjoyed it mate! thanks for watching!!
Turned out real good mate.
hide a gps tracker in it.
Will be a target when left at ramps.
Same as the boat.
Cheap and good to have.
wow thanks for the tip shaun, did you have any brand that you found good?
@@AngryMackAdventures haven't fitted on yet but my boat or trailer isn't as nice as yours. But there are plenty on eBay and some googling will put you in the right direction
But it's cheap and well worth doing
Good work mate, well done
Thank you! Cheers!
Looks great
Thanks mate!
bro trailer is looking sooo good
thanks my man!
Hey mate ,great work
Fyi thou, not recommended to paint wheel hub faces , should always be clean bare steel
Trailer came up mint !
Nice work!!!!
Hey mate, do you know who/where could sand blast my trailer for me? I need to get the silver spray paint off before it goes in for zinc dipping.
Thanks, Mack!
You're welcome!
Love what your doing , i might have bought new axles all the same. Great stuff.
Thanks for watching mate! yes these were in pretty good condition so left them 👍
Good series
Trailer looks great, I've used the dulux cold gal it's a great product.
it sure is! thanks for watching :)
@@AngryMackAdventures good channel looking forward to the next episode
The trailer looks a million dollars Nick your like me I love doing things myself on my boat I got a Northbank 550 Cuddy cheers 🎣
thanks a lot Joe! Oh wow, something about restoring a boat isn't there!
Hey mate! Great vid! all up what did it end up costing you? Cheers!
AWESOME VID MAN! Did this exact same process with mine too hey, so interesting and such a good feeling when its done.
It def is a great feeling to get it done! man i need to come up on yours hey, im frothen a rankin now
Bearing buddies on them bearings will save a lot of headaches.
Yes definitely!! Doing a video on wheel bearing change so will do this whilst I’m at it. Thanks for watching roger 😏
very good job.
Thank you! Cheers!
Good Job😂...
nice video men thank you for share
It came out really well great work 👍
Much appreciated!
Nice work keep it up.
We’re can we see that price listing
Where do you get your parts from?
use a Dremel grinder do the wheel hubs buddy
I wish you had shown the repair with that hole !
Surprised you didjt got a new age trailer hitch that thing is so old school
Would it be possible to take rust off with metal wire brush?
Hey Mate, yes absolutely but it will be time consuming!
Good video. I need to restore my boat trailer as well
You should! great feeling having restored trailer!
Angry Mack Adventures Thanks for replying. I will do it.
How much did you spend if you don't mind me asking? Cheaper than a new trailer I presume
What did they charge for re-Gal?
Nice job. Why did you call it "fully galvanized" ? Is there such a thing as part galvanized? If the axles are not galvanized is it fully galvanized?
you know what i mean :P
Nice vid! I’m doing similar with my trailer. Is there any issue with sanding down the trailer from rust, and then spray painting it. I just don’t want to spend too much money. And what exactly did they do in the shop that you took it too. I’m new to this and wouldn’t have a clue what they did to your trailer. Cheers.
Hey mate, spray paint isnt very good with salt water, galvanise is alot stronger, if you plan to keep for a long time, i recommend it.. its not as expensive as you think if you can sand blast it yourself :)
Mind me asking how much your hot dip galvanising was per kg? I have some quotes in Brisbane and its pretty expensive.
not gonna lie when you said you got it back from the galv shop i was dumbstruck. i would have welded it up and put a thick coat of paint on for much less money. having said that the thing looks like new. no doubt you will be losing money on this build but i appreciate the craftsmanship and care your putting into it.
Thanks Alot mate, yeah do it once do it properly why not :')
@@AngryMackAdventures awesome to see it all runs well on the water mate been enjoying watching the videos as they come out
Man how do you know how to do all this haha!! 😂
HAHA years of experience my friend :')
Well done. Good video. One suggestion...can do without the silly background music.
Looks like fresh from the factory. Almost too nice to dunk it in salt water. Almost...
wow
Costs?
How much
Looks like a TrailIt trailer. I have one also for my Genesis. I dont think they were dipped or built very well to be honest. Mine needs to be stripped apart. Looks worse than yours!
All that wonderful work on the trailer and you neglect the most important part of the trailer, the Axle.
Hi John sorry what am I neglecting? Axle is solid steel
Not trying to put you down mate but being a professional blaster sprayer for over 44 years you should never blast without a air fed blast helmet just saying as seen to many accident's in my time
Ohh wow , yeah we tried hooking it up but wasn’t working so left it. We will definitely be using for next time, Thanks for watching
Great work, but I,d rather hear a grinder than that music.
Noted! thanks Joe :)
It's only good luck if they shit on ya head good job bloke just about to do the same thing
cold gal does absoultley nothing
Hi Darryl, thanks for watching, as mentioned in video rims are going to be changed and near future will be wrapping axles in grease wrap to protect, yes gold galv is not that great but a lot better protection then nothing.
Wouldn't it be smarter to just buy a new trailer compared to restoring one.
Lets galvanise a rusted piece of shit to prevent it from rusting...perfect logic. 😂 Typical Aussie logic.