Motorized Gas Scooter - One Year Update/Cruise.
HTML-код
- Опубликовано: 6 сен 2024
- Welcome to my one year update of me owning the 49CC 4 Stroke Blaze-Scooter! I will be going over what has gone wrong, everything I've had to maintain, and anything I've added to the scooter so you all can know what to expect after buying one.
Find this scooter here: blaze-scooter....
Music: • Future Bass Type Beat,...
Hello everyone please use Full synthetic Motor oil and gear ⚙️ oil trust and believe it will run a lot smoother with more power and last very long wont break down as fast as conventional oils and better quicker starting in cold 🥶 and hot weather. Thing will last forever one more thing Premium fuel ⛽️ is recommended by Blaze do not use 87 u can but engine will crap sooner on 87 if u use 91-93 like blaze says u will put thousands on this little thing.
What he said! That's what I use for oil in mine and always use 92 fuel. Thanks for the comment!
I knew about the oils but not the fuel type since I do t own one yet. Can you help me with one question of mine here below.
Hi can you tell me if I were to keep this in my room after use so it doesn’t get stolen since I live in a dense city and have no garage, will gas fumes leak at all or is it pretty sealed and gas fumes will not be an issue indoors?
Same fender weld broke for me I welded it back on though
Mine broke too. I replaced it with a l bracket.
Hi can you tell me if I were to keep this in my room after use so it doesn’t get stolen since I live in a dense city and have no garage, will gas fumes leak at all or is it pretty sealed and gas fumes will not be an issue indoors?
My scooter wont start. I have not started it in about a year. Tried all morning. No luck.
Considering it hasn't been started in a year could be bad gas and or the carburetor got gummed up. Try with new gas and with the choke on see if it starts also prop the back side of the scooter up off the ground and give it half throttle while trying to start it.
2:18
Can you give me a link to this particular cold air intake filter?
Was that Choke Lever a separate aftermarket part?
If so, can you give me a link to where you bought this choke lever?
Is that the original factory carb?
If not, can you include a link to where you purchased the carb?
Any other links to parts & accessories would be greatly appreciated.
I recently ordered this scooter from the same company just days ago. I'm really excited for its arrival. 😁
Your videos and those of SK Lifestyle admittedly pushed me in that direction, and I'm sure I'm not the only one. 😂👌😁
Please keep the Blaze Scooter Content coming...THANKS SO MUCH Sir 🙏👍✌😁
I am so sorry for not responding as quick as I should have!! I'm releasing a video tomorrow or Friday covering the upgraded carburetor, cold air intake and two other mods I've recently installed, the links to those all will be in that video description but I can link you to the carb and the intake filter now.
I appreciate your support for the channel, there will be a lot of content for the scooter as I continue to modify it to reach my goal of 30+ mph on it. You will absolutely love the scooter when you get it! If you have any other questions feel free to ask.
Mannial WYK-186 Carburetor a.co/d/7ZdpAWI
RUTU CNC Upgrade Kit Air Filter a.co/d/3YqdfY4
@@nwsights6301 Oh no problem. LIFE derails us left and right on a moment's notice....it happens to us all. ☝️😉
My scooter should arrive in about a week. 🎉🤸♂️😁
I live on a US Territory, GUAM USA 🏝🇬🇺🇺🇸
THANK YOU for the links 🙌🤙
Lookin forward to all your upcoming Blaze 4-Stroke Scooter content.
You take care my friend 👌😊
@@dailypaywithclay Yes it sure does, you plan to make any videos about your scooter when you get it?
i striped the screw I was ueing it for a hitch for a child trailor im going to make a camper out of foam and por mans fiberglass
The fender screw?
@@nwsights6301 the the whole I have driven 300 miles in a week plan on going to Austin Wich is 140 miles Only problem was seat bolts came lose but that's 40 miles a a day
@@danyalarafat1271 That's a lot of driving on it nice, yea check the screws and bolts etc stuff likes to come loose over time I check over mine after each ride.
Hey NW thanks for the great vids and reviews. I finally got mine, but could only get 19 mph max. I ordered the cold air intake filter so hopefully that might help a little, even if it just makes it a little more responsive. Could you tell me what size screws you used as you said the stock ones were not long enough. Thanks sgain
also dont change the motor oil when it gets dark all motor oil gets dark run it for like 10 months and change it itll be fine also lower your idle ik people say raise it for more power but thats not true its stupid
I wasn't aware I didn't have to change it as much as I've have been that is great to know! I know oil gets dark but I'm always paranoid with the reliability of the motor. The idle I was playing with and thought I got it back to normal how much lower should I make it? And for the weld I didn't have a welder otherwise I would have did it and it fell off while I was riding didn't notice til I got home lol.
@@nwsights6301 lmao I caught my fender while I was in my driveway, so I got lucky I have a welder just a cheap Lincon electric flux core one nothing special but yeah, I understand your paranoia about the oil changes those little engines are indestructible just want to save you some money on oil changes if you ride it often like daily id say about 10 months to a year
Have your engine idle just like this ruclips.net/video/2OFhsl8xvk0/видео.html
@@seanmckay3392 I'm certainly investing in a cheap welder, been considering building a whole custom scooter.
@@nwsights6301 yeah man that sounds great do that get the "titanium easy flux 125" inverter welder from harbor freight better than my old transformer based welder lighter too
@@nwsights6301 put full synthetic 10w-30 oil in it better gas mileage and HP fuel ⛽️ in the instructions blaze emailed me it says use 91 octane I’m thinking of using 100 h octane.
2 strokes get 35mph with only a gearing change and no other mods like a pipe or porting or top end.
I have heard that from multiple people. It's on my list to try 2 stroke!
@@nwsights6301 they're a blast. And 35mph is plenty fast on a stand up scooter. Just remember the more engine modding you do, the worse you get in terms of reliability. Not a fan of pipes and top end kits etc unless you feel like rebuilding your engine regularly.
@@kimjongun2946 I don't plan to do any major internal mods I don't think.
i put a hitch on the back i but dual brakes with one lever do u have a video on that carb
What kind of hitch? I haven't got around to making a video on the carb yet.
@@nwsights6301 it was 4 l brackets flatten 2 on top and 2 on bottom I used want ihad and tow a bike trailer I also Bent the fender thing tube off the engine and brought it away from the tire I wish this guy sold different parts for performance
@@danyalarafat1271 Funny because I've been thinking of somehow installing a hitch on mine to tow around my daughter in a little trailer thing nice idea. There are a lot of performance mods out there they aren't all specific to this scooter but will work.
@@nwsights6301What's the status on this upgrade video, and will you be uploading a video on the carb that you installed? I just read about the carb change from some commenters. However, I don't recall hearing you mention that you replaced the factory carb. I only heard you mention installing an aftermarket cold air intake filter with a built-in choke lever at 2:17?
@@dailypaywithclay I didn't mention the carb before because I ended up changing it out a little later on. Unfortunately I haven't gotten around to making the video yet about the carb due to the heat I've been having where I live.
Hello,
What kind of oil do you use on it and what grade of gas? I'm ordering one soon. Thanks
I have been using 4-Stroke Oil 10w-30 you can buy a quart at Walmart, I put premium gasoline in my scooter as it helps with performance. To help keep the motor and carburetor clean as well you can add Lucus Fuel Treatment to the gas tank it made my scooter run a lot smoother.
@@nwsights6301 thank you! I just ordered my Blaze scooter a few minutes ago! Looking forward to it 😃
Do you ride full throttle all the time
Not all the time but mostly yes, I like to get the scooter moving as fast as it can go.
Hey NW Sights, I got my new air filter kit today. Do I use either of the supplied gaskets when mounting the filter or are they just for the supplied carburetor if you choose to use it? Thanks again and I'll be sure to post here when I get the results!
Don't think you have to use a gasket for the filter that should just be for the carb
Hey NW, can you please tell me where you got the longer bolts to attach the cold air intake filter? I can't find one anywhere around here.
I went to Home Depot to get the bolts I bought a couple different lengths and used the ones that worked.
We only have Lowes near me and they didn't have what I needed. Next time we go by Jacksonville NC, I'll check out the Home Depot there. Thanks for your help.
can you give me the carb info so i can buy one also i am geting a four quart tank med july from goose grips they moved to my hood in texas
Mannial WYK-186 Carburetor Carb a.co/d/dUGSOle
You mentioned about changing the motor oil and the gear oil for the transmission. Are they 2 different things? I thought you only had to put 10w30 in the crank case? Thanks again.
Sorry, I read the manual but not the other pages of info. Just read it now where it said there was just enough gear oil for testing purposes. Hopefully I didn't test it too much. I just went back and forth a few times in front of our house.
The engine makes a little to much noise. because it does not have a muffler. Do you recommend any mufflers for this scooter?
Not yet but that's on my list to figure out as well, there will certainly be a video out covering the muffler when I figure out how I'm going to install one. 🤟
Nice video. Know where I can find an oil change tutorial?
I'm happy to hear you enjoyed the video! I'm not sure specifically where you can find an oil change tutorial might be one on RUclips for a different brand 49cc engine but I can definitely film one if you'd like for this scooter.
@@nwsights6301 Cool. I couldnt find one for our scooter either. Why is motor oil not bio degradable? Changing it and recyling it id always a pita. I would love to see a tutorial if youre so inclined.
@@Enemiesexposed Darn well I'm out recording a video of the scooter currently about how far I can go on the one liter gas tank, I can definitely upload a tutorial though for the oil change soonest I can have that up would be Thursday. 😁
What engine are you using? Its a very good sounding, running engine you got there!
It's called the Huasheng 49cc 4 stroke.
No, that's GX50 @@nwsights6301
@@jhonlloydanadio4074 It's a clone of that engine but yes basically the same thing.
Also do you think there is a way to mod the gas tank to at least get a one gallon of fuel in it at a time?
Probably so just will depend on what kind of gas tank you can find. You could probably use some metal brackets to mount a bigger gas tank on to the existing holes where the original tank mounts on to.
@@nwsights6301 if i do it and it comes out well, I’ll share how I did it. Thanks for sharing so far with the rest of us and please ride safe. God bless.
@@PeanutHut Would love to see how you do it. And no problem you ride safe as well, more people should get this scooter!
Hi can you tell me if I were to keep this in my room after use so it doesn’t get stolen since I live in a dense city and have no garage, will gas fumes leak at all or is it pretty sealed and gas fumes will not be an issue indoors?
It would only smell a lot after u use it. If you let it sit and cool down the smell shouldn’t be bad
I just got my Blaze 49cc 4 stroke yesterday and took it out for a ride today! Could only get it to 19 mph. I ordered the cold air intake filter. Any suggestions on increasing speed besides losing a little weight as I'm almost 200 lbs.
My 200 lbs friend was able to get mine up to 25, these small engines just take a lot of messing around with sometimes but the air filter should help with response and give you at least 1 mph, with the choke on my filter the on and off markings were backwards so when it on set to off then the choke was on so inspect yours to check that out. A carburetor upgrade will greatly help as well.
@@nwsights6301 I tweaked the idle up and down, still maxed out around 18-19 mph. Looking forward to installing the cold air intake filter, it arrives tomorrow.
@@GlennBaker60 Let me know how it goes. Also the bolts you'll need will be the same size as the ones already on the scooter but just slightly longer.
@@nwsights6301 thanks I will. I also noticed my tire pressure was pretty low, around 15 psi. I got the front filled but guess I need an extension to reach into the back tire valve. I guess that low tire pressure can affect lower top speed as well.
Yes you do need a extension to reach the valve for pumping up the tires, Blaze Scooters sells one but Amazon has a ton which are much cheaper. @@GlennBaker60
Top speed?
Just took it out today after tuning it changing the fluids along with fitting a new carb on it, according to my GPS speed app I clocked 30 mph on flat ground with wind blowing at my back. One of these scooters totally stock will go at least 25-27 easy.
Love your videos man was wondering if i could get a link to the air filter you used
Thank you I really appreciate your comment!
a.co/d/aWZdbpL
That's the link to the air filter, I didn't use the carburetor that comes with the kit because the intake manifold didn't fit on my scooter motor so I just installed the filter and choke with my stock carb with two longer bolts from Home Depot. 🤟
Thank you so much also you mentioned gear oil but i can’t find anything on that only engine oil I was wondering what oil you used and how often
@@jaredjones1944 I use 80w-90 synthetic gear oil. I haven't changed it in a year am considering changing it this weekend, I'll have a video posted of the process.
Do you leave the choke up or down when you ride?
Well if the engine is cold and im starting it up I leave the choke on which is closed until the engine warms up, then I switch it off which is open. As long as the engine has been warmed up you can leave the choke off but when I'm riding I always leave it off/open otherwise it would stall with any throttle.
Did you get a certificate of origin when you bought it? I want to get one, but here in North Carolina you have to register it with the DMV so I'll need that certificate.
I wouldn't say a certificate of origin but it had plenty of paperwork stating the company where it came from and what it is. You shouldn't have to register it I don't see how you even would that's weird.
Freedom of movement look in to it not sovereign citizen but scooter
Where do you get one and how much
Scooter wholesales google blaze 49cc 4 stroke gas scooter and look for the scooter whole sale site it's 600 bucks
I noticed it's called the Urban Scooter here. Is it exact same as the Blaze 49cc 4 cycle scooter, just a different name? Also, where do they ship from. I read that Blaze ships from Myrtle Beach SC. I'm in Coastal NC so was thinking it might get here pretty fast from there
@@GlennBaker60 I'm pretty sure that is indeed where they ship from, their website should have most of the information I only know this scooter by the name of blaze scooter but there are other ones that are the same with other names I have seen.