Piyush, Thank you so much for this wonderful step by step tutorial. I followed your detailed instructions and fixed my fan and my overheating issue. This the best tutorial for this issue and brand on the net. Your are the best! Mark
Great video. I can't get the top left screw on the motherboard out (to the right of the fan at 5:53) as it's different than the other phillip screws, what screwdriver head do you use to remove this screw? thanks!
In may case it was T4 screw, However you could check the grove on the screw and select the particular screwdriver head. BTW Thanks fro the complement and you your valuable comment. :-)
Off-course one should have this fear, then only you would be more couscous while opening it. any way it is not recommended in case you are not having any experience or if you are not a technical person. Caution: One should not consider the above written sentence/paragraph as an encouragement to open the laptop......!!Open it at your own risk...!!
Hi piyush, It was a great video problem with my laptop was the dust blocked the fan so instead of removing motherboard I just removed the fan by opening its screws and cleaned but when I am pressing power button the laptop is not starting no led is glowing. What should be done please help
did u checked if you have connected the power cable after putting the cover on which keyboard is getting fixed. >>>click on the below link to see where I am connection the power button cable:- ruclips.net/video/QXfoom8HiO8/видео.html
@@PiyushPrasoon I have the same problem and I checked power cable also, I have conncted it, please help. If I connect charger, charging light gets on, but laptop is not getting start. Please help me sir
@@pavankumarkv7001 I can suggest you only to check the assembly, if LCD cable is properly connected. okay do the below checks: 1. After pressing power button - any LED glowing, is fan turning on, do you here any laptop starting sound(could be heard in very silent place) 2. If the above step is not working then you have to try turning it on without connecting power cable - just to check, as it might be possible power cable may have an issue. so the place were power cable is getting connected you have to short the 4 pins on the connector directly with the help of a small piece of wire. come to google chats or FB let discuss there mail: piyushprasoon91@gmail.com FB: facebook.com/ThePrasoon.Tech
Hi Piyush, thanks for this awesome step by step guidence. I have followed all steps, but problem I am getting with my N4010 is it is not power on after assembling it back. I have tried with battery as well as direct charger without battery n with battery but it's not powering up. I can see only one led of extream right(3rd from left) is blicks only once when I power on n then no led is showing light or blinking. Can you please help me with next step?
Hey @Tarun Gupta, @Md Dhuan is correct, BTW please do the following checks as well: 1. After pressing power button do you feel like HDD starts rotating? you have to listen it carefully at quite place. 2. Does it beeps, if it is how many beeps you are getting (beeps will always happen in sets eg: 123 123 123) 3. Is back light of LCD turning on? >> If above checks are done then do the physical connection checks carefully. 1. all data bus or cables is connected properly 2. try turning it on by reversing the RAMs in the slots 3. Try with only one RAM installed in it (do the check with both RAMs one by one)
Nice presentation. Hi , presently I am having the same model.Problem is , windows not opening,it says start up repair,also problem signature 1to 7 and overheating.plz help.
please take care for the following points: 1. if it is going to repair mode, take back of your date and then install a fresh OS . 2. After doing above step, signature issue will be resolved automatically 3. Over heating problem could be fixed by cleaning the laptop from inside. you could check my video to open it up properly.
Sir is it necessary to apply good quality thermal paste,because I am confused that online price is very high and in local market price is very less please suggest me.
Piyush Prasoon Thanks for reply. Sir I have clean fan and repaste heatsink but my laptop is currently turn off automatically without warning. what should I do, please tell me it will be helpful to me. I operate laptop without battery and only on charger. thanks
Even though your battery is not giving backup, you should use battery while you are switching your laptop on. The condition which you have explained above depicts that your laptop is having some heating problem or else it might be the problem with GPU. Install some light weight heat monitoring software in your laptop and watch is simultaneously to get the the temperature of your laptop just before it is turning off. Note the time, for how long you have used the laptop before it turned off. I also want to know which application you are using simultaneously when you laptop was on. Did you cleaned the ventilator/heat sink fins via which hot air is coming out?
@@PiyushPrasoon I have the same problem then i just replace the thermal paste with $5 thermal paste and then it didnt go turn off automatically then when putting thermal paste in cpu its ok to use more thermal paste
Thermal paste is used to create a proper bound between 2 metallic surface, so need not to apply access thermal paste, apply as per the surface area requirement and the layer should be approximately 0.5mm or less than 0.5mm thick.
Don't even do that, it may damage your GPU and Processor permanently. Get a thermal grease from market (electronics market) it is very cheap. It comes in INR 20 and that amount of grease will sufficient for your laptop.
@@LuxurySharton You could get a little from any computer repairing shop. or you can get it online(but it will a bit costly): www.amazon.in/DIGIFLOOR-Thermal-Compound-Coolers-Chipsets/dp/B083ZV56NT/ref=sr_1_1_sspa?dchild=1&keywords=Thermal+Paste&qid=1622678043&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExN0dQN0xEQVlWOVNJJmVuY3J5cHRlZElkPUEwMjM0MzcyM0NLWjlSUEtKSlpETCZlbmNyeXB0ZWRBZElkPUEwMjA3NDg0M1JZN1dWOUVWWEM0TyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
I am not sure but you can confirm the pin configuration first by a good technician. if the pin configuration matches the processor slot the it is possible.
@@PiyushPrasoon I found the i5 580M processor which support the socket. But the MHz of the i5 processor is 2.6MHz which is same like as the old i3 processor. By replacing the processor, is it make faster performance?
@@dinez96 off-course, speed is one parameter, however other then speed there are might be many things which which would have been taken care in the 5th Gen processor. Please try it at your on risk, this things are a bit critical, do proper research and make it out under a live guidance of an expert computer technician. I have not tried this on my but I heard it could be done
Just let me know few thing: 1. Is any LED turns on when you are pressing the laptop power button. 2. Is you laptop is making any beep sound after pressing power button. 3. It would help me to trace back the exact issue of your laptop if you could let me know how and when it got malfunctioned.
@@PiyushPrasoon it worked. Great Video, thanks. But, my main purpose was to make the fan working, it's working when I cleaned and reattached the cable but it's making very vibratory noise, My complete Laptop is trembling.
@@aarushsharma5966 If you want to go with an easy solution, the you could proceed by replacement of old fan with the new one, it will cost you around INR 500. Other solution is that, you need to check inside the fan carefully, it may have certain situation given below: 1. Check the fan shaft if it is stable. (fix the fan shaft properly and precisely with the help of super glue). 2. check if there is any dust on the fan shaft. (Clean the dust properly and apply lubricant on it (trimmer machine oil will be best) 3. Check if any of the fan blade is damaged or having any crack on it, even a minute crack. (fix the crack precisely with the help of super glue.)
Here's what I find ironic. The cheap consumer laptops of this era, even Dell are much harder to open then their business lines, yet if you shop carefully their business laptops are much cheaper. My thought simply is this. If it's hard to open, it must be more expensive to build, and repair thus actually costing more. It just seems silly to me.
Hey Nitu, I guess you just need to clean up your laptop. Be careful while opening it. You youself will be responsible for any damage. I would recommend you to take you laptop to a certified technician.
Piyush,
Thank you so much for this wonderful step by step tutorial.
I followed your detailed instructions and fixed my fan and my overheating issue. This the best tutorial for this issue and brand on the net.
Your are the best!
Mark
Hey Mark,
Glad to know that.
thank you so much for you valuable feedback.
heartful of thanks to you..!!! 😊
Great video. I can't get the top left screw on the motherboard out (to the right of the fan at 5:53) as it's different than the other phillip screws, what screwdriver head do you use to remove this screw? thanks!
In may case it was T4 screw, However you could check the grove on the screw and select the particular screwdriver head.
BTW Thanks fro the complement and you your valuable comment. :-)
😲 very nice explanation 👌 lovely but still i am scared to open 😳
Off-course one should have this fear, then only you would be more couscous while opening it.
any way it is not recommended in case you are not having any experience or if you are not a technical person.
Caution: One should not consider the above written sentence/paragraph as an encouragement to open the laptop......!!Open it at your own risk...!!
Hi piyush,
It was a great video problem with my laptop was the dust blocked the fan so instead of removing motherboard I just removed the fan by opening its screws and cleaned but when I am pressing power button the laptop is not starting no led is glowing. What should be done please help
did u checked if you have connected the power cable after putting the cover on which keyboard is getting fixed.
>>>click on the below link to see where I am connection the power button cable:-
ruclips.net/video/QXfoom8HiO8/видео.html
@@PiyushPrasoon I have the same problem and I checked power cable also, I have conncted it, please help. If I connect charger, charging light gets on, but laptop is not getting start. Please help me sir
@@pavankumarkv7001 I can suggest you only to check the assembly, if LCD cable is properly connected.
okay do the below checks:
1. After pressing power button - any LED glowing, is fan turning on, do you here any laptop starting sound(could be heard in very silent place)
2. If the above step is not working then you have to try turning it on without connecting power cable - just to check, as it might be possible power cable may have an issue.
so the place were power cable is getting connected you have to short the 4 pins on the connector directly with the help of a small piece of wire.
come to google chats or FB
let discuss there
mail: piyushprasoon91@gmail.com
FB: facebook.com/ThePrasoon.Tech
Hi Piyush, thanks for this awesome step by step guidence.
I have followed all steps, but problem I am getting with my N4010 is it is not power on after assembling it back.
I have tried with battery as well as direct charger without battery n with battery but it's not powering up.
I can see only one led of extream right(3rd from left) is blicks only once when I power on n then no led is showing light or blinking.
Can you please help me with next step?
On top of this has happened after changing my fan to new one
Must be ram didn't install properly.. try take it out first, then install back.. hopefully that will help
Hey @Tarun Gupta, @Md Dhuan is correct, BTW please do the following checks as well:
1. After pressing power button do you feel like HDD starts rotating? you have to listen it carefully at quite place.
2. Does it beeps, if it is how many beeps you are getting (beeps will always happen in sets eg: 123 123 123)
3. Is back light of LCD turning on?
>> If above checks are done then do the physical connection checks carefully.
1. all data bus or cables is connected properly
2. try turning it on by reversing the RAMs in the slots
3. Try with only one RAM installed in it (do the check with both RAMs one by one)
Hello Sir ji, Same leptop h, Heating shut down Problems h... solve Please
If it is producing 8beeps then its the same issue
so you could go with the same refurbishment.
Nice presentation. Hi , presently I am having the same model.Problem is , windows not opening,it says start up repair,also problem signature 1to 7 and overheating.plz help.
please take care for the following points:
1. if it is going to repair mode, take back of your date and then install a fresh OS .
2. After doing above step, signature issue will be resolved automatically
3. Over heating problem could be fixed by cleaning the laptop from inside. you could check my video to open it up properly.
Hi Piyush,
Thank you so much for this video! I restored my laptop's cooling fan to working condition.
How you did ? What you did ? Can you tell me
Sir is it necessary to apply good quality thermal paste,because I am confused that online price is very high and in local market price is very less please suggest me.
get the local one, The thermal geese which I used in this video cost me INR ₹ 20. you will get the ₹ 10 syringe also. It will definitely work for you.
Piyush Prasoon Thanks for reply. Sir I have clean fan and repaste heatsink but my laptop is currently turn off automatically without warning. what should I do, please tell me it will be helpful to me. I operate laptop without battery and only on charger. thanks
Even though your battery is not giving backup, you should use battery while you are switching your laptop on.
The condition which you have explained above depicts that your laptop is having some heating problem or else it might be the problem with GPU. Install some light weight heat monitoring software in your laptop and watch is simultaneously to get the the temperature of your laptop just before it is turning off. Note the time, for how long you have used the laptop before it turned off. I also want to know which application you are using simultaneously when you laptop was on.
Did you cleaned the ventilator/heat sink fins via which hot air is coming out?
@@PiyushPrasoon I have the same problem then i just replace the thermal paste with $5 thermal paste and then it didnt go turn off automatically then when putting thermal paste in cpu its ok to use more thermal paste
Thermal paste is used to create a proper bound between 2 metallic surface, so need not to apply access thermal paste, apply as per the surface area requirement and the layer should be approximately 0.5mm or less than 0.5mm thick.
Bro I used corsair tm30 performance thermal paste is it ok
Yes its okay.
Bro I don't have thermal grease is it ok if I don't it on the CPU and just run it plz reply
Don't even do that, it may damage your GPU and Processor permanently.
Get a thermal grease from market (electronics market) it is very cheap. It comes in INR 20 and that amount of grease will sufficient for your laptop.
@@PiyushPrasoon thank you I will
And bro from which shop I can get the thermal grease plz tell
@@LuxurySharton You could get a little from any computer repairing shop.
or you can get it online(but it will a bit costly):
www.amazon.in/DIGIFLOOR-Thermal-Compound-Coolers-Chipsets/dp/B083ZV56NT/ref=sr_1_1_sspa?dchild=1&keywords=Thermal+Paste&qid=1622678043&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExN0dQN0xEQVlWOVNJJmVuY3J5cHRlZElkPUEwMjM0MzcyM0NLWjlSUEtKSlpETCZlbmNyeXB0ZWRBZElkPUEwMjA3NDg0M1JZN1dWOUVWWEM0TyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
can i do it without thermal grease
No, that would not be a sure shot solution for this problem.
Can we replace the i3 processeor to i5 processor in this laptop?
I am not sure but you can confirm the pin configuration first by a good technician. if the pin configuration matches the processor slot the it is possible.
@@PiyushPrasoon I found the i5 580M processor which support the socket. But the MHz of the i5 processor is 2.6MHz which is same like as the old i3 processor. By replacing the processor, is it make faster performance?
@@dinez96 off-course, speed is one parameter, however other then speed there are might be many things which which would have been taken care in the 5th Gen processor.
Please try it at your on risk, this things are a bit critical, do proper research and make it out under a live guidance of an expert computer technician. I have not tried this on my but I heard it could be done
Hi Piyush. I followed your instructions, but my laptop won't turn on at the end and I don't know why 😢
Just let me know few thing:
1. Is any LED turns on when you are pressing the laptop power button.
2. Is you laptop is making any beep sound after pressing power button.
3. It would help me to trace back the exact issue of your laptop if you could let me know how and when it got malfunctioned.
@@PiyushPrasoon screen is not showing anything.. 1 led is glowing.
@@aarushsharma5966 is it blinking or constantly glowing. If it is blinking, how many times it is blinking in same time interval.
@@PiyushPrasoon it worked. Great Video, thanks. But, my main purpose was to make the fan working, it's working when I cleaned and reattached the cable but it's making very vibratory noise, My complete Laptop is trembling.
@@aarushsharma5966 If you want to go with an easy solution, the you could proceed by replacement of old fan with the new one, it will cost you around INR 500.
Other solution is that, you need to check inside the fan carefully, it may have certain situation given below:
1. Check the fan shaft if it is stable. (fix the fan shaft properly and precisely with the help of super glue).
2. check if there is any dust on the fan shaft. (Clean the dust properly and apply lubricant on it (trimmer machine oil will be best)
3. Check if any of the fan blade is damaged or having any crack on it, even a minute crack. (fix the crack precisely with the help of super glue.)
Thank you bro it was very helpful 😇
Glad to know it helped you.. :-)
Here's what I find ironic. The cheap consumer laptops of this era, even Dell are much harder to open then their business lines, yet if you shop carefully their business laptops are much cheaper. My thought simply is this. If it's hard to open, it must be more expensive to build, and repair thus actually costing more. It just seems silly to me.
Very well elaborated. Thank you.
You are always welcome...!!
Please sir help me heating and fan sound high
Hey Nitu,
I guess you just need to clean up your laptop. Be careful while opening it. You youself will be responsible for any damage.
I would recommend you to take you laptop to a certified technician.
Good sir