How to Make Arduino Robot Car Wireless Control using NRF24L01

Today's Project is a wireless control of the Arduino robot car using the NRF24L01 transceiver modules with detailed connections and Circuit Diagrams..
++++++++++++++++++++++++++++++++++++++++
Hardwares Needed
Arduino Uno - bit.ly/35WyYkJ
Arduino Nano - bit.ly/2Lnlvci
NRF24L01 Modules x2 - bit.ly/3bvECvk
L298N Motor Driver - bit.ly/3cwgryc
Joystick Modules - bit.ly/3fP1yc6
Male&Female Jumpers - bit.ly/2Auq3eR
18650 Battery or 7v-9v batteries - bit.ly/2yTYdYP / bit.ly/3fO8GFW
Motor chassis - bit.ly/3cHiFuR
==============================================
✪ PLEASE hit the Subscribe button!!!:
Don't forget to Like & Share & SUBSCRIBE its FREE..Thanks
================================================
Source Codes for both Transmitter and Receiver:
drive.google.c...
RF24 Library:
github.com/tmr...

[@tedo1410]

nice work of art and engineering

[@JustCallMeFeedzCR]

nice editing videos bro

[@aliugur3964]

Great work,good for project

[@furkanfurkan9926]

subscribing now

[@cesimsan9538]

Nice settings bhai

[@azerigaming2715]

Love from India

[@ferdibayir2433]

This video is exactly what I've needed. Thanks a lot ^^

[@mariusjoaca3071]

can't wait for next video bro

[@thangpham9691]

Good Tutorial

[@turkbgm8837]

Great video bro

[@basantsinghtomar3354]

Nrf24lo1 not receiving data due to some code missing

[@Pricings1]

Finally anotherone! much love bro

[@almirbajsini]

Mine doesn't work (and yes i have all the librarys and i checked the whiering i eaven addet 10nf capacitor betwen 3.3v and gnd on the module.) the led blinks on transmitter bit nothing on reciver i switched the nrf24 from reciver and transmitter and same thing hapends what do i do please help.

[@josharduino3241]

Hello Almir, If i understand you correctly, after succesfully uploading the codes, the receiver circuit couldn't communicate with the transmitter circuit and vice versa

[@josharduino3241]

i didn't make use of the capacitor because i didn't see a need to..
anyways please make sure the following statements are Correct
1. TRANSMITTER AND RECEIVER CIRCUIT USES A MINIMUM OF 8V POWER SOURCE
2. CONNECTION BETWEEN ARDUINO AND TRANSCEIVER MODULE IS CORRECT {most especially CE & CSN}
3. CONNECTION BETWEEN THE TRANSCEIVER (nRF24L01) & ARDUINO CORRELATES IN BOTH RECEIVER AND TRANSMITTER AS SHOWN IN CIRCUIT DIAGRAM.
4.CONNECTION BETWEEN BATTERY, L298N & ARDUINO ON THE RECEIVER CIRCUIT IS CORRECT.

[@almirbajsini]

@@josharduino3241 1. I have 8.3v
2. I checked and its correct and i even tried changing to different pins on the code (on both sides ofc)
3.i chacked the whiering like 300 times
4. Its correct a tried using external power source for the nrf24
Its been 3 days sence i started doing this i need it for school project i ned to present, so i dont have lot of time, i dont know what to do,
Bdw i tried different codes for tests and same thing happends transmitter works but reciver doesn't when i open serial connection is sows blenk screen, i only started working with nrf24 and i dont know how to fix it. Please help if you can. Thnx bdw.🙂

[@josharduino3241]

@@almirbajsini contact me on IG @ Josh_Arduino
I'll have to thoroughly go through your project

[@oyunpatla5232]

how did you draw the circuit?

[@josharduino3241]

Used Fritzing Circuits

[@duyanlarduymayanlara5758]

Bro,whats that behind driver

[@josharduino3241]

it's a connection of positive and negative on a vero board

[@Overlord3542]

nice and detailed

[@jackjalabani7333]

Great one bro

[@Ugesh1]

much love

[@Music-si1zp]

♥Josh Arduino

[@jumbo999614]

I'm using Arduino UNO Shield 5.0. How do you connect this NRF with Shield?

[@josharduino3241]

The receiver Cct or the Transmitter Cct?

[@jumbo999614]

@@josharduino3241 The receiver. (www.amazon.com/Makerfire-NRF24L01-Breakout-Regulator-Wireless/dp/B01IK9GCPE)

[@josharduino3241]

Hi Pal Sih kindly confirm if this is how your shield looks like
images.app.goo.gl/zefrYwa11qCU2vXXA

[@jumbo999614]

@@josharduino3241 Yes, I have the exact shield. My Bluetooth is dead. That's why I move on to NRF2401L+ to control it wirelessly.

[@josharduino3241]

okay.. so regarding the NRF2401 module, you can use it without the adapter cause the shield has a 3.3v port
kindly refer to the link i sent earlier it's a well labeled diagram of the 5.0 shield.

[@scourageliquidater1590]

only my left tyre moves ..why bro

[@josharduino3241]

Check the connection between the Nrf24L01 module and the arduino, confirm if you've got the right pin connections

[@alfredodeatras5785]

Having the same problem right now

[@invqder6097]

how to connect trans and receiver

[@josharduino3241]

Immediately the transmitter and receiver are connected to power, they both would get connected automatically

[@ecemyilmaz996]

Bro Irq isnt used right

[@josharduino3241]

Yes please

[@basantsinghtomar3354]

Please help me dear regarding ur receiver code

[@josharduino3241]

The code is correct. Therefore, If you were able to upload the code successfully onto both receiver and transmitter circuits, that means there's something wrong with your connection. kindly go through it thoroughly.

[@basantsinghtomar3354]

@@josharduino3241 connection is all ok fir vhi nhi chl rha kaffi try kar chuka hu

[@basantsinghtomar3354]

How can I contact you please respond

[@josharduino3241]

Instagram @diy_arduinouno

[@basantsinghtomar3354]

@@josharduino3241 Yes

[@neerajkashyap5474]

bro sketch not uploading.what do

[@josharduino3241]

Are all Libraries included?...if not kindly get the library from :github.com/tmrh20/RF24/

[@basantsinghtomar3354]

Bro ur receiver code is not working

[@josharduino3241]

what was the error you received ?

[@basantsinghtomar3354]

@@josharduino3241 failed show ho rha hai bhai aap apna email I'd send kar dijiye mujhe aap se help chaiye plz