A Body Lift Removal Kit

Let's take a look at a body lift removal kit for a 1995.5 Toyota Tacoma pickup.
We offer body lift removal kits for all the vehicles we make body lift kits for. If folks installing body lift kits would only retain the factory hardware they pulled off the vehicle, we wouldn't have to make this kits. But alas, it seems everyone wants to toss the original hardware.
Body lift removal kit information:
- www.4crawler.com/4x4/ForSale/...
For any of our currently supported vehicle, look for the 0" (i.e. stock height) typical kits:
- www.4crawler.com/4x4/ForSale/...
If your vehicle isn't listed let us know the hardware information as requested:
- www.4crawler.com/4x4/ForSale/...
Basically how many bolts, what length, diameter and thread pitch if they go into captive fasteners, and what height lift you currently have and we can usually put together a removal kit for your vehicle.
Subscribe for more content like this
Feel free to rate, comment and share
And as always, thanks for watching
Intro:
Louisiana Fairytale by Austin Rogers
web.archive.org/web/201704022...

[@citreonz]

id like this kit. I have a 95 tacoma with a 3 inch lift too. that only issue is I have 4 spacers on each side, not 6. 1 near radiator, 2 mid truck under cab, and 1 rear of bed. that's a total of 8. any ideas?

[@The4Crawler]

Likely the cab has 6 spacers, 2 under the radiator and 4 under the main part of the cab. Then the bed will have 6 spacers, 2 pair up in front of the wheel well and then a 3rd pair in back.
Several options for the lift removal, we have just the stock length hardware, kit item "D" or if you also want to replace the cab bushings, item "Pc", and/or the bed isolation washers, item "Pb":
www.4crawler.com/4x4/ForSale/ToyotaTacoma.shtml#FullKit1

[@Swanstar665]

I know this is an old video but what was the price to the customer? I wanted to do the same to a 2007 Hilux and Toyota wanted an arm and a leg........

[@The4Crawler]

If that model year is still similar to the earlier pickup models, then see below:
www.4crawler.com/4x4/ForSale/ToyotaPickupBodyLift.shtml#PickupLifts
For the regular pickups, there are 6 cab and 8 bed/tray mounts. For the double cab Hilux models, there are are apparently 8 cab mounts. See the pricing in the appropriate table under the 0" or stock height column.
As that's a later model year than we've dealt with before, might be worth checking the dimensions of the cab and bed/tray mounting bolts:
www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml#FAQ5
Just measure what you have and let us know how tall a body lift is on the vehicle and we can work back to the stock hardware size.

[@thebassgeneratorinc229]

I have a 07 tahoe LTZ 2 wheel drive with a 2" body lift that I wish to remove for a stock look.
What do you guys offer to do such a task?

[@The4Crawler]

If you can let us know the number and dimensions of the bolts (length, diameter and thread pitch if they go into captive fasteners) with the current kit we may be able to come up with a stock height hardware kit:
www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml#FAQ5
Or check with your local dealer parts counter, they may have stock cab and bed hardware available.

[@jesusalvarez7698]

I have a 1995 Tacoma with a 3” body lift i want to go back stock can you send me a link with the full kit removal having a hard time purchasing. Im ready to buy.

[@The4Crawler]

Sure, that would be the 0" (stock height) kit D for the original length hardware:
www.4crawler.com/4x4/ForSale/ToyotaTacoma.shtml#FullKit1
Shipping and ordering options:
www.4crawler.com/4x4/ForSale/ToyotaTacoma.shtml#NOTES
and contact information on the web page if you need ordering assistance.

[@CaptainNico350]

Hi, I know.this is an old upload but I am hoping you get this message. I am looking for a body lift removal kit for my 1997 f250 extended cab 4x4. Any luck?

[@The4Crawler]

Sure, we don't have the component information for that specific vehicle. But if you can get us the bolt lengths and diameters along with the height of the existing body lift, we should be able to put together a kit for that:
www.4crawler.com/4x4/ForSale/BodyLiftKit.shtml#FAQ5

[@CaptainNico350]

Awesome. I would appreciate that. Hoe much would it cost do you think?

[@The4Crawler]

@@CaptainNico350 Hard to say without knowing how many or what size bolts will be required. Our Tacoma and Tundra kits range from $40 - $70 for the stock height hardware kits:
www.4crawler.com/4x4/ForSale/ToyotaTacoma.shtml#Tundra