SolidWorks Tutorial # 355: Hydraulic Gear Pump (Hydraulic Pump 3)
HTML-код
- Опубликовано: 20 авг 2024
- SolidWorks Tutorial # 355: Hydraulic Gear Pump, (Hydraulic Pump 3)
Hydraulic Gear Pump 1 :► • SolidWorks Tutorial #2...
Hydraulic Gear Pump 2 :► • SolidWorks G Tutorial ...
/ @sw-tcnet
►SolidWorks Learning course (185+lectures):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Become a member in the channel here: / @sw-tcnet
►►►SUBSCRIBE ?!◄◄◄
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►Facebook:► / solidworks.tutorial.net
#SolidWorks #3D #Tutorial #SolidWorks_Tutorial
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!
Hello
The parameters on the thread (1:53:30) are wrong. You shouldn't use tap & extruded thread. You should use metric die & cut thread. This giving perfect results!!! When you want to design a thread M10 the actual size is a little smaller after thread, something like 9.8 mm. In general in manufacturing operations about thread we remove material we don't ad.... My recommendation I think is giving more nice illustrated results.
Great tutorial, Thank you!!!
Haba ng harang eh congrats po sayo madam enjoy sa pag vlog ingat lagi
I'm loving the old-school 80s movie music🤣🤣👍🏽👍🏽
Schmidt is a very good company out here in Colorado. They tend to get a lot of the paving contracts by cities and counties. Martin Marietta is the same way. Kewit and Wildcat construction get the majority of Cdot's contracts as well.
Great work! Drawings thought, would be magnificent.
Wonderful designs.
If anyone will need any hydraulic gear pumps, please feel free to get back to us. Thanks and have a great day. :- )
@@simonballon409 i would need the blueprints please! its for an engineering assignment
@@josevieira5700 ? What?
អគុណបង
thanks for sharing the tutorial
Hi, I'm new here (self-taught), and right now I'm reverse engineering a hydraulic pump very similar to this one. my pump has one inlet and two outlets. and for my tractor. the problem is that I don't know what tolerances I have to give. Can you get me information where they can tell you what tolerances to give to the various parts of the hydraulic pump?
Thanks carlos from portugal.
great work
superb work
Hi, I think the drain path on the bushing needs to point to the low pressure input port .. not high pressure output port
Thank you
👍👍👍We can also provide hydraulic gear pumps
Is it my imagination, but did the author forget the dowel pin hole on one end plate? Seem the drive side plate has a dowel pin hole, but not the non drive side.
another great tutorial. thank you :)
Nice drawing
Great job, congratulations and thank you very much sir.
hello, can you share the technical drawing of the pump, please?
Nice video, thanks :)
Tamasak done host dikit na rin kita from ka bisaya
Please upload a tutorial on fixed geometry thrust pad bearing.
Are you know about solidwork...i need draftman for my company ...from faridabad
@@DEEPACHAUHAN1196 no. I'm learning for my PhD work.
@@santwanamishra3585 ok ji👍😊
Hi if you have time please make another surfacing video. Maybe Nunchuck controller
Thank you so much
Super
Is there any way to get the drawings for this model?
how can i do soft move on part like this.
hello, excellent design, you will have a design for a 3-body dry sump pump
I am also self taught 😌
fire 🔥🔥🔥
Hi solidworks tutorial do you have a assemble that have 50 parts? please I need your help🙏
Cool 👍👍👍👍
What software is this
Hello! Where can I see the drawings of these parts ?
you didn't put holes for pins on the end cover.
Please send 2d drawings of project
nice
Ka bisaya tv vlog her
Hanzhen harmonic gear , robot gear , joint acurator , over 30 years experience
Do you have a drawing? I design by Inventor so the drawing is more suitable for me
subscribe first
@@Sw-tcNet i have subscribed
thanks for subscribing out channel. unfortunately we are not providing any files yet.
Filmovi i sa strane svojim radom prijateljima i u petak navečer na u j juhu s od njih je bilo i na kraju je ipak uspjela u petak navečer na poslu pa se tako i za tebg u tekućem računu
Maybe it's a good idea to put the names of the parts your making so I get an idea of what your doing
is shown on upper bar
Can you supply the drawing as pdf. It will greatly help
I mean like front view top view sectional view auxiliarry view. I appreciate your hard work, so the pdf will be a bonus
Good time
Please visit my channel
Sir denitioin p30 close loop pump ka ka video
Pl inform me
I am a service provider for hydraulics
Where's the part playlist... Like:
Part 1 - ruclips.net/video/QUEnrZFC_tI/видео.htmlsi=S_cxqrl-hO2GrJ5M&t=253
Part 2 -
... and the CAD drawing
Asombroso
#Engineering102
#engineering102 like tosport
Muy lento diseñar con este software, en la mitad del tiempo se realiza con autodesk y mejor