I replace 1 sensor with mx sensor b3cause 1 was no good. I did the copy and activation for it. But light still stay on, I try to stationary relearn and it fail on me. The other 3 is original and not mx sensor. Update: I'm so dumb, I didnt properly read the instruxtion just saw instruction 1 and 2. It is working now. Yugioh player he like
I have a small problem I have a small scanner TS 501 that can not program the sensor 315 + 433 = 1 that I ordered from China each time I start programming it writes me error code
I lost one of my old sensors that I damaged when I dismounted the tire , I put the new tire on anyways but can I program the replacement sensor without having the old sensor
You have the option to read the sensor ID's from the OBD2 port to "Clone" the sensor. The other option is to just auto create a sensor and then do the relearn process
If it is already installed you should be able to just select the year make and model of the vehicle and ready like normal. Once a sensor is programmed any TPMS tool should be able to read it.
@@duramax78 Autel makes very reasonably priced programmable sensors that are a perfect match to the MaxiTPMS. I wasted too many dollars buying cheap junk. First Winter, battery fails, not programmable, not pre-programmed properly. Why waste too much money mounting the junk sensors only to find out you are stuck with a turd?
@@FlashPerformance Even aftermarket sensors like the TMP93A from Standard? That's the one I hope to clone from my existing ID. (Autel only mentions their own "MX" sensors, so it's confusing.)
@@VideoNOLA When it comes to clone, it is on the Autel MX sensor. The TMP93A you mention is specific to Subaru. The Autel tool can do the relearn process, but not clone it.
Autel TPMS tools can only clone and program Autel MX sensors. However the Autel TPMS tools and read and relearn any information ready sensor and any pre-programmed sensor.
if the TPMS sensor is totally dead and OBD method dose not support , should we use "manual input"? Do i need relearn procedure for "manual input"?
Always relearn all sensors after any changes.
I replace 1 sensor with mx sensor b3cause 1 was no good. I did the copy and activation for it. But light still stay on, I try to stationary relearn and it fail on me. The other 3 is original and not mx sensor.
Update: I'm so dumb, I didnt properly read the instruxtion just saw instruction 1 and 2. It is working now. Yugioh player he like
thanks sir pls more videos for maxitpms programming
I have a small problem I have a small scanner TS 501 that can not program the sensor 315 + 433 = 1 that I ordered from China each time I start programming it writes me error code
Make sure the tool is updated, if that doesn't help I recommend contacting the support team support@autel.com
Is it an Autel MX sensor,Autel TS501 can only program a Autel MX sensor.
I lost one of my old sensors that I damaged when I dismounted the tire , I put the new tire on anyways but can I program the replacement sensor without having the old sensor
You have the option to read the sensor ID's from the OBD2 port to "Clone" the sensor. The other option is to just auto create a sensor and then do the relearn process
Well nowni know why my tool ain't working... I'm putting it in the day tire and trying to have it on the car read to go.... smh
How do you read aftermarket tpms sensors installed already? Tia.
If it is already installed you should be able to just select the year make and model of the vehicle and ready like normal. Once a sensor is programmed any TPMS tool should be able to read it.
@@FlashPerformance weird I had to go and try 2 of them about 10 x, thanks for helping, cheers.
@@duramax78 Autel makes very reasonably priced programmable sensors that are a perfect match to the MaxiTPMS. I wasted too many dollars buying cheap junk. First Winter, battery fails, not programmable, not pre-programmed properly. Why waste too much money mounting the junk sensors only to find out you are stuck with a turd?
شكراً
Any help how to register my new tools
ruclips.net/video/PlDqGB2ixKk/видео.html
This reading any Sensor or have some Special sensor
The Autel TPMS tools will read and relearn any sensor that is already programmed.
@@FlashPerformance ok and I have another problem is not read my old sensor and i dont found ID for a sensor
@@FlashPerformance Even aftermarket sensors like the TMP93A from Standard? That's the one I hope to clone from my existing ID. (Autel only mentions their own "MX" sensors, so it's confusing.)
@@VideoNOLA When it comes to clone, it is on the Autel MX sensor. The TMP93A you mention is specific to Subaru. The Autel tool can do the relearn process, but not clone it.
@@FlashPerformance will it program any sensor my shop only supplies customers with dill sensors to replace dead sensors
why i need copy for what i just need the light on dash broad is gone this is not thing to help i'm return the product
what is the difference between TS601 and TS508?
The TS608 adds diagnostics, you can scan for engine codes. The TS508 is only TPMS
os sensores tem que ser Autel ou podem codificar outros ?
Autel TPMS tools can only clone and program Autel MX sensors. However the Autel TPMS tools and read and relearn any information ready sensor and any pre-programmed sensor.
Thank you
@@FlashPerformance that why you need to keep your product for a souvenir .because customer will returning item back to you dumb company
Can this scam read engine codes?
The TS508 can not, however there are a few options from Autel that can. Check out the TS601 amzn.to/3jNVw08
Need pay year pay year pay year pay year actualization?????? 😡
Free updates for the life of the tool, unlimited activations.
This tool is such crap. HOW DO YOU GET THE TPMS LIGHT TO TURN OUT? This video is as half baked as the tool is.