Hey Richard, thanks so much for uploading videos and pushing this project. This project inspired me to get a ratrig with a carrot feeder system. To start me off and one day to become a tool changer. Currently working on the firmware of my printer and expecting first prints by the end of the week.
No plans for anything more specific than the info on the project page at the moment - www.printables.com/model/137147-ratrig-vcore-3-tool-changer I have published my Klipper configuration to GitHub and I'm on the RatRig Discord. I have a frame extended by about 120mm in the Y direction, with longer Y rails which allows the depth needed to keep all the print area.
the belts on the cable bundle is a testament to the diyness of this creation. i love it
Hey Richard, thanks so much for uploading videos and pushing this project. This project inspired me to get a ratrig with a carrot feeder system. To start me off and one day to become a tool changer. Currently working on the firmware of my printer and expecting first prints by the end of the week.
Great to hear its inspired you! There are a few people already using ERCF systems and a dedicated MMU channel on the discord server.
are you planning to release a build guide for this at some point? Do you loose much of the y travel direction with this mod?
No plans for anything more specific than the info on the project page at the moment - www.printables.com/model/137147-ratrig-vcore-3-tool-changer
I have published my Klipper configuration to GitHub and I'm on the RatRig Discord. I have a frame extended by about 120mm in the Y direction, with longer Y rails which allows the depth needed to keep all the print area.