Watch Next 😎👇 🌟 How to Create Split Letter Monogram Designs in Cricut Design Space ruclips.net/video/oyO4zZf-ny0/видео.html 🔥 How to Create Knockout Designs in Cricut Design Space ruclips.net/video/605HlLEFInU/видео.html 🖋 How to Use a Handwritten Note or Recipe in Cricut Design Space ruclips.net/video/PYCLjWm39vw/видео.html
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Thank you very much for this I have been trying to figure out for weeks how people do it. Saw your video by accident have now subscribed to your channel
Can't wait to see the print then cut with HTV...quick question though - what kind of printer do you need for that? I have color laser...Have been holding off on buying an inkjet (or asking Santa for one ;) )
Hey Mel! I use an inkjet printer, just one I pickup up off Amazon (HP 3700). Most printable iron-on sheets I've seen are for inkjet printers, but you may be able to find ones for laser? I'm not 100% sure to be honest. Hope this helps! ---Becky
@@DesignBundles Thank you, Becky! I think I will watch videos and get ideas for what I would use the inkjet for before I buy another printer...between my color laser, Cricut and minc, I've got quite a few machines in my home office, lol. Happy holidays! 🙂
HELP AWESOME PROJECT Could you put in step-by-step on how are you trim I am new and you just blew right through it I think a lot of people are in the same boat thank you
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hey there! Thanks so much for your his video! Would you know why my slice is grayed out ?! It did one photo but now with the second one it won’t allow me to sliced
Hey Nicole! I would personally put the shirt on and then use masking tape to tape off the area in a mirror. Pockets are typically around 3.5" - 4" for me, but the tape will help tremendously! Hope this helps! ---Becky
Great video but for beginners it would be very confusing doing all the pictures the way you did maybe if you did one letter at a time so that it’s easier to visualize but I’m definitely going to be making this
Hey there, no worries, we have a beginner video to help better explain using the slice tool. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
Since you are slicing multiple pictures onto one letter after you slice the first one do you need to weld it or can you go ahead and then do the next picture and slice will it consider is being only two pieces since you can only slice two things at a time
I love our work but it was to fast on how to slice and where do you find that slice tool? Could not get to the picture and letters to go together to try and slice.
Hey Barbara, we have a better beginner video for using the slice tool, I'll link it for you down below. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
Hey Becky. On design bundles.net they have on every third Wednesday for one hour where you could buy bundles for a dollar or two or something like that do you know what time they do that I live in Richmond California
Like the idea, but done way to fast! 😕 How did you download the pics to “images”? Could you consider doing another for beginners, with step by step instructions? Thanks, love your channel!
Hey Wendy! Great news, we do have a video on using the Slice tool, which is the basis of this video. Give it a browse and I think it will give you some good information on this project. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
hi thanks for the video, any chance you can give me the link to cricut design space! i´m very new on all of this, i have a macbook air where i want to work on. My intention is to print and frame them.
Hi there! Here is the direct link to their apps section: cricut.com/en-us/apps Let us know if you have any questions about getting started with Cricut. We are here if you need us!
Please explain how you sliced it. My overlapping photos won’t slice. It’ll slice one but not the other. I know you can only slice two at a time. In your video you did so fast I couldn’t see exactly how you are doing it. Thanks
Can you go back on the video back to the time at 3:15 where you say once you get done selecting then slice. You made your video too fast when you did that I’m trying to figure out how can I slice the pictures without moving them. the slice is won’t highlighted .can you please help me I want to do a picture so bad thanks
Hey Christina! If you click on the mat (in a blank area) and hold down your mouse key, you can drag it to create a selection box. Anything you can touch that box with will be selected. Select two objects (the text and one photo) then click slice at the bottom right. Hope this helps! ---Becky
@@DesignBundles thank you so much for getting back to me. Really appreciate it. If I was wanting to put this into a frame what would I do? Print onto card or you a printable vynil then attach it to the backing card? I hope you understand what I mean lol
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I wanna do what you did with the word mom you put your kids pictures in it well I have a dog that just passed away a month ago I had him for 18 years this is his picture on my page.. I really want to do what you did and put all his pictures in the word mom. But I can’t seem to get the pictures to slice like you did on your video. You make your video go fast when you are placing your pics on the design space.. So I don’t know if you have the same software update that I have all I know it’s just not working right please help me I need help Becky.
When using the word mom do you ungroup the word mom or is the word mom grouped. You did your video so fast in fast mode that is hard to see how you you did it. What upgrade program and Cricut are you using are you using the latest version. 6.150
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hi it's me again I was trying to slice in half a image I designed with a park scene I put a tree a bench a bear n some sky then I grouped it n flatten it for a print n cut and I can't slice it in half how are we suppose to design if we can't even slice it how we want it ? Thank u need help
Wow! I tried this and it is harder than it looks. The slice is not highlighted when two or more is in a letter. Is something not mention in this tutorial 🤔
I'm having a problem with the slicing. I'm able to slice one photo but after that I just can't seem to get it done correctly. I have all the photos on the letters where I want them but again only able to slice one photo. When I try to slice another photo the "slice button" is not highlighted. Please help since I would like to have this done to take as a gift to my niece who gave me my Cricut Maker.
We have a better beginner tutorial on using the Slice feature, I think it will help you in this situation. There are a few quirks with slicing, such as making sure you have only selected two shapes, etc. Sometimes photos are overlapping and we can't see. That is my first thought for what you are describing. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
Can you please explain in detail, how you are slicing the photos? I am slicing pieces of the photo that shouldn't be sliced. I followed you, up until you sped up, at the most important part... the slicing. I read other comments where you tried to explain, but it's not working for all the photos. I am doing something wrong, and I can't figure it out. Can you show what you are doing with the slicing?
Hey MsTee. I have another video that gives you more info on slicing, I'll link it here for you. This one should have the information that you need. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
Is there any way you could do a new video in slower motion when you slice the photos and explain as you go. You went so fast I couldn’t tell how you got the word and photo selected to slice.😏
Hi Deborah! Our apologies, if you are having trouble on a certain step, please send an email into mail@designbundles.net and we would be happy to help!
Hey there so i did this but used a dog as an outline and got to the print part and for some reason it won't print the images. Im not sure what im doing wrong but I'm hoping you could help. Its not a printer or ink issue
Hey there! Can you give me a little more information about what is happening? Is the software not sending the design to the printer? Is the printer ejecting a blank page? I'd love to help you troubleshoot. ---Becky
@@DesignBundles sure thing , basically when i go to print it, instead of printing the whole picture it just does a few little black pieces that i used to fill in a couple gaps that images wouldn't fit in. Someone suggested that i print as a pdf and open it up to see what it shows and it shows the little bits that actually print but the pictures that shape the dog don't show at all or wont print
Hello there! It will depend what you are wanting to use the image for! 😊 If you are wanting to frame it you could print it on your everyday printer on photo paper! 😊
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Mine keep coming through as double photos when I click make it 😩😩 so on the letters that I’ve sliced photos into that is showing two of the same photo 😩
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
What am I doing wrong? I can slice the corner of my letter mom but that’s it. I’m not able to slice my pictures in between, no matter what I do. Even if I click on the side panel. Help!
Love this idea but got confused on how you are slicing everything. Like maybe if you just did a couple examples slowly explaining each step and then sped up the rest. I love this idea though.
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hey Christina! We have put together a more comprehensive video on slicing that should help. I'll link it here for you. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
It would be when teaching through a process, to go slower for those that are not familiar with the technique. Although you know what you are doing, the pace you are going , you may consider going slower for those that watch your video can see exactly what you are doing and the buttons you Are clicking can be noticeable. Thanks for showing your craftsmanship. It was fun to see the outcome, but it wasn’t very educational.
Hi Jacqueline! Our apologies for any confusion. You can alway slow down the speed of the video by adjusting the playback in the settings option (the gear under the video). - Dawn
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hello, I really like your video but you lost me when you said you were going to start slicing, I know how to slice but you were doing it very fast and can’t get my pictures to fit on the letters.
Hello again MsTee, we have a video specifically on slicing that will help you with that area of this project. We made it as a prequel after this video. I'll link it for you below. Hope this helps! ---Becky ruclips.net/video/6vcicIPF2RM/видео.html
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
![KSI - Thick Of It (feat. Trippie Redd) [Official Lyric Video]](http://i.ytimg.com/vi/tXEPbotEjZE/mqdefault.jpg)
Watch Next 😎👇
🌟 How to Create Split Letter Monogram Designs in Cricut Design Space
ruclips.net/video/oyO4zZf-ny0/видео.html
🔥 How to Create Knockout Designs in Cricut Design Space
ruclips.net/video/605HlLEFInU/видео.html
🖋 How to Use a Handwritten Note or Recipe in Cricut Design Space
ruclips.net/video/PYCLjWm39vw/видео.html
To fast for the beginner.
Very good idea. Agree, a slower redo would be much appreciated for the newbies. Thank you!
You're my hero, this is so much easier than I was expecting! Thank you 💙
Awesome! Video was fast for me, lol I couldn't figure out how you were slicing
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Thank you Becky, I will start small first, thx
Same here, but what I did was to slow down the video, go to your settings and pick the speed. This way you can see what her mouse is moving.
So cool! Can't wait for my cricut to arrive so I can play with all of these techniques!
Thank you for doing The Cricut projects!!
this video helped me out a lot I didn't know how to do until I cam across this thank you so much for shareing this video
賢いアイデア！よくやった！
Clever idea! Great job!
Oh my... Great video, thanks for sharing
your smile is contagious! lol thanks for the video!
You're welcome! Happy to help!
Love the tutorial! I'm trying it now but I'm struggling with arrangement lol
Wow, this is really a great idea! Makes a nice gift as well!
Awesome. And the video was done great. Not too long at all. Thank you.
Really appreciate the Cricut Design Space videos, thanks!
Thank you very much for this I have been trying to figure out for weeks how people do it. Saw your video by accident have now subscribed to your channel
Awesome job! Putting pictures on tennis shoes is Awesome also Thanks for sharing this great tutorial video
Becky, I've been waiting for this since you did it on the Silhouette! Thank you!!!
Awesome tutorial, easy to follow. Thank you!
Glad it was helpful!😊
Just saw your video. I can't wait to try it
Hope you like it!
Omg I love this!!!!
this was great!!! thank you so much!!
How do you save or share if you want to print out as a DTF? like as a pDF or jpg file
Good idea!! TFI (inspiring)...🎄🎁🤶😘❄️⛄️🪅🥂
Looks great.
Great project!
Can't wait to see the print then cut with HTV...quick question though - what kind of printer do you need for that? I have color laser...Have been holding off on buying an inkjet (or asking Santa for one ;) )
Hey Mel! I use an inkjet printer, just one I pickup up off Amazon (HP 3700). Most printable iron-on sheets I've seen are for inkjet printers, but you may be able to find ones for laser? I'm not 100% sure to be honest. Hope this helps! ---Becky
@@DesignBundles Thank you, Becky! I think I will watch videos and get ideas for what I would use the inkjet for before I buy another printer...between my color laser, Cricut and minc, I've got quite a few machines in my home office, lol. Happy holidays! 🙂
Awesome!!
HELP AWESOME PROJECT
Could you put in step-by-step on how are you trim I am new and you just blew right through it I think a lot of people are in the same boat thank you
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
This what i'm trying to find out how to get rid of the excess
sweet, but it was so fast that it wasnt clear how you did it....like how to use slice?
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hey there! Thanks so much for your his video! Would you know why my slice is grayed out ?! It did one photo but now with the second one it won’t allow me to sliced
I couldn’t see how to slice. Went way too fast
Nice and simple, how would I size a decal on a long-sleeve shirt with a left chest pocket on it?
Hey Nicole! I would personally put the shirt on and then use masking tape to tape off the area in a mirror. Pockets are typically around 3.5" - 4" for me, but the tape will help tremendously! Hope this helps! ---Becky
Love it
I ve never seen it this way but I didn’t quite catch how you did the slice part and leave all picture intact
Will this work with my iPad? My computer of course is not working now that I have all my stuff
How are the images transferred to vinyl, cardstock etc?
You can use print and cut to get the image on vinyl or cardstock. 😊
Great video but for beginners it would be very confusing doing all the pictures the way you did maybe if you did one letter at a time so that it’s easier to visualize but I’m definitely going to be making this
Hey there, no worries, we have a beginner video to help better explain using the slice tool. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
@@DesignBundles I just want to say, you are amazing. i love all your videos
Thank you
Since you are slicing multiple pictures onto one letter after you slice the first one do you need to weld it or can you go ahead and then do the next picture and slice will it consider is being only two pieces since you can only slice two things at a time
I don't group them together until I'm finished with all the slicing. Hope this helps! ---Becky
I love our work but it was to fast on how to slice and where do you find that slice tool? Could not get to the picture and letters to go together to try and slice.
Hey Barbara, we have a better beginner video for using the slice tool, I'll link it for you down below. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
Hey Becky. On design bundles.net they have on every third Wednesday for one hour where you could buy bundles for a dollar or two or something like that do you know what time they do that I live in Richmond California
Hey Christina! It looks like they go live at 11AM CDT! Hope this helps! ---Becky
Like the idea, but done way to fast! 😕 How did you download the pics to “images”? Could you consider doing another for beginners, with step by step instructions? Thanks, love your channel!
Hey Wendy! Great news, we do have a video on using the Slice tool, which is the basis of this video. Give it a browse and I think it will give you some good information on this project. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
Hello is there a way I can email you. I’m having a really hard time trying to fthis our
hi thanks for the video, any chance you can give me the link to cricut design space! i´m very new on all of this, i have a macbook air where i want to work on. My intention is to print and frame them.
Hi there! Here is the direct link to their apps section: cricut.com/en-us/apps Let us know if you have any questions about getting started with Cricut. We are here if you need us!
Please explain how you sliced it. My overlapping photos won’t slice. It’ll slice one but not the other. I know you can only slice two at a time. In your video you did so fast I couldn’t see exactly how you are doing it. Thanks
What front are you using
Can you go back on the video back to the time at 3:15 where you say once you get done selecting then slice. You made your video too fast when you did that I’m trying to figure out how can I slice the pictures without moving them. the slice is won’t highlighted .can you please help me I want to do a picture so bad thanks
Hey Christina! If you click on the mat (in a blank area) and hold down your mouse key, you can drag it to create a selection box. Anything you can touch that box with will be selected. Select two objects (the text and one photo) then click slice at the bottom right. Hope this helps! ---Becky
Hi I'm working on a project with my cricut similar to the one in this tutorial but have a few questions??
I'm happy to help :)
@@DesignBundles thank you so much for getting back to me. Really appreciate it.
If I was wanting to put this into a frame what would I do? Print onto card or you a printable vynil then attach it to the backing card? I hope you understand what I mean lol
How did you pick each picture and the part of the letter that it’s in?? That’s confusing!
How did you send your photos to design space ? Thank you
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I wanna do what you did with the word mom you put your kids pictures in it well I have a dog that just passed away a month ago I had him for 18 years this is his picture on my page.. I really want to do what you did and put all his pictures in the word mom. But I can’t seem to get the pictures to slice like you did on your video. You make your video go fast when you are placing your pics on the design space.. So I don’t know if you have the same software update that I have all I know it’s just not working right please help me I need help Becky.
When using the word mom do you ungroup the word mom or is the word mom grouped. You did your video so fast in fast mode that is hard to see how you you did it. What upgrade program and Cricut are you using are you using the latest version. 6.150
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
Hi it's me again I was trying to slice in half a image I designed with a park scene I put a tree a bench a bear n some sky then I grouped it n flatten it for a print n cut and I can't slice it in half how are we suppose to design if we can't even slice it how we want it ? Thank u need help
Are you getting an error message when trying to slice it?
Wow! I tried this and it is harder than it looks. The slice is not highlighted when two or more is in a letter. Is something not mention in this tutorial 🤔
It does take some getting used to! Thank you very much for your feedback! ☃️
Can you do this on a silhouette cameo 4?
Hey Judy! We have that for you! I'll link the video below, hope it helps! ---Becky
ruclips.net/video/SGhntMVAd-0/видео.html
I'm having a problem with the slicing. I'm able to slice one photo but after that I just can't seem to get it done correctly. I have all the photos on the letters where I want them but again only able to slice one photo. When I try to slice another photo the "slice button" is not highlighted. Please help since I would like to have this done to take as a gift to my niece who gave me my Cricut Maker.
We have a better beginner tutorial on using the Slice feature, I think it will help you in this situation. There are a few quirks with slicing, such as making sure you have only selected two shapes, etc. Sometimes photos are overlapping and we can't see. That is my first thought for what you are describing. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
Can you please explain in detail, how you are slicing the photos? I am slicing pieces of the photo that shouldn't be sliced. I followed you, up until you sped up, at the most important part... the slicing. I read other comments where you tried to explain, but it's not working for all the photos. I am doing something wrong, and I can't figure it out. Can you show what you are doing with the slicing?
Hey MsTee. I have another video that gives you more info on slicing, I'll link it here for you. This one should have the information that you need. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
Which font did you use
Uncle Grump by Missy Meyer 😃
Is there any way you could do a new video in slower motion when you slice the photos and explain as you go. You went so fast I couldn’t tell how you got the word and photo selected to slice.😏
Hi Deborah! Our apologies, if you are having trouble on a certain step, please send an email into mail@designbundles.net and we would be happy to help!
Could this be used as a sublimation file?
Yes, absolutely! This works great for sublimation! ---Becky
Hey there so i did this but used a dog as an outline and got to the print part and for some reason it won't print the images. Im not sure what im doing wrong but I'm hoping you could help. Its not a printer or ink issue
Hey there! Can you give me a little more information about what is happening? Is the software not sending the design to the printer? Is the printer ejecting a blank page? I'd love to help you troubleshoot. ---Becky
@@DesignBundles sure thing , basically when i go to print it, instead of printing the whole picture it just does a few little black pieces that i used to fill in a couple gaps that images wouldn't fit in. Someone suggested that i print as a pdf and open it up to see what it shows and it shows the little bits that actually print but the pictures that shape the dog don't show at all or wont print
I will like to know what kind of machine I need to print this
Hello there!
It will depend what you are wanting to use the image for! 😊
If you are wanting to frame it you could print it on your everyday printer on photo paper! 😊
@@DesignBundles and everyday printer will it work to make a tshirt?
I'm trying this. I followed all your steps but for some reason some other pictures are cutting out separately. ,😭
Are the layers attached or welded properly?
Love the idea but way too fast, I need it explained a little clearer.
Can you show how on a silhoutte please?
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
@@angeladodson9845 We do have this for Silhouette! Hope this helps! ---Becky
ruclips.net/video/SGhntMVAd-0/видео.html
It don't give me slice option, it's that only worth a subscription?@DesignBundles
Mine keep coming through as double photos when I click make it 😩😩 so on the letters that I’ve sliced photos into that is showing two of the same photo 😩
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
Where can I find UNCLE GRUMP. FONT AT
Hey Christina, it's from FontBundles.net, the link should be in the description for you. Hope this helps! ---Becky
What am I doing wrong? I can slice the corner of my letter mom but that’s it. I’m not able to slice my pictures in between, no matter what I do. Even if I click on the side panel. Help!
Hi Gloria! You can only slice 2 items at a time, so double check that you aren't highlighting more than 2 items.
Do u ungrounded the word mom
Love this idea but got confused on how you are slicing everything. Like maybe if you just did a couple examples slowly explaining each step and then sped up the rest. I love this idea though.
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
What font is that please?
It's called Uncle Grump and it's available from FontBundles.net. The link is in the video description. Hope this helps! ---Becky
I’m no able to slice on all my pictures don know how it really works
Can u please do another video that is not speeded up..
Hey Christina! We have put together a more comprehensive video on slicing that should help. I'll link it here for you. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
How are u slicing. Need more explanation
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
It would be when teaching through a process, to go slower for those that are not familiar with the technique. Although you know what you are doing, the pace you are going , you may consider going slower for those that watch your video can see exactly what you are doing and the buttons you Are clicking can be noticeable. Thanks for showing your craftsmanship. It was fun to see the outcome, but it wasn’t very educational.
Hi Jacqueline! Our apologies for any confusion. You can alway slow down the speed of the video by adjusting the playback in the settings option (the gear under the video). - Dawn
I guess I am just slow. Could you please slow the next one down a little or even alot? Thank you.
I put all the pictures in the word mom but I can’t get them to slice like you did
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky
I'm with the rest of everyone else a slower one would be nice didn't even see how you were doing it
Hello, I really like your video but you lost me when you said you were going to start slicing, I know how to slice but you were doing it very fast and can’t get my pictures to fit on the letters.
What format was your photos ?
Becky I need your help PLEASE...........
I wish you would have done the slicing a little slower or at least show the steps how you sliced the pics.
Hello again MsTee, we have a video specifically on slicing that will help you with that area of this project. We made it as a prequel after this video. I'll link it for you below. Hope this helps! ---Becky
ruclips.net/video/6vcicIPF2RM/видео.html
Where’s part 2
Which next steps are you looking for? - Brittany
In group the word mom?
You can leave them grouped or not, it's up to you. It won't impact the design either way. Hope this helps! ---Becky
Great video but way too fast for me sorry
Very fast it only allowed me to slice once 😏
can not "slice" Help
Hi Nicki! You may have more than 2 objects selected. Can you try only 2 objects and let us know if that helps? - Dawn
@@DesignBundles did that and it worked! Thanks for answering.....
Great idea, but unfortunately the video was tooooooooo fast. Couldn’t really follow what you were doing😕
Hey! Sorry if the video was fast, I'll work on a follow-up video that will go over the basics of slicing. I should have worked on that one first, sorry! But basically, you just select one photo and the letters, then click Slice. You can delete the parts you don't need, then move on to the next photo. Start small until you get use to the process. It won't work on more than two objects at a time, so that's why I did the speed-up, it takes a long time to work your way through and I didn't want to bore you guys! Hope this helps! ---Becky