Ryobi One+ 18V Lithium Battery Fix
HTML-код
- Опубликовано: 13 авг 2020
- #davesshop #newsubcribers
Ryobi One+ 18V Lithium Battery Fix
This video is step by step instructions to repair the Ryobi 18 volt lithium battery that will not charge.
Here's a link to the Torx security bit you will need • Ryobi 40v Brushless Wh...
Here's a link to the Test Leads with Alligator clips amzn.to/3LUzUgw
My Amazon Store Front
www.amazon.com/shop/davesshop
Go to: Ryobitools.com
Click on the service and support and call 1.800.525.2579
CUSTOMER SERVICE HOURS:
MON - FRI: 9am - 6pm (EST)
Want to grow your RUclips channel - Go to Tubebuddy just click on the link below
www.Tubebuddy.com/davesshop
Follow me on Social Media
/ davesshop
/ davesshop2
/ davesshop2
RYOBI 18-Volt ONE+ Cordless Power Spreader Model P2402 Review 2020
• RYOBI 18-Volt ONE+ Cor...
Ryobi 18-Volt ONE+ Cordless Compact Workshop Blower Model P755 vs a Broom 2020
• Ryobi 18-Volt ONE+ Cor...
Ryobi Universal Miter Saw Stand Unboxing and Review
• Ryobi Universal Miter ...
Wen 18-Gauge 3/8 in. to 2 in. Pneumatic Brad Nailer Model 61721 review
• Wen 18-Gauge 3/8 in. t...
Milwaukee Polarized Safety Glasses/Home Depot Seeds Review
• Milwaukee Polarized Sa...
~-~~-~~~-~~-~
Please watch: "Ryobi's New Chemical Sprayer 2 gallon"
• Ryobi's New Chemical S...
~-~~-~~~-~~-~ - Хобби
I called Ryobi and they were able to look up the date of manufacture by the S/N. If you lost the receipt or got it as a gift they will replace the battery as long as it's within 3 years of the manufacture date. Also, thanks for the info in this video. I had two batteries and didn't know which I bought when. It turns out the "bad" one is 5 years old. Your trick worked for me :)
Great demonstration!
Thank you, Dave. It is so nice of you to show us how to do this.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/7LkqCVPEUTk/видео.html
Works perfectly - your directions are very easy to follow and the result is outstanding. Thank-you!
Hi Jim, I am glad the video was helpful. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
This mo
THANK YOU/ This worked like a charm for me. And it was much easier than some other YT videos I watched.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos
Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Great! Simple and clear. 👍
Hi Roger, Thanks for the kind words and thank you for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/SzHd0N0jebM/видео.html
I will give this a go tomorrow. Thanks for the tip old sport, greetings from Essex UK.
Hi Ian, I have used this method on several of my Ryobi batteries and it fixed them so I hope it does the same for you many thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Thank you so much!!!! I was able to fix my battery because of your tutorial! I greatly appreciate you!!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/7LkqCVPEUTk/видео.html
THANK U THIS WAS VERY HELPFUL I DID THIS A FEW TIMES BACK IN THE DAYS TO FIX SOME BATTERIES
Hi TruthSeeker, glad this helped.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Thanks!!! Just did this and it's working exactly as you said!! Thank you brother!!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Great video. clear and to the point. Cut right to the chase.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos
Thank u . Worked like a charm on 2 of my batteries. All charged up now. Thank u
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/N0dKuBDYN7s/видео.html
Brilliant! Worked for me with battery not charged for several years. Thank you!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Fantastic video - saved me a fortune!
Hi Colin, I am glad this helped. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like Video link
ruclips.net/video/vFvK351tCDU/видео.html
This is great, thanks!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Xe5oD1ZKmFM/видео.html
Thanks for the video man!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's a link to another video you may like. ruclips.net/video/ogbP2wFGVQE/видео.html
@@DavesShop I did! Definitely, it's my pleasure 🙏
Thanks Dave, it did the trick!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Good information!!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/t-LUAQOqvUA/видео.html
Thank you, this worked!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/zF4aGRn2bS4/видео.html
Awesome thank you very much for that tip
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/UnlOn2RoicY/видео.html
Thank you for this video, it works on my battery, greetings from Bolivia
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos
Thank you!!!!!! That's the answer, I have only had issues with the little batteries. Still a huge ryobi fan.
Andrew, that's been the same for myself I have fixed several 1.5ah and 2.0ah batteries never
so far have I had to fix the 3.0ah or 4.0ah batteries.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
I just did mine and it seems to be working. Thanks
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/Sn-Idvj6U-c/видео.html
That seems a far better way of fixing the battery and it is simple without any special tools.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/JZ9-sIdpfAM/видео.html
Dave, thank you 🙏
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Dude, thank you. Really, thank you
Jim always my pleasure thank you for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Outstanding , thanks.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos
worked perfect!!Thank you!!!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/0bprC3jbO8U/видео.html
Very helpful!
Hi Andrew, Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/SzHd0N0jebM/видео.html
Works great !! Thx from Germany!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/ogbP2wFGVQE/видео.html
Thanks, Dave!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/e6LwuQhwrLg/видео.html
Thank you! I was able to save two out of three “dead” Ryobi batteries.
Hi Jonshaker, Glad the video was helpful. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/SzHd0N0jebM/видео.html
Thank you so much - this worked perfectly - I now have 2 dead batteries both charging and working again!
Hi David, So glad this was helpful. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Thanks a lot. All the best from Panama
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BgwE_hwns_s/видео.html
Dude, you are awesome. I spent $7 on the alligator clips and brought my battery back to life. Thank you so much.
Hi Brian, Thank you for the kind words and for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/Sn-Idvj6U-c/видео.html
Thanks! I had a different model Ryobi battery with a similar issue. I had to do some poking around to find the right contacts, but this process fixed the issue, and the battery now charges! Thanks!
Hi earhornjones, I am glad this video helped fix your issue. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
Genuine & work great!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/H14QEADCs0Q/видео.html
I knew these batteries could drop below a charge threshold, but was unsure how to kick start the darn thing so it would accept a charge cycle. Worked as described...Thanks Dave
Hi D Holmes, I am glad this was able to fix the battery. I have done the same for my own batteries really helps. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
excellent video!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/eVmfSfK6DJY/видео.html
Follow me on Social Media:
Email: davesshop2@gmail.com
facebook.com/hashtag/davesshop
instagram.com/davesshop2/
tiktok.com/@davesshop
twitter.com/DavesShop2
Nice. Thanks!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos
Can't wait to see if I can get this Batt going with your help Thanks
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Xe5oD1ZKmFM/видео.html
thanks so much 😊
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/5Azu7rbyy9g/видео.html
You just affirmed a fix I've seen successfully performed on other videos. Don't be miffed, I always look for a fix for equipment repeated by others so that I'm sure of way to fix a problem. Thanks for your time.
HI JD, I do the same thing when I am looking at how-to videos. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/N0dKuBDYN7s/видео.html
Thank you sir it worked! Much appreciated:)
Hi IC Beauty, I am glad that it helped. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Yow dave im in Jamaica n u just saved my 10" power saw...thank u bless
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/v8pPcPy3xtM/видео.html
Son of a gun! That worked! Thanks.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/7LkqCVPEUTk/видео.html
"Can Power Ryobi"...or CPR for batteries.
Other videos show them drilling into the battery, taking apart a 2nd charged battery, or other unnecessary things, but this was by far the easiest video to follow yet. And although my battery is less than month old (lost my receipt), I'm not paying for shipping to send it to Ryobi warranty to get it replaced. So thank you very much for this video!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/v8pPcPy3xtM/видео.html
I have several of these batteries this was very helpful, I will try this.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/5Azu7rbyy9g/видео.html
Thanks!
Thanks for taking the time to support and watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Sn-Idvj6U-c/видео.html
thank you great video.
I am glad it was helpful.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/2H3qrJB2yF4/видео.html
This worked *PERFECTLY!*
Thank you so much
Mumod Bios
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like.
ruclips.net/video/wUTYYQ0T7Ss/видео.html
thanks, works great now!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Zmm_wxMQjXA/видео.html
Your the best it works!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/3HcQX69LGNM/видео.html
Good tip
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Xe5oD1ZKmFM/видео.html
Worked great, FWIW I just used a good, charged battery and connected it to the dead one to give it new life, didn't have to use the charger.
RicoMnc, great idea glad that worked. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/v8pPcPy3xtM/видео.html
Well gosh darn! It worked!!! Dead batter for years (P189) and now it is flashing green in the charger!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
Nice explanation - I appreciate it :-)
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Bout to try this
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/CkWlcYjE_7I/видео.html
I recovered 3 batteries using this method. Thank you
@robertreightler9605 I am so glad you were able to fix your batteries. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/e6LwuQhwrLg/видео.html
this method does not work with all chargers. I had to use another battery to "jump start" mine. Thank you for this video!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Awesome Amigo. Learn how to use same charger to prrcharge old battery. Thks. Great job. 👍👍👍
Hi Roy, I am glad this was helpful. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/D9gSxSCZtqo/видео.html
I had a Ryobi 18 V battery that sat in my garage for over 18 months that would not take a charge.
The "Fix" was fast...easy & safe.
I used my 12VDC trickle charger ..held the "+" & the "- " cables to the battery posts for slightly over 2 minutes.
I then put the battery into the Ryobi battery charger.
The charger "Testing" cycle ran a little longer than normal then it started the charging cycle !
I did not do any disassembly ...I didn't drill any holes !
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/wUTYYQ0T7Ss/видео.html
Thanks
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/e6LwuQhwrLg/видео.html
Thaks
Hi Joe, Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
That, sir, was very helpful. You might just have saved me £100 worth of batteries I thought I'd killed.
Uncledoris, I am glad it helped. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/wUTYYQ0T7Ss/видео.html
Thanks for the video. I was able to call Ryobi and they just replaced it after looking up the model and SN. I didn’t have to provide the purchase date or receipt.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Thanks you so much! My battery is still in Warranty, but I lost my receipt. I will follow your instruction and fix it by myself!
Hi Kathy, I would still call Ryobi customer service at 1.800.525.2579 sometimes they will make an exception the first time and send you a replacement battery just give them the approximate date of purchase when asked that's what i did the first time it happened to me. They will even tell you to keep the old battery and then you can fix that one.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/kWfB2GlewMc/видео.html
Wow!!! I have a battery that i almost threw away bc it wouldn’t charge..been on the shelf for over a year and I figured “what the heck” and tried this…damn thing actually worked!! Lol…thanks for this video, I’m completely blown away that 1. It worked, 2. I didnt blow up anything 😂🤣
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/3HcQX69LGNM/видео.html
Hi, merci Dave, j'ai suivi ta procédure pour une batterie compatible Ryobi de 18v 5A , la batterie charge de nouveau, avant mon chargeur indiquait que la batterie était HS. Pourvu que ça dure ! 😉
Salut David, la plupart des batteries que j'ai relancées ont duré sur 8 batteries, une seule a cessé de fonctionner. Merci d'avoir pris le temps de regarder ma vidéo et de commenter si vous n'êtes pas abonné à ma chaîne, veuillez considérer que, en plus de cliquer sur la cloche de notification, vous ne manquerez aucune des futures vidéos.
Voici une autre vidéo qui pourrait vous plaire
ruclips.net/video/BEaUgLBX5wY/видео.html
You can also Link a bad Battery to a good battery for 10second bursts saves you taking it apart. Only need 2 pieces of wire +to + and - to - . Good video 👍
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
Worked like a charm! I'm probably stating the obvious, but I think the yellow jumper bypassed the low-voltage chip on the BMS board thus allowing the batteries to take a charge.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Uu4rM7HnNpk/видео.html
Listen Dave! You are a life saver, this worked as expected and it only cost me a little over $4 to buy the alligator wires. I wonder if this works for any other brand of battery?
Hi Kenneth, This process may work on other brands of batteries I just haven't tried them since I use Ryobi tools a lot. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/tmFHdPKBNVc/видео.html
@@DavesShop to look
Thnks brother We all are try to stretch out our pennys
Hi Robert, you are correct glad this was helpful. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
Good 👍
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/3HcQX69LGNM/видео.html
THANK you so much very helpful because BOTH of my batteries died on me and I never registered the batteries or the tools
Thelaquane, I am really glad this helped. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/2JgokW-Ycms/видео.html
Great, it worked. Thanks!
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/ogbP2wFGVQE/видео.html
FYI - if you have a RC battery charger, using it in NIMH mode in the same manner as the jumpered Ryobi charger will do the same thing, with slightly more predictable results. Just deliver a low (aka, 0.2a) charge for a couple minutes, any you should be good to go.
Basically, you're just bypassing the Ryobi battery's built-in charge controller to get it out of "undercharged" status.
Also, thanks for the tip. Resurrected my Ryobi battery from the dead.
Idahoan, Thats great info to know.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/SzHd0N0jebM/видео.html
Yes, this is a safer way to slow charge it up to a usable voltage since you can precisely control the current. I fix quite a few of my batteries from my RC hobbies this way, but definitely a good tip.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
My friend has a Ryobi lawnmower and a string trimmer. One of her batteries stopped charging after a season of use. She threw it out before I saw this video. I imagine the batteries for that have similar circuits and can be fixed the same way.
Hi Bill, not sure I haven't had a 40V battery go bad on me yet but always remember that Ryobi tools and batteries have a 3 year replacement warranty.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/2JgokW-Ycms/видео.html
Thank you! Great Information. Will this work on the older non lithium batteries as well?
@SweetSuccess I have not tried this on non-lithium batteries. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
I popped the little metal in the middle of the torx tamper proof screw and was able to open it with regular torx bit , just in case you don't have the special bit .
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. ruclips.net/video/BEaUgLBX5wY/видео.html
Thank you ,very helpful Mines charging to full but conks out in 20 miniates wheres it was going for up to 1 hour ,Its a line trimmer I may need another battery
@Deidre, I would always if possible have a backup battery for all my power
tools. I have the 40v string trimmer and I have 2 batteries. Not sure what size the battery you have is but if possible for a 18v string trimmer you might want to consider using a 4 ah battery for longer run time.Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
I prefer also to reference vital information
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
This was much better than that stupid short of you where it cut off after you were getting ready to explain the process
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/Uu4rM7HnNpk/видео.html
You probably saved me about $200 in batteries if this works. All my Ryobi batteries died like this after not being not being charged for a long period of time. I figured the cells cant be bad that quick, and it makes perfect sense that this would work.
Mitoni, I have fixed several of my own batteries just like this it does void any warranty on the battery but if you forgot to register the warranty or the battery is older than three years this is a great way to put them back to work.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/2JgokW-Ycms/видео.html
Thanks you for this video!! Now I know what I need to do to get my battery going again. Do I need the yellow wire as well? Or can I get by just using the +/- ? Thanks for your help, and thanks again for the video! 👍
Omega, yes you need to use the third yellow wire too.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/eVmfSfK6DJY/видео.html
Follow me on Social Media:
Email: davesshop2@gmail.com
facebook.com/hashtag/davesshop
instagram.com/davesshop2/
tiktok.com/@davesshop
twitter.com/DavesShop2
nice $4 for clips $8 for security torx kit. I see green on charger now thank you
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BEaUgLBX5wY/видео.html
Great video - thanks!
Sigh
Legaly Ryobi in the US should not be dis-honoring warranty because the plastic covers or any tamper proofing is disturbed/removed. BUT they deny anyways based on that.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/e6LwuQhwrLg/видео.html
Also when putting back on charger it shows 3 bars straight away ,so somthing is not right here Love watching thanks so much
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/7LkqCVPEUTk/видео.html
Hi, my problem is that the charger does not turn on any of my three batteries. Any suggestion? Nice instructional video. Great job! Thank you
Hi Bernardo, here's how to test if the charger is working using a voltmeter. Touch the ground lead (the black lead) on the voltmeter to the negative (or ground) lead on the charger. The voltage output on the voltmeter should be the same as the voltage setting on the charger. If it is not, the charger is malfunctioning and must be replaced. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/SzHd0N0jebM/видео.html
When you put it on the charger, it starts out red, then goes to flashing green while charging. Solid green indicates fully charged.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/V3Vu4YbTFFU/видео.html
i searched for this comment.
yeah solid red and green flashing then the battery is charging. only solid green is not charging.
Solid green means nothing if the battery is not working.
That wasn’t 5v it was 0.52v and after next two times you said it’s increasing but it actually gone down to 0.48v 🤷♂️
My 4ah battery was fully charged for a road trip. I left it sitting in the back of my truck and it rained which I wasn’t expecting. It is totally dead. Al I can think of is that the water must have shorted across the terminals. So my question is can you do this by contacting the terminals without disassembling it? Does doing it your way bypass a circuit board making this necessary? I know that’s probably a doofus question! Great video. Thanks
D, since your battery may possibly have some moisture inside the case I would take it apart to make sure before you try to fix it or charge it.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/vFvK351tCDU/видео.html
My leaf blower seems to be the one you demonstrated. Females don't seem to be able to reach across the battery to press the 2 points to be pressed. Is there any other way to remove the battery from charger.
@judithgibson7068, I agree my wife has a hard time removing the batteries from the tool some times I wished they were easier. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/e6LwuQhwrLg/видео.html
What if you don’t have a spare battery to kick start one wich is not charging……can you use charger with leads to dead battery for that Ten second boosting charge
Hi Peter, Yes you do not need another battery just use the charger and leads.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/pFEEbmnDR6U/видео.html
Thank you for your video, I did and it work like charm :). can you made a new video about Ryobi 40V, I had 3 pack did not work, the light on the battery is flashing when I push. thank you
Thanks for the idea I will have to look into that for a 40v battery. But if you have one that is less than 3 years old it is under warranty and I would call Ryobi customer support they will ask the approx date you purchase the battery and replace it for you. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that so you don't miss out on any future videos
Ryobi service and support and call 1.800.525.2579
Excellent video! Would love to see the 40v version!
I'm really surprised that it kicked in and started charging. When you put your leads to the battery, you were showing 0.48 volts, that's less than a half a volt.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/ogbP2wFGVQE/видео.html
I'm thinking the bigger batteries like the 9ah will need a lot more than 10 second intervals and more than 4 or 5 touch and goes. Right?
@bigbilltoady412, Not sure I only have had to use this method on 1.5AH and 2.0AH batteries all my other larger batteries have had no issues. Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like
ruclips.net/video/-nkYNoIb32c/видео.html
@@DavesShop Still not ready to give up on that one. When I get a little time, I'm going to hook up 3 or 4 good batteries in series to go after that 9'ner. I will subscribe. Thanks
I watched the video and followed everything exactly. The most the charger would give me was 2.5V no matter how many times I touched the wires to ground. I plugged it into the charger anyway hoping for a miracle. Im still hoping. Battery still reads bag. Any suggestions?
Hi Daze, You could have a bad cell on the battery. If it is less than 3 years old it should still be covered under the Ryobi warranty. Go to: Ryobitools.com Call 1.800.525.2579 CUSTOMER SERVICE HOURS:
MON - FRI: 9am - 6pm (EST)
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/W9ajtP0m5ss/видео.html
Hi sir, can you not to use the unmarked terminal to see if it works? Basically you want to charge the internal battery (by bypassing the internal circuit), but it does not make sense to use terminals beyond positive and negative in DC field. It should work if you simply connect positive and negative terminals. Thanks
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/BgwE_hwns_s/видео.html
Ttt
I watched a similar video where a second good, fully battery was used to bring up the voltage on "dead" battery. I was wondering if the use of the "neutral" connection is really necessary since this is a DC circuit?
Hi Lazerbeam, I haven't used that method so I am not sure if you still need to use the neutral.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos.
Here's another video you may like ruclips.net/video/W9ajtP0m5ss/видео.html
@@DavesShop What I was wondering if your method using a charger, but without connecting the "neutral" would work. I suspect the "neutral" terminal on the charger is in fact some sort of sensor rather than a true neutral. Just wondering...
Lazerbeam, sorry, I misunderstood your question. I believe you could skip using the neutral that's just the way I have always used it.
@@lazerbeam3928 The 3rd connection is not a neutral - the yellow - acts as a switch to turn the charger on. The pos and neg terminals in the charger are not energized if you just connect them. When the yellow is grounded then the charger supplies voltage on the terminals.
Could not get this to work. Saw on the multimeter it only put out 1.5v for .5 sec. I used a 12v car battery. 5 sec on then 20 sec off for 3 cycles. 9.9v and was able to charge normally. Next time i would only do it twice. Thanks for the video. I had batt model p189.
James, glad that you were able to fix your battery.
Thanks for taking the time to watch my video and comment if you haven't subscribed to my channel please consider that along with clicking the notification bell so you don't miss out on any future videos. Here's another video you may like ruclips.net/video/eVmfSfK6DJY/видео.html