Got it put together in about 30 minutes. Holes lined up just fine. Had to move the bars on the car but that only added a few more minutes. The video helped. Thanks.
Ordered mine online. It arrived damaged/used, with visible scratches and paint stripping off, etc.... And with no build instructions. Will be taking it to get Rhino-Lined after I zinc it. I know the price point for MaxxHaul is buyer friendly, but - there is no excuse for lack of quality control.
You have the locking bracket assembly kits installed at the inner rack bars but somehow finished them at outer most bars, which is of course the most stable points. Thanks for your instruction throughout. I wonder if the deflector plate can be painted and personalized with something.
"Make sure to use the right phillips head" Dirtbags, how about shipping quality screws!? I used the correct one and they still stripped like a 99cents store toy 🤨
Started assembly today and it took an hour to connect the back to the middle section. The middle section was slightly bent and made it very difficult to line up. I will definitely paint it before I attached to the cross bars. The product is scratched and looks like it will rust. I think a textured paint or Flex Seal would do the trick. What do the rest of you think about using Flex Seal to protect the rack?
THANKS..great video..do you think it will fit on my Rav 4 , so I can load up my kayak to go fishing in the Gulf of Mexico, here in Florida.???thanks Buddy..how can I buy it.????
the screws dont easily go in, I had to make the holes a bit bigger. the instructions are trash, I wasted so much goddamn time getting this put together
The screws in this video look like way better quality than the ones sent :(. The ones I have from you guys are soft and so if the screw driver slips just once or twice then it starts stripping already. Two of the screws won't even go in all the way no matter how hard I try holding it down from stripping
What's the deal with the rubber washers? I was putting it together today and these rubber washers are a joke...a bunch of them just slipped right off the screw heads as I was tightening the screws and the rest kind of wrap around the screw hanging on a word. Even the screws from the front factory sign plate have exactly the same issue with one washer mostly off. Seriously guys if you think you need the rubber washers use screws with larger heads or include metal washers to go on top of the rubber ones.
@@jasminepetal3972 thanks Jas, I trust your opinion, but will double check with our local car wash place..(I pay $$$ per month for unlimited car washes visits) .thanks again Buddy..I don’t want to start washing my car here at home, just because I have a really cool roof rack..MaxxHaul all the way..from Amazon.com
@@jasminepetal3972 I was thinking the car wash brushes might get damaged, or the brushes might damage my new roof rack, as they spin and pass over the roof of my car..while moving through the car wash tunnel..Thanks for responding
Down voted since he both forgot to mention the greasing the gaskets before installing them & putting on the protective covers at the end. Not a big deal but for a simple install I’d say it should’ve definitely been mentioned.
Thanks for this. I got my rack today and there were no instructions with it. This is a life saver!
Got it put together in about 30 minutes. Holes lined up just fine. Had to move the bars on the car but that only added a few more minutes. The video helped. Thanks.
Ordered mine online. It arrived damaged/used, with visible scratches and paint stripping off, etc.... And with no build instructions. Will be taking it to get Rhino-Lined after I zinc it. I know the price point for MaxxHaul is buyer friendly, but - there is no excuse for lack of quality control.
Lots of good tips! Thanks!
You have the locking bracket assembly kits installed at the inner rack bars but somehow finished them at outer most bars, which is of course the most stable points. Thanks for your instruction throughout.
I wonder if the deflector plate can be painted and personalized with something.
Thank to you now i know that i been doing wrong all this year thank for uploaded this video
Thank you for this easy video!
Awesome video! I assembled mine and installed on my toyota 4runner watching this!
didn't use the oil like we were suppose to in instructions....;.lol thanks
"Make sure to use the right phillips head"
Dirtbags, how about shipping quality screws!? I used the correct one and they still stripped like a 99cents store toy 🤨
Yup. That’s what I’m dealing with right now. Screws were shit.
Started assembly today and it took an hour to connect the back to the middle section. The middle section was slightly bent and made it very difficult to line up. I will definitely paint it before I attached to the cross bars. The product is scratched and looks like it will rust. I think a textured paint or Flex Seal would do the trick. What do the rest of you think about using Flex Seal to protect the rack?
How are you finally able to get the center section to line up?
I can highly recommend to use some lubricant for the rubber parts.
THANKS..great video..do you think it will fit on my Rav 4 , so I can load up my kayak to go fishing in the Gulf of Mexico, here in Florida.???thanks Buddy..how can I buy it.????
Thanks man
the screws dont easily go in, I had to make the holes a bit bigger. the instructions are trash, I wasted so much goddamn time getting this put together
Good job, young man!
What if the crossbars are not adjustable?
Does it fit on-a 2022 Hyundai Kona? They have fixed crossbars on them can’t adjust spacing? There made by OEM model J9F21-ACOO
The screws in this video look like way better quality than the ones sent :(. The ones I have from you guys are soft and so if the screw driver slips just once or twice then it starts stripping already. Two of the screws won't even go in all the way no matter how hard I try holding it down from stripping
The middle bar was not easy to fix to the third one. Already we have to bend it hard to fit
One of my lower small bars doesn’t line up with the end piece. The others fit fine. It’s off about a 16th of an inch.
My roof bars are 37” apart at the closest setting. The bar pads are 32” apart at the furthest setting
where did you purchase yours, link, please
What's the deal with the rubber washers? I was putting it together today and these rubber washers are a joke...a bunch of them just slipped right off the screw heads as I was tightening the screws and the rest kind of wrap around the screw hanging on a word. Even the screws from the front factory sign plate have exactly the same issue with one washer mostly off. Seriously guys if you think you need the rubber washers use screws with larger heads or include metal washers to go on top of the rubber ones.
Thanks
Will this work with round bars?
Do you make extensions? I have this basket, but wish it was longer.
Joe Robertson I just received my 56x40 rack 😎😎
How much did it cost
Does WD40 spray work to lubricate the gaskets or do I need a special grease?
Use KY jelly and go in the back door. Some force may be required
The screws are bad. Needed WD40 for the rubber sleeves
Gracias por el tutorial buen producto por el valor que tiene vale la pena 👍🏻😁🌟🌟🌟🌟🌟
How many inches in height
Hey Buddy, I want to get this roof rack but was worried about going through a car wash..what’s your opinion and advice??? Thanks for the great video.
Why r u worried about going thru a car wash w this ?
@@jasminepetal3972 thanks Jas, I trust your opinion, but will double check with our local car wash place..(I pay $$$ per month for unlimited car washes visits) .thanks again Buddy..I don’t want to start washing my car here at home, just because I have a really cool roof rack..MaxxHaul all the way..from Amazon.com
@@jasminepetal3972 I was thinking the car wash brushes might get damaged, or the brushes might damage my new roof rack, as they spin and pass over the roof of my car..while moving through the car wash tunnel..Thanks for responding
Touchless
How Width is the rack?
39 in
LOL!
this basket rust, you gonna damage your car roof paint
That's why you use the rubber gaskets and some berliner spray!
How strong is it Can i put my roof top tent on top of it open it up and sleep two people
Yes. It’ll fit 2 normal sized people or 1 American.
@@NoBullFitness 😂
Down voted since he both forgot to mention the greasing the gaskets before installing them & putting on the protective covers at the end. Not a big deal but for a simple install I’d say it should’ve definitely been mentioned.
Worry about the rust? Galvanize it lol
Don't buy this crap, mine is rusted after having rain last week. I have had mine for 3 weeks.