What do you guys think? I personally cant wait until we get our new CNC machine and we push the envelope even further with intake and head porting, and selling them in matched sets. Click the Link to get a set of Ported Intakes for yourself! automafiaracing.com/collections/ported-intakes
I would like to see a stock 3.7 tuned by auto mafia vs the same car tuned by auto mafia only difference being swapping the intakes from stock to ported. That would be a better comparison on the actual gains of the intakes.
@@automafiaracing first run was a a competitors tune stock intakes I think and then amr tune with ported intakes. You know you guys are making more power than the rest lol do it all amr
I picked up 9 whp and 6flbs @ peak but from 4500 rpm up it feels stronger to redline. Besides long tube headers/ tune this is the third best mod for hp. The 3.7 is amazing headers, ported intakes, good tune you will break 300whp.
@@timcotton6503I didn't pay anywhere near $600. Paid $250 for a new ported lower. The upper is very easy to port your self. I bought a 11-14 mustang gt throttle body (80mm). Port matched everything. Together. Had $300 in it. It will hold go all the way to 7800.
Have you guys dyno run the Hi-Ram adapter for the 3.7 Cyclone yet? I am getting ready to model up a lower manifold adapter for the Holly Hi-Ram Plenum top. I have seen a company that sells their versions but there isnt any details of what their runners look like. They claim a 50hp gain with dyno pictures, but I am wondering if you have had a chance to tune on a setup like this?
I’m going to purchase a ported intake manifold from you guys seems great and how much are your guys tune because I want the tommy one but I’m automatic would it still work?
Does the difference in years make a difference? I have a 2017 3.7 making 298 with full bolt ons (not ported yet) and I’m at 4000+ft elevation in a desert. I should make 315whp and 325trq at sea level.
It may be a dumb question but is it true that the 2011 intakes were poorly made vs 2012+. Supposedly they only gain half of the newer intake hp due to the issue. Will it make a difference?
@@automafiaracing amr I pulled the 5 amp stability control fuse but if I'm spinning badly the car still cuts power an I missing another fuse to pull to remove all nannies?
I just got my ported intakes on but noticed lots of grime under the lower intake so I think it’s time for new fuel injectors do you guys recommend any mods: amr ported intakes mpt time jr airade intake one piece drive shaft and 3.73 gears
So the plastic intakes can be ported? Ever think about casting a metal intake? Or making a customer intake to fit a supercharger? (The hood would probably need a cut out for the supercharger). And im not talking about the procharger. That thing is not worth the money.
Yes we port the plastic intakes. Yes we have billet adapters to run other intakes. The procharger kits we build are fantastic and make 500+ rwhp. We do have a billet intake in the works to use with a tvs style supercharger.
4 года назад+1
I know the car has some prior tunes but over 300 just by flowing the intake track?! Sheesh, are the S550s really this choked too?
@@automafiaracing I told myself I wouldn't touch the engine while living in this stupid, tree hugging/humping state (Missouri) because of emissions testing buuuut... Does it harm or impove MPGs at all?
I just bought a 12 v6 with a automatic I just need a little advice I installed BBK long tubes and mid pipe , 410 gears. The car came with a bama rev x tuner. The car is not launching off the line good at all. The fastest I got the car run was a 13 nine I need to know is my tuner a piece of crap or do I need like a ported intake??? Any advice to help me get this car though faster would be nice…
I got a 93 ghost cam tune and a trans tuning. When I use the ghost cam tune does that already have the trans tuning as well? And also I got the tune meant for ported manifolds and I haven’t gotten them in yet but I ran the tune and the throttle response is super delayed is that because the intakes aren’t on yet ? I was going to wait til I put them in and gave it another shot before I datalog
Hello. Is mustang S197 and S550 3.7 intake flowing different? Which one has better flow and performance? They seem to look little bit different in terms of runner shape
If the heads haven't been ported there will be interference with the head ports and the lower intake.ports. basically you can easily.open the flowers way too much. We dont
@@automafiaracing o ok I understand thank you for breaking it down for me. I ported my own but didnt do any smoothing or polishing but I did Smoothed the heads to match lower intake and I just didnt feel any difference or make any greater flow. Kind of disappointing lol Thanks so much
Yea but fellers u got to remember this is HP at the rear wheels. 303 at the rear wheels with a v6 engine that weighs what 75~100lbs lighter than the v8. Hell yea brother!!
$300 is if you send us the intakes off.your car. We port them.and then send them.back. $499 is us just shipping you brand new intakes we buy from ford and port.
Auto Mafia Racing gonna be ordering a ported intake for my 3.7 2013 this week for my birthday any chance I could get a promo code :D (long shot I know but never hurts to ask)
Auto Mafia Racing just placed my order and shot my coupon code on the cyclone page thanks for the help and can’t wait to install this adding this onto my 3.73 gears one piece driveshaft from axle exchange mpt tune and airade intake not the meanest build but she’s getting there
Will this be a good first mod for my mustang v6 s550? Or should I go Cold air intake with tune? Or should I go turbo 😂… My car only have an x pipe and muffler delete. 😅🥲
What do you guys think? I personally cant wait until we get our new CNC machine and we push the envelope even further with intake and head porting, and selling them in matched sets. Click the Link to get a set of Ported Intakes for yourself! automafiaracing.com/collections/ported-intakes
?? So different ported intakes with the machine
Same intake. Just made by a machine
@@automafiaracing when do you think you will have those intakes done with a machine
Our billet intakes will be done later this year
Will those CNC machined ported intakes give more power then the ported intakes you offer now
I would like to see a stock 3.7 tuned by auto mafia vs the same car tuned by auto mafia only difference being swapping the intakes from stock to ported. That would be a better comparison on the actual gains of the intakes.
That is what we did here
@@automafiaracing first run was a a competitors tune stock intakes I think and then amr tune with ported intakes. You know you guys are making more power than the rest lol do it all amr
;) but the haters say we arent ;)
Great results. This helps encourage me to make the switch. Been debating about the upper and lower intake exchange. Thanks
Yes we see these results daily with our tuning and intakes!🇺🇲
I'm here in California, so I can only watch your great work.
We ship worldwide even to commifornia
No one can tell the difference from the outside between ported and stock intake manifolds same with ecu tune ;)
Correct
I picked up 9 whp and 6flbs @ peak but from 4500 rpm up it feels stronger to redline. Besides long tube headers/ tune this is the third best mod for hp. The 3.7 is amazing headers, ported intakes, good tune you will break 300whp.
AWESOME
Only 9hp? For 600 dollars?
@@timcotton6503I didn't pay anywhere near $600. Paid $250 for a new ported lower. The upper is very easy to port your self. I bought a 11-14 mustang gt throttle body (80mm). Port matched everything. Together. Had $300 in it. It will hold go all the way to 7800.
Have you guys dyno run the Hi-Ram adapter for the 3.7 Cyclone yet? I am getting ready to model up a lower manifold adapter for the Holly Hi-Ram Plenum top. I have seen a company that sells their versions but there isnt any details of what their runners look like. They claim a 50hp gain with dyno pictures, but I am wondering if you have had a chance to tune on a setup like this?
Yes we have made about 20 of the. For customers.
Does it give the power output that’s claimed? 50 seems a bit nuts for a bolt on and tune.
Definetly gonna buy some!
do it! automafiaracing.com/collections/ported-intakes
@@automafiaracing 🤣🤣🤣
Was this HP increase in combination with your tune or the competitor tune?
Do these require head porting or do they neck down to the head size?
They neck down to stock head port size.
I’m going to purchase a ported intake manifold from you guys seems great and how much are your guys tune because I want the tommy one but I’m automatic would it still work?
Yes it still works great and good idea we have a ton of intakes in stock
What’s the going rate???
Does the difference in years make a difference? I have a 2017 3.7 making 298 with full bolt ons (not ported yet) and I’m at 4000+ft elevation in a desert. I should make 315whp and 325trq at sea level.
Yeah your dyno numbers are already corrected for sea level. So you wouldnt make anymore but the car would be faster
How are you making so much more torque than hp on a 3.7 ?
Tuning
Are the ported upper and lower intakes better than the holly lid for a naturally aspirated build ?
No
Will you plz show ported intakes plus bbk tb to see if it also makes a difference
Huge no. Some yes
@@automafiaracing thanks AMR
Np
It may be a dumb question but is it true that the 2011 intakes were poorly made vs 2012+. Supposedly they only gain half of the newer intake hp due to the issue. Will it make a difference?
Not true
@@automafiaracing amr I pulled the 5 amp stability control fuse but if I'm spinning badly the car still cuts power an I missing another fuse to pull to remove all nannies?
besides adding HP what do ported intakes add? louder sound? different exhuast tone??
Mostly power and airflow, but some poeple say it changes the exhaust sound.
Auto Mafia Racing changing the intake on the 3,7. Will I need to change anything else when doing so
Noep
Will ported intakes run correctly without a tune??
They will run but not to their full potential
I just got my ported intakes on but noticed lots of grime under the lower intake so I think it’s time for new fuel injectors do you guys recommend any mods: amr ported intakes mpt time jr airade intake one piece drive shaft and 3.73 gears
Get some 47 lb injectors...mafia tune...long tube headers..catless x pipe.. youre on the way to 300 rwhp
So the plastic intakes can be ported? Ever think about casting a metal intake? Or making a customer intake to fit a supercharger? (The hood would probably need a cut out for the supercharger). And im not talking about the procharger. That thing is not worth the money.
Yes we port the plastic intakes.
Yes we have billet adapters to run other intakes.
The procharger kits we build are fantastic and make 500+ rwhp.
We do have a billet intake in the works to use with a tvs style supercharger.
I know the car has some prior tunes but over 300 just by flowing the intake track?! Sheesh, are the S550s really this choked too?
yes
@@automafiaracing I told myself I wouldn't touch the engine while living in this stupid, tree hugging/humping state (Missouri) because of emissions testing buuuut...
Does it harm or impove MPGs at all?
Improves for sure if you keep your foot out of it
What kind of sounds should I expect after putting on the ported intake?
Normal sounds?
Will the bbk tb bolt too your manifold?
Of course
Is there anything I need to do beforehand installing the ported intake, or can I just put it on and go?
Put it on and gooo
@@automafiaracing thanks
no prob
I just bought a 12 v6 with a automatic I just need a little advice I installed BBK long tubes and mid pipe , 410 gears. The car came with a bama rev x tuner. The car is not launching off the line good at all. The fastest I got the car run was a 13 nine I need to know is my tuner a piece of crap or do I need like a ported intake??? Any advice to help me get this car though faster would be nice…
Ported Intake. 2 relay trans brake. Mafia Tune will wake it up for sure
I got a 93 ghost cam tune and a trans tuning. When I use the ghost cam tune does that already have the trans tuning as well? And also I got the tune meant for ported manifolds and I haven’t gotten them in yet but I ran the tune and the throttle response is super delayed is that because the intakes aren’t on yet ? I was going to wait til I put them in and gave it another shot before I datalog
Send our tuning dept an email. They will know what they sent you.
Auto Mafia Racing okay thank you
Youre welcome
Hello. Is mustang S197 and S550 3.7 intake flowing different? Which one has better flow and performance? They seem to look little bit different in terms of runner shape
Run the one that came on your car. Zero advantage to running s550 vs s197
@@automafiaracing thank You!
anytime
Will these ported intakes make a difference in performance with stock exaust?
Yes they sure will
Is there any sound difference after installing the ported intake manifold?
We have heard customers tell us their exhaust did change a little
AMR could you explain why a set of bigger ported intakes wouldnt make more flow?
If the heads haven't been ported there will be interference with the head ports and the lower intake.ports. basically you can easily.open the flowers way too much. We dont
@@automafiaracing o ok I understand thank you for breaking it down for me. I ported my own but didnt do any smoothing or polishing but I did Smoothed the heads to match lower intake and I just didnt feel any difference or make any greater flow. Kind of disappointing lol Thanks so much
yeah with ours you 100% feel a difference.
That v6 sound good
Thanks
Full bolt-ons, does that include real headers (longtubes) or are they shorties? Throttle body?
Long tubes
Shorties are still headers lmao
@@CalebsCars "Real headers" yeah if you're interested in 3HP extra. They're just pretty looking manifolds. That's not where the horsepower is
0 hp from shortys
How much hp will gain if i buy a tune from yall i got
BBk long tube headers
BBk catted x pipe
73 mm trottle body
Cole air intake
Atak borla
30+ from stock is what we usually see. maxing out around 300-320 rwhp with FBO and E85
@@automafiaracing i got a sct tunner will you guys just send the file ?
Does the intake require a tune after installing?
We highly suggest it.
@@automafiaracingso if I have a 93 mpt tune would that work ?
Is this something any competent auto shop can install? Ballpark install price?
Yes. We charge $300. 2 hrs
I'm curious to know what my 3.7 would make with this ported manifold being that its tuned (SCT), CAI, TB, SHORTY'S, DRIVESHAFT...
probably roughly the same. these cars max out around 300-320 rwhp no matter what it seems.
Even after tune, headers, Cai, throttlebody, and full exhaust? What about adding. A charger?
So u only get 303 for a fbo headers, tb, cai, etc?
That's about what they make what did you expect
Out of a V6 3.7? Yeah. I mean thats all it has. CAI, Headers, TB.
Yea that's pretty good for a naturally aspirated v6! haha
Pretty much
Yea but fellers u got to remember this is HP at the rear wheels. 303 at the rear wheels with a v6 engine that weighs what 75~100lbs lighter than the v8. Hell yea brother!!
How much it’s the ported intake Iam interest to get one I live in Tampa
$499 shipped
@@automafiaracing 300 or 499 I seen both???
$300 is if you send us the intakes off.your car. We port them.and then send them.back.
$499 is us just shipping you brand new intakes we buy from ford and port.
@@automafiaracing oh okay thanks!
No prob
what other mods does the car have?
Watch the video and check it out!
How much do you guys charge to port an intake?
$300 if you send the intake to us. That includes return shipping to you.
automafiaracing.com/collections/ported-intakes
How is that car making only 288HP. 3.7 are 305HP out of factory? Wait, what year it that Stang? Oh, looks like a 2012.
Crank VS Wheel HP. Sure the factory claims they make 305 crank or engine hp. but at the wheels stock the make 230-250 rwhp.
@@automafiaracing I just got sad enough to get a beer.
Its the truth haha. Dont worry we turbo them and makw 550 to 600 rwhp
@@daniejames2591 it's purely different testing methods.
Coming right off of Banks Power videos, I am severely disappointed in Auto Mafia for having their hood up during that dyno run...
We do many runs. No need to cook an engine. Hood closed didn't lose any power We have tested it many times.
Good video information but you really really really need a microphone.
Yeah we will redo this video here at some point
Are this dyno values WHP or flywheel hp?
Was the engine out of the car? Thats the only way to measure flywheel hp.
Is it running on stock internal of the block?
It's a stock motor yes
Auto Mafia Racing can I go full Bolt On’s and tune without upgrading internals? I’m interested on buying a tune but don’t wanna over work my motor
Yes lol you can boost it with a stock motor
Auto Mafia Racing aha Thankyou, you have a link for a tuner? I couldn’t find one on your site.
automafiaracing.com/collections/tuning/products/copy-of-2011-2014-3-7l-v6-cyclone-mustang-custom-mafia-tune-sct-devices
I thought these were 305 hp out the dealership
That would be crank hp. To the wheels stock they make 250 to 270 stock and 250 to 310 with mods NA
Auto Mafia Racing gonna be ordering a ported intake for my 3.7 2013 this week for my birthday any chance I could get a promo code :D (long shot I know but never hurts to ask)
Use IMTHEBOSS
Auto Mafia Racing my man 🏎
Auto Mafia Racing just placed my order and shot my coupon code on the cyclone page thanks for the help and can’t wait to install this adding this onto my 3.73 gears one piece driveshaft from axle exchange mpt tune and airade intake not the meanest build but she’s getting there
Will this be a good first mod for my mustang v6 s550? Or should I go Cold air intake with tune? Or should I go turbo 😂… My car only have an x pipe and muffler delete. 😅🥲
Turbo is always the answer! But yes ported intakes work great too!!!!