To keep the centering of circular patterns, the fabric must be moved at the same time as the circular foot. This will allow the centering of the stitch patterns. Don’t fully raise the foot, only lift it slightly enough to allow the left or right shifting of the fabric, in unison with the foot. Practice. Practice Practice. 🙂
First time I've seen this foot and stitch - fabulous! This will be on my purchase and try list. Thank you so much! You are easy to listen to, easy to follow.
Yes, your tutorial has inspired me indeed to try this presser foot. Very comprehensive instructions too. I am going to buy the flower stitch foot. Thank you.
Great tutorial and ideas, I bought this foot at the end of last year, played with it and put it away. i had no idea that you could use a variety of stitches, so glad I viewed your tutorial. many many thanks, Jess
I bought the flower stitch foot well over a year ago and haven't taken it out of it's box. There are so few tutorials / instructions on how to properly, and fully, use it that I just put it in a drawer. Thank you for this. I may just bring it out for my next project!! :)
Hi Trish! That's wonderful! We hope you do take it out of the box, begin practicing with it and discover all the great variety of stitch combinations you can make. Thank you for watching!
Thank you for this tutorial. I have had my foot on my shelf with a couple others I just can't seem to use correctly but I think I will take this one back out and give it another try.
Hi rlmorrison46, That's great! We are delighted our video inspired you to use this foot! Have fun with it and show us what you make at #nancysnotions we would love to see! Thank you so much for watching! :)
Ma'am, it is a great tutorial. But let me know what should be the stitch length and width tension... Does that matter or are these the same as for normal stitching.
recommendation to get the rings in center. you do not lift the foot while adjusting your attachment for the next pattern to sew, you may have to manually lift the foot instead of you machine software.
I bought one years ago and played with it for a few hours and then I put it away.I may just get it out after watching your video.I have a better understanding how to use it thanks
Hi, just yesterday, i hsd been sewing concentric circles with flower stitch foot with built - in stitches . With fiffetent colour contrast. Now, ,duddenky,vthe foot is norlt rotating. What may be thev reason.? How should I set right. ?pls help me. :)
I'm getting this foot for Christmas so I clicked on the link to get the free pattern sheet but it said "not found". Is there some way to still get it.?
This foot will fit any low shank sewing machine. If your Brother sewing machine is a low shank then, it will fit. Please refer to the link below to determine your shank height: www.nancysnotions.com/text/content/products/footlisting.html Thank you for watching!
Can you please tell me what I might be doing wrong... I try to sew with this foot and I keep breaking needles because I hit that metal bar that sticks out from the dial where you can change the size of flower. I would appreciate any ideas, thanks
check the stitch width, also the position of the needle if you have 3 positions on your machine should be at the center before your choose the stitch to sew
Hello Nancy I think I correctly fitted the flower stitch foot but I found that the foot is not rotating I also don't have a pressure switch in my brother FS130 Please can you help?
Hi Mumtaz Mahmood, Please reach out to our Sewing and Product Advisors by clicking on the link below. They will be able to assist you. Thank you! www.nancysnotions.com/jump.do?itemID=5&itemType=LANDING&page=sewing_prod_advisor
Mumtaz Mahmood I also cannot get my foot to rotate I have removed, tighten, re-listened n watched this video over n over It appears ready to go but doesn’t rotate Thanks
Hi Sudipa, Please click on the link below to find the free pattern, the price of the foot and all the other materials Kate used at nancysnotion.com: www.nancysnotions.com/category/downloadable+projects/flower+stitch+foot+covered+buttons.do?extid=%22&G75&%22&code=NNOADV-1320 Thank you so much for watching :)
Hi naomi hazell, Please reach out to our Sewing and Product Advisors to help you trouble shoot what might be happening. www.nancysnotions.com/jump.do?itemID=5&itemType=LANDING&page=sewing_prod_advisor&intcmp=FFSA Thank you for watching!
@@NancysNotions it seems to me that you have mechanical problems a skip stitch has the foundation on the hook not catching the thread to form a stitch, and causes are many, could be needle bar lower dead point, wrong needle, bad hook, space between the needle and the hook at the catch point is to far, needle to tick for light materials, foot not all the way down to hold the fabric and causing flagging, etc. please take the machine to a expertise for evaluation.
I was wondering if it was possible to make slightly larger circles by changing the needle position. I need to make 1.25" circles for a project and I was wondering if this foot could work for this
Hi Shakita, I just viewed the video and it seems to work just fine. I recommend refreshing your browser or closing out of it and then going back into it. Thanks--Laura from NN
Hi Eleonore, Please check to make sure your machine is a low shank machine. This speciality foot will fit all low shank screw on machines. You can determine your shank size by clicking on the link below and following the instructions: www.nancysnotions.com/text/content/products/footlisting.html Thanks for watching!
I understood this one better than others I have watched. Thank you!😊
To keep the centering of circular patterns, the fabric must be moved at the same time as the circular foot. This will allow the centering of the stitch patterns. Don’t fully raise the foot, only lift it slightly enough to allow the left or right shifting of the fabric, in unison with the foot. Practice. Practice Practice. 🙂
Great tutorial, my foot just arrived. can't wait to play. Love your stitch library, such a great idea
First time I've seen this foot and stitch - fabulous! This will be on my purchase and try list. Thank you so much! You are easy to listen to, easy to follow.
Hi Donna! We are glad you enjoyed the video! Thanks for watching :)
Yes, your tutorial has inspired me indeed to try this presser foot. Very comprehensive instructions too. I am going to buy the flower stitch foot. Thank you.
Brilliant, many thanks for the very clear tuition of the flower foot.
Hi Carol, Your welcome! Thank you for watching :)
Great tutorial. Also, even though I'm not into jewelry (at all!), that's a beautiful ring!
Thank you for being so clear. Your tutorial is excellent.
Thanks for sharing this including the not so perfect ones and how to use them 👍
Great tutorial and ideas, I bought this foot at the end of last year, played with it and put it away. i had no idea that you could use a variety of stitches, so glad I viewed your tutorial. many many thanks, Jess
Hi Jess, Your welcome! We are so glad we could inspire you with the possibilities this specialty foot can offer. Thanks for watching!
Thanks for this very clear video - it helped me decide to purchase the foot.
My flower foot came today glad I found you I do have embroidery needles l need to buy embroidery thread thank you so much
You give a lot of great information. I didn’t know you should use rayon thread. Thank you!
awesome! really like it.
Maybe put a litle dot in the middle with a washable marker? helps to central the flowerfoot a bit?!
I bought the flower stitch foot well over a year ago and haven't taken it out of it's box. There are so few tutorials / instructions on how to properly, and fully, use it that I just put it in a drawer. Thank you for this. I may just bring it out for my next project!! :)
Hi Trish!
That's wonderful! We hope you do take it out of the box, begin practicing with it and discover all the great variety of stitch combinations you can make. Thank you for watching!
Very good job. Thank you so much
Thank you for this tutorial. I have had my foot on my shelf with a couple others I just can't seem to use correctly but I think I will take this one back out and give it another try.
Hi rlmorrison46,
That's great! We are delighted our video inspired you to use this foot! Have fun with it and show us what you make at #nancysnotions we would love to see! Thank you so much for watching! :)
Such a good tutorial.
Very helpful. Thanks for sharing your experience !!! xxx
Hi Andrea, You're welcome! We are glad you found the video helpful. Thank you for watching! :)
Ma'am, it is a great tutorial. But let me know what should be the stitch length and width tension... Does that matter or are these the same as for normal stitching.
recommendation to get the rings in center. you do not lift the foot while adjusting your attachment for the next pattern to sew, you may have to manually lift the foot instead of you machine software.
Can this be used with other decorative stitches or just zigzag ?
Thank you.
Why did you remove link of your stitching tutorial while you've already mentioned in your video description???????
I bought one years ago and played with it for a few hours and then I put it away.I may just get it out after watching your video.I have a better understanding how to use it thanks
Can I do flower design on a big dress. How do I manadge it?
Thankyou
Nancy, I wish you sold a copy of your pattern stitches!
The woman in the video is not Nancy. Sadly, Nancy Zieman passed away in November, 2017 🫤 She is missed.
Would u share the flowers setup catalouge u made or sell it plz. ?
How much price and from 😢where i can buy it.
great video, but the link to the Free Pattern Instructions is no longer available?
المطلوب معرفة السعر ومكان البيع فى الاسكندرية
Will this work with a 1976 singer 770 golden delux?
i want to eventually work my way to crafting racoco clothing for men.
thk u for video
Hello please madam can you tell me I have old singer discmatic machine this flower stitch foot will fit in it or not
Hi, just yesterday, i hsd been sewing concentric circles with flower stitch foot with built - in stitches . With fiffetent colour contrast. Now, ,duddenky,vthe foot is norlt rotating. What may be thev reason.? How should I set right. ?pls help me. :)
Can the flower foot be used on cork fabric?
Will it fit a babylock Presto model BLMPR? Where would I get one?
I'm getting this foot for Christmas so I clicked on the link to get the free pattern sheet but it said "not found". Is there some way to still get it.?
Is this foot for a high shank machine?
No, only low shank unless specifically stated in the foot.
Are you using a zigzag stitch
Please flower foot rate
Can you use this foot on a Brother sewing machine?
This foot will fit any low shank sewing machine. If your Brother sewing machine is a low shank then, it will fit. Please refer to the link below to determine your shank height:
www.nancysnotions.com/text/content/products/footlisting.html
Thank you for watching!
Can you please tell me what I might be doing wrong... I try to sew with this foot and I keep breaking needles because I hit that metal bar that sticks out from the dial where you can change the size of flower. I would appreciate any ideas, thanks
please manually rectify your stitch width before you press the pedal, it seems to me that is to wide
@@luisoswaldobarajas thank you, I will try that !
check the stitch width, also the position of the needle if you have 3 positions on your machine should be at the center before your choose the stitch to sew
@@luisoswaldobarajas Thanks so much!
@@danatucker6390 I moved the large screw in back and then it stopped hitting.
Hello Nancy
I think I correctly fitted the flower stitch foot but I found that the foot is not rotating
I also don't have a pressure switch in my brother FS130
Please can you help?
Hi Mumtaz Mahmood,
Please reach out to our Sewing and Product Advisors by clicking on the link below. They will be able to assist you. Thank you!
www.nancysnotions.com/jump.do?itemID=5&itemType=LANDING&page=sewing_prod_advisor
Mumtaz Mahmood I also cannot get my foot to rotate
I have removed, tighten, re-listened n watched this video over n over
It appears ready to go but doesn’t rotate
Thanks
I don't have a pressure switch
No sé pero mi prensatelas no cose las flores no se que diablos pasa
Such a beautiful lady.
Very helpful guidance 😊
Please tell me the approx price of this flower foot? May I purchase from amazon online?
Hi Sudipa, Please click on the link below to find the free pattern, the price of the foot and all the other materials Kate used at nancysnotion.com:
www.nancysnotions.com/category/downloadable+projects/flower+stitch+foot+covered+buttons.do?extid=%22&G75&%22&code=NNOADV-1320
Thank you so much for watching :)
why dose my Flower foot keep missing stitches dose it lot on silk sater new machine to
Hi naomi hazell,
Please reach out to our Sewing and Product Advisors to help you trouble shoot what might be happening. www.nancysnotions.com/jump.do?itemID=5&itemType=LANDING&page=sewing_prod_advisor&intcmp=FFSA
Thank you for watching!
The page does not exist
@@NancysNotions it seems to me that you have mechanical problems a skip stitch has the foundation on the hook not catching the thread to form a stitch, and causes are many, could be needle bar lower dead point, wrong needle, bad hook, space between the needle and the hook at the catch point is to far, needle to tick for light materials, foot not all the way down to hold the fabric and causing flagging, etc. please take the machine to a expertise for evaluation.
I was wondering if it was possible to make slightly larger circles by changing the needle position. I need to make 1.25" circles for a project and I was wondering if this foot could work for this
What happened to the video I can hear it but can't see it help please
Hi Shakita, I just viewed the video and it seems to work just fine. I recommend refreshing your browser or closing out of it and then going back into it.
Thanks--Laura from NN
Nancy's Notions thank u it's working now
Can one use this foot on a babylock grace machines
Hi Eleonore, Please check to make sure your machine is a low shank machine. This speciality foot will fit all low shank screw on machines. You can determine your shank size by clicking on the link below and following the instructions:
www.nancysnotions.com/text/content/products/footlisting.html
Thanks for watching!
Хотелось бы получить перевод на русский.
Notes means your homework pages
Hai mam please show your notes clearly for note down by the viewer s
Pp