EASY DIY FOLDING TABLE FOR YOUR JEEP // STEP BY STEP
HTML-код
- Опубликовано: 5 авг 2024
- My take on a folding table for the rear gate of your overland vehicle.
4XTRAIL Amazon Associates Links:
Stainless Steel Coffee Filter: amzn.to/3jp72ep
Grand Trunk Hammock: amzn.to/3dP5PMh
Milestar Patagonia MT 37” Tires: amzn.to/3ccS1ed
#camping
#jeep
#foldingtable
#diy 
Авто/Мото
Actually like this table better than the high end, metal expensive ones. Definitely going to make one myself. Thanks!
Update: already started the project. Wood is cut and sanded, heading to Home Depot for stain, hinge magnet and hardware!
Love it! Hope the rest of the project went well!
@@4XTRAIL went great. Wish I could show you.
Coffee on the trail? BIALETTI ! the one and only way…
Hi from Toronto Ontario Canada. I made my tail gate table with zipties holding the piano hinge and tied up the table support to the tailgate hinge on the left hand side. No screw holes in the metal to rust .
Love it! Any issues with rattling or does the magnet hold it secure enough? Thanks for sharing!
Yes it does rattle a bit. I think I need better magnets to hold it tighter.
Great quick and easy upgrade. Thanks for sharing!
Evergreen Cottage I’m glad you enjoyed it!
Great job. Thank you for sharing.
Appreciate the comment, thanks!
Great video. Making this for my daughters Jeep.
Love it! Thanks for the comment.
Made one love it. Thanks for vidoe
Glad to hear! Thanks for the comment
We are thinking the same idea!! Thanks for the video
Less Traveled Right on! 👊🏼
Great video. Thanks
Glad it helped!
Cool channel Kaleb .. I recently bought a tiny little camper trailer (bed in a box) and getting into boon-docking/dry camping etc. no off-road yet, but I tend get the outback muddy enough from time to time. Good luck w the channel, looking forward to new cool content!
Sean Scales That’s awesome! I’m still rocking my ground tent. I’ve seen some pretty capable Subi’s out there. They make good overland vehicles!
Doing this tomorrow. Adding a molle system to the underside of the table
Great idea! I love it. Thanks for the comment!
Hi I'm from Saudi Arabia and I really like the table especially the magnetic.
Hey! I’m glad you enjoyed the video. Thanks for the comment!
Did this to my JKU today thanks
Awesome - glad it was helpful! Thanks for the comment!
Nice I like it
👊🏼💥
Nice job!
Appreciate it!
really nice job
Appreciate it!
Just a reminder you probably already know this.
The hammock really only needs one tree. Tie the other end to the bars on your Jeep. Have fun.
😂 right on!
I made one of these tables for my jeep but no holes only gorilla tape and paracord tucked inside tailgate. Yes fun and easy mod!
Love it! 👏🏼
How is the gorilla tape holding up?
Ever tried wood burning, sand it and then stain. Might give it a different look.
Cool idea!
Looks great. Is it 3/4 in thick? Also how did the paracord hold over time?
Just 1/2” plywood and it’s holding up great! Original piece of paracord still holding up fine too. Has a little flex with weight on the table - wire cable might be better if you can find a way to keep it from rattling when off-road!
@@4XTRAIL awesome just got the hardware. Missing the magnet, what size did you use and where to source it? Thanks again
@@guritche Awesome! I want to say it was a 25lb magnet, about the size of a silver dollar. Picked mine up at Home Depot.
Did you get that magnet on Amazon? If so, could you please link?
I got mine from Home Depot but here’s my Amazon Associates link to a similar product: amzn.to/3gALtrQ I’m supposed to say that buying through this link is the same price for you but does help out the channel! Thanks
What are your tires and where’d you get them !!!!!
Thanks for the comment! Just added a link to the Milestar Patagonia tires in the video description.
I also did a review of them here: ruclips.net/video/yI2sLlxvdw8/видео.html
I built this yesterday and whenever I close the Jeep the shelf comes down. It’s like the magnet isn’t holding? Any suggestions on how to fix this?
Mine did that when I closed the gate too hard. A slightly larger magnet would probably hold it in place for you but I’ve just learned to close the rear gate a little lighter and it hasn’t been an issue. Hope that helps!
@@4XTRAIL ok- we definitely close it hard so I’ll try that!
Still running strong? Any updates or things you should have done differently?
Yep, still going strong! A couple of the screws holding the hinge on have worked their way lose but it’s still stable for food prep and other light use so I haven’t bothered to put new ones in. Using small cable vs the para cord would give the table less flex under weight and also adding a second line to the other side if you want to use it for heavier work.
@@4XTRAIL Thanks for the reply. I will begin working on this project in a couple days. Thanks for the tutorial and the advice. It is greatly appreciated.
OMG Ok this makes 3 mods I'm gonna do...
Haha, right on! Glad you’re enjoying the channel 🤙🏼
Hey mate, what were your dimensions for the ply ? L W H 😊
Hey! 28.5” x 14” x .5” 🤙🏼