@@estrada.v37how’s the drone? I am 50/50 about installing my PLM Y-pipe. I have PLM axleback and midpipe on right now car sounds really good. Idk if the Y-pipe might be too much lol
@@vr30_will44 Since I have the resonated axleback I dont have any drone. If you have the non resonated axleback I know it will be louder because that's the one on the white Q60. Either way these cars won't get crazy loud until you get downpipes. I will make a POV video so it can give people an idea on how it sounds from the inside.
Those roads where you live at must be like silk. I would have ripped the bottom of my Q50S here on the streets/roads of NYC. Love the way yours sounds. I had put Cherry bombs on & it sounded sick & it wasn’t stupid loud either.
Just installed the rev 9 midpipe/y pipe to my resonated Helmholtz axleback exhaust… it’s significantly louder AND sounds amazing. Anyone thinking of doing this set up should 100% do it
@@RealWorldLLC I believe the bltz one is the replica one I’m not too sure how the fitment is on that one. I have the blitz on from Concept Z performance. You would need to cut your stock bumper for the quads. And it’s on with 3M tape and some screws and it’s just painted
I have an eBay axle back exhaust but I do like the deep sound and bass that this mid pipe gives. I hate the raspy sound ive heard from other exhaust systems.Would this be able to the connect to axle back I have already tho?
Question, what is the size of the quad exhaust tips? I'm going to do the Blitz Q50 rear diffuser but the 18+ version and need to know the sizes to get god fitment. Great sound! I also have the Helmholtz axleback.
I really appreciate all the likes and comments 🙏🏽 make sure to subscribe! :)
The mic didn’t quite pick up the cold start in the beginning! I have a separate video on just the axle back at the end of the video! 🙏🏽
It sounds really good. Can we get a video of what it sounds like from the inside and flyby of you flooring it?
Yeah I can definitely do a video like that!
@@estrada.v37how’s the drone? I am 50/50 about installing my PLM Y-pipe. I have PLM axleback and midpipe on right now car sounds really good. Idk if the Y-pipe might be too much lol
@@vr30_will44 Since I have the resonated axleback I dont have any drone. If you have the non resonated axleback I know it will be louder because that's the one on the white Q60. Either way these cars won't get crazy loud until you get downpipes. I will make a POV video so it can give people an idea on how it sounds from the inside.
@@estrada.v37 when we gone get the video?
@@aislaado yesss I will make the video just bear with me I’m currently out of town 🫶🏼
Those roads where you live at must be like silk. I would have ripped the bottom of my Q50S here on the streets/roads of NYC. Love the way yours sounds. I had put Cherry bombs on & it sounded sick & it wasn’t stupid loud either.
We do have some roads that are bad! But for the most part they’re pretty smooth!
Bro told the car drive yourself while I record the video💀
Brooo where did you get those rear side splay splitter thingy
Honestly its a 3.0 and the internals don't compare to a VQ35HR or a VR38DETT which is why its so hard to get a good loud sound from the VR30.
Yeah definitely that’s the only think I wish the VR30 had a deeper sound that would sound good enough with just an axle back
2.0t has a insane deep note to it
Just installed the rev 9 midpipe/y pipe to my resonated Helmholtz axleback exhaust… it’s significantly louder AND sounds amazing. Anyone thinking of doing this set up should 100% do it
you have the links to where you got them from this sounds amazing😩
Shii sound nice doe 🔥🔥 it would be nice if you could put valves for it doe
That would be sickkkk
Love that trunk!
Thank you 🙏🏽
The q60 should so get the same mid pipe, and compare the two since it doesn’t have mufflers
Definitely will be a future video! Since it’s my sisters car I’ll have her do the spending haha
Amazing vid bro🤙🏼
Hell yeah! Thank you bro 🙏🏽
sounds really good
aye bro, what size are those exhaust tips and where did you get them
They’re 4in! I believe I got them off of eBay I don’t quite remember 😅
Aye man really nice car. We’re can i get the quad tips & the diffuser with the 3rd brake light at.
It’s the blitz rear diffuser!
@@estrada.v37thank you
I wanna hear the exact setup on a 3.7
It would sound so nice on a 3.7 I bet!
Where did you get that diffuser
It’s the blitz diffuser!
I’ve been wanting that rear bumper 😮
It’s the older gen rear bumper on a 2018 q50 with the blitz diffuser
@@estrada.v37 it’s the bltz one right not the blitz? How was the fitment does it need molding or just painting
@@RealWorldLLC I believe the bltz one is the replica one I’m not too sure how the fitment is on that one. I have the blitz on from Concept Z performance. You would need to cut your stock bumper for the quads. And it’s on with 3M tape and some screws and it’s just painted
@@estrada.v37 damn you spent the bread on it 🔥
@@RealWorldLLC I had to to make sure everything fits right 🫡 especially if I’m already spending the money to paint it and that good stuff 😅
Adding a different y pipe and mid pipe doesn’t void warranty right ? I’m thinking of putting the Helmholtz axle back with just a y pipe on my q50 3.7
As long as you still have your cats you should be fine.
Beautiful
I have an eBay axle back exhaust but I do like the deep sound and bass that this mid pipe gives. I hate the raspy sound ive heard from other exhaust systems.Would this be able to the connect to axle back I have already tho?
If you have a resonated axle back it should sound similar but if it doesn’t have it it’s going to sound louder and most likely more raspy
@@estrada.v37 damn, yea my axle back is literally two pipes😂
@@CallMeStati damn it’ll sound louder Fs and more raspy 💀
Question, what is the size of the quad exhaust tips? I'm going to do the Blitz Q50 rear diffuser but the 18+ version and need to know the sizes to get god fitment. Great sound! I also have the Helmholtz axleback.
The best fitment would be the 4.5 quad tips! The ones you see in the video are 4inch but I plan on ordering them soon!
Awesome thanks for that info!!! Keep up the videos!
@@estrada.v37 where do you order them from?
@@joshsandoval7691 the y pipe and mid pipe was from redline360 and the quad tips from Amazon! The axle back I got from z1 Motorsports!
so did you just swap the 2018+ tail lights on?
No mine is a 2018 with the older bumper in order to fit my diffuser better.
Anada day anada victowy fo da OG
Is that the resonated or non resonated Helmholtz?
This is the resonated one
link for the diffuser?
conceptzperformance.com/blitz-aero-speed-r-concept-rear-diffuser-for-fogs-frp-infiniti-q50-60179_p_56872.php?quantity=1
@@estrada.v37it's 1000 dollars ?
Less Gooo
Bro the sedan is faster then the coupe
What rims are those
These are the GMR CH-7!
You still have stock down pipes?
Yeah I still have stock down pipes! It’ll sound a lot louder once I get lower down pipes but I’m still debating between lower or full! 😭
@@estrada.v37when I ran B6A non res ldp, with PLM mid and y pipe (with 2 Amazon resonators) and muffler delete axel back. It sound almost the same
@@GorillaAndy_ what’s you’re input on the B6A downpipes? I was looking into those!
@@estrada.v37 bro just go LDP also do you have links to these products that you ordered?
Sexy car just like the owner 😩
Did this give you check engine light or was it safe