I'd buy these just for the soft cables. Nothing I hate more than trying to use my multi-meter than the wires are constantly getting tangled while I'm trying to work.
Great tools just make work so much more enjoyable and proficient and help reduce or eliminate unnecessary frustration. What's great today is that we don't have to pay Fluke or Snap-On prices
Just picked up my first order from you guys and the probes are amazing. I've been watching/learning so much from you so I wanted to support. Give and take! Keep up the great work, love from Sweden 🇸🇪
I have been repairing electronics since about 6th grade of grade school repairing blown car amps and radios for the high school students at that time. I have used a lot of tools and a lot that is on my bench is from Alex from his shop. I am just a hobbyist but fairly good at it and enjoy good tools. Just got his probes and love them. I’m in Texas and average 4-5 day from his shop to my door.
I'm going to put an order in shortly. I'm building a cache of soldering supplies for my nephew to learn soldering in 10.5-13.5 years from now. When my nephew is 11-14 years old. I love the grinding pen, I've used it to cut traces and modify circuit boards as well as adding holes to a pcb to route wires for a switch. Cheers!
And yes, his braid wick is the best I've ever used. When you cut in small pieces it does not shatter and leave copper wire pieces on your board that can short things out if you don't see that they got left behind.
hey, I like your tips on soldering, it brings back memories of when I used to do electronic stuff... and yeah, you can touch the multimeter cable by accident, and it sucks when it melts. I used to take it as a sign that, hey, I do work in this thing, it's like a guitar without scratches, if it's in mint condition, you don't use it and are doing a disservice. But I digress; the new probes are excellent.
this is awesome, i'm in the automotive bizz and i have destroy alot of cables due to heat and soldering irons tha tend up on the cable by mistake etc will def try it out i
Would like alligator clips for the probes and by the way good alligator clip jumpers with soft cables of different lengths with sturdy clips and good rubber covers, not vinyl. Also need clippers that can reach at least 6 inches into a very tight spot with associated needle nose pliers with ridges on the inside nose.
I must have looked for probes on your site when you were between products! This is good news. The kit probes I have are lousy. I didn't understand why your site didn't have probes. Good news! They will be better than factory.
I bought some from him that had straight and flexible tips so I guess I don't have the old ones he is referencing. Even at that, the ones I have are the best probes I have ever used
I love how happy he is 😊
Because he did a good JOB ( better than factory )
I'd buy these just for the soft cables. Nothing I hate more than trying to use my multi-meter than the wires are constantly getting tangled while I'm trying to work.
Great tools just make work so much more enjoyable and proficient and help reduce or eliminate unnecessary frustration. What's great today is that we don't have to pay Fluke or Snap-On prices
Just picked up my first order from you guys and the probes are amazing. I've been watching/learning so much from you so I wanted to support. Give and take!
Keep up the great work, love from Sweden 🇸🇪
What a Great design!!! I want to buy, now.
i need this probes its heat resistance and it has sharp needle
I have been repairing electronics since about 6th grade of grade school repairing blown car amps and radios for the high school students at that time. I have used a lot of tools and a lot that is on my bench is from Alex from his shop. I am just a hobbyist but fairly good at it and enjoy good tools. Just got his probes and love them. I’m in Texas and average 4-5 day from his shop to my door.
I'm going to put an order in shortly.
I'm building a cache of soldering supplies for my nephew to learn soldering in 10.5-13.5 years from now. When my nephew is 11-14 years old.
I love the grinding pen, I've used it to cut traces and modify circuit boards as well as adding holes to a pcb to route wires for a switch.
Cheers!
Even advertisement better than factory!
We did a great job! Amazing! 😎
Your sales experience has been proved here..mashaAllah ❤ wallahi I'm totally convinced now to purchase these probes 😂
I like the way you develop your products, focused on quality instead of reducing the production cost, keep up! 👍
While I do not need these, I dont work on such complex machines, I WILL get them BECAUSE I burn my cords often. 🤣
Most of the tools you are selling are very good athough the market is constantly changing. Best of luck.
Truly the best Probes i've ever seen , cheers from tunisia
my neighbor how are you doing
This man is single handedly making the best micro soldering equipment in the market, keep up the great work.
Northridge should be on Qvc
Gidday, thank you and congrate's on your efforts.Every angle is covered 100%.
And yes, his braid wick is the best I've ever used. When you cut in small pieces it does not shatter and leave copper wire pieces on your board that can short things out if you don't see that they got left behind.
hey, I like your tips on soldering, it brings back memories of when I used to do electronic stuff... and yeah, you can touch the multimeter cable by accident, and it sucks when it melts. I used to take it as a sign that, hey, I do work in this thing, it's like a guitar without scratches, if it's in mint condition, you don't use it and are doing a disservice. But I digress; the new probes are excellent.
hey nice upgrade and nice price so what about u add alligator clips as a needle replacement too?
The NF sucker is the best I've ever had
Count me in. 👍 The extra length is exactly what I need, not to mention better tips that don't keep bending or are a bit on the short side.
Ive just ordered 3 sets of regular probes today.
My next order goes to NF.
Great video.
Purchased! Thanks!
this is awesome, i'm in the automotive bizz and i have destroy alot of cables due to heat and soldering irons tha tend up on the cable by mistake etc will def try it out i
Best probe i like that I need that new probe
Nice 👍👍
Would like alligator clips for the probes and by the way good alligator clip jumpers with soft cables of different lengths with sturdy clips and good rubber covers, not vinyl. Also need clippers that can reach at least 6 inches into a very tight spot with associated needle nose pliers with ridges on the inside nose.
I am definitely sold on these, but will wait until you have spare needles in stock. Please add the link for probes to your summary.
nice
Thanks!
Even his informercials are compelling.
that's why alex is the best...just buy from him and spare the headache for something else..XD
I must have looked for probes on your site when you were between products! This is good news. The kit probes I have are lousy. I didn't understand why your site didn't have probes. Good news! They will be better than factory.
Id love to get the probes and other stuff but no shipping to South Africa
YESSSS more vids MOREEEEEEE VIDSSSSS lol😁😁😂😂😎😎
Nice probes. What is the NEC rating for them?
CE Cat II 1000v 20A
Keep going Alex. One man against to the world!
😯
🤣🤣🤣
👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
21 secs ago is crazy!!
Please keep mentioning that all items are in stock unless the item is not in stock!
👍👍👌👌
من اي بلد انت
I bought some from him that had straight and flexible tips so I guess I don't have the old ones he is referencing. Even at that, the ones I have are the best probes I have ever used
What else?
❤❤❤🎉
Selamün aleyküm bro
I always rest my soldering iron on my probes, lol. Kidding of course but nice demonstration.
All these videos and still can’t figure out how not to have glare on what he’s showing is.
First CMT
first
Love from Pakistan.