Triumph Thruxton 1200 R Oil Change, Reset Service Light
HTML-код
- Опубликовано: 18 июл 2020
- How to change the oil and reset the service light on a water cooled Triumph Thruxton R using TuneECU and an OBD2 Bluetooth adaptor. This procedure should apply to other Triumph watercooled twins as well.
Good tip re: the K&N filter - thanks.
Be careful with the K&N filters...they had a recall a couple of years ago because of leaking oil after tightening with the wrench. If you read the fine print, it says the wrench is for taking off the filter but they recommend tightening by hand. I almost damaged my bike because i didn’t realize it was leaking slowly and only realized when I saw the oil spots in my garage.
I use Hiflofiltro’s HF204RC on mine.
Is that way always. Never tight with the wrench.
very informative video, everything was in detail and the camera angel was perfect....just wondering about the quad lock mount,,,if you get chance , is it possible to get a video on how you mount quad lock for navigation, i heard it's bit of a headache to fit on this bike due to clips on...thank you
Good video, ta.
Way too tight on that oil filter and most likely too tight on that drain plug. Always torque drain plug to spec and for the filter spin it on with two fingers till it's snug and then give it one twist by hand. That's it. Other than that great video.
I believe the K&N calls for 3/4-1 turn after it bottoms out hand/finger tight and that’s about where I’m at. Drain plug is basically hand tight then crushed with less than a 1/4 turn after bottoming out, though understandably it looks like I’m putting a lot of force through that little lever arm of the Allen key set, I didn’t actually turn the plug much. Appreciate the input and constructive criticisms though, thanks 👍🏽
Nice video! Thanks! Can you please share information about paddock and bobbin what you used. I am looking for right paddock to do an oil change/maintenance on my Thruxton R.
Otherwise great video 👍🏾👍🏾
👍 nice
Nice video, thank you!
Can you please list of materials used?
Thank you.
Hiflo filters can also be had with a nut on the end haha
Couldn't really see where the OBD2 port was from the camera angle. Can you tell me where you ordered the OBD2 bluetooth adapter? Still waiting....
what did you do with the old oil
So what grade what tyoe engine oil did you use?
Hello , I got the odb2 , can you tell me which app is the one you used ??
That will help me a lot
TuneECU
amsoil better than castrol?
What's that thing you check around 1:20? That flat ring
thats the sealing ring for the drain plug
Good job man. Do you have a link for OBD2 adaptor?
Paulo J. OBDLink LX OBD2 Bluetooth Scanner... www.amazon.com/dp/B00H9S71LW?ref=ppx_pop_mob_ap_share
Paulo J. It only works with android though, won’t work with iOS just keep that in mind.
@@schrumptiousmoto2551 thank you.
Your kick stand has dented the tail pipe
It comes that way to clear the kickstand I believe
You don't even own a Thurxton do you , because if you did you would know it's there by design