I love their laser modules, I've been using the A40640 laser module for a year and I'm always happy with its performance. Now NEJE has a new E40 module, I heard that it can cut metal, but I haven't tried it yet.
Hello, still wait to get E40 on test, actually it is the same modul as E40640 but it's make to last longer, E40640 can give 10-12w pulsed (that's why neje advice tu run them on 80% laser power max) E40 is secured to not go over 10w, so it should get same power but last long for long time cutting with full power and seriall work.
At this size it would be really interesting to see how well it cuts thicker plywood(8-15mm) with a single pass and with multiple passes, given the size of the cutting area you could genuinely use this for some rather large structures made from interlocking/bolted/glued together pieces(small boat frames, furniture etc.)
@@TinC33 Seeing if it can cut flooring laminate would also be very interesting as it is an amazingly strong and versatile material that is cheap and readily available(basically most things you can make from 1-2mm sheet-metal or 4-5mm alu-plate can be made from 7-8mm laminate)
Hi Sir, @TinC33 I'm using Neje 3 Max Laser Machine on LightBurn Software. My question is: Why is Y axis [Landscape] Burning sharper than X axis (Transverse). I hope you can enlighten me. Thank you, teacher...🙏
Hello you can check for the focus firstly and step settings for line width, you set how narrow y line is it can engrave line each 0,05mm 0,1 or 0,2 for faster engrave...
Are you sure the aluminium frame is 15mm x 30mm V-slot? Is it not perhaps 20 x 40mm? I was hoping to get this machine and the extend it myself because 20 x 40mm V-slot is easy to get where I live. However 15 x 30mm is very hard to find where I live. I look forward to your reply.
My dad has this laser. He has bought an extension kit to make the laser engrave area larger. Do you have any advice on how to change the settings so that the laser can now cover the extension area aswell as the original coverage area ?
I didn't upgrade yet but that should be simply, open neje app on a pc and go to settings menu (gear icon) than simply type new numbers in area size field.
how do you broken them with air assit? sure you can easily replace the modul with a single screw, cable and everithing stay the same, in worst case you'll need to replace the power supply, but i think 4A is enough to run A40640 wich is best laser i try, much better than E40
Hi, amazing things, please can you share what parameters you use to cut 3mm plywood and what distance from laser head lower point to plywood when lens fully skewed in Best Regards Tom
fully screwed lens isn't good for cutting, so try to unscrew for about 1turn and set focus to about 17mm from material to aluminium heatsink, 100% laser power and 10mm/s should cut 3mm plywood in 1 pass.
Hello! Thank you for everything. I couldn't make installation assembly without this video. I couldn't find the settings for brass. I tried tons of different options but still unsuccessful 🥺 Do you know the settings for brass with distance, focal and speed/power parameters?
For that relay, did you end up using it to switch on and off your compressor? I'm wondering if it's okay to just let the compressor run all the time, and let the air-assist relay handle the on/off of the air flow. Edit: I wish I had found your channel before I bought my unit so I could have used your affiliate link! Your videos are extremely informative
Thanks, depend on what type of compressor you use, every basic compressor got preassure switch so it turn on when preassure is below 4 bar and turn off when preassure is about 8bar, so yes compressor is constantly turned on airassist only turning on the air when cutter need it.
Impressive machine! 👍Only you can show us every detail as you reviewed all the previous models and you have the know how after testing so many laser machines. I think you can mount these machines blindfolded...😉or at least you have some skills 6:09
Thanks Isidoro i know subscribers like you want to see some other types of videos, but neje is so happy with my videos and also lot of viewers like this kind of videos, but will come also making stuff for sure 😉
@@TinC33 Don't worry, I know how this work, you do some great testing of this machines and sponsor come everywhere. I can wait for your regular stuff of inventing and machining... and I also started to like laser engraving... and I'm thinking buying one machine at any time... because of you, you planted the seed 😅
Don't beleive all the hype. NEJE doesn't honor their stated warranty. I went thru their "send me a video" troubleshooting 3 times and they said they would send me another control board. Never arrived and wanted me to start over again.. They want you to give up. I would by anything else. I paid $600 and it was worthless 2 months later
Zakaj misliš spemajo, ja dobim jih zastonj, ogledi so super, odzivi gledalcev še boljši, veliko pomagam tudi po mailu in drugih kanalih, prodaja tudi torej win win win situacija, verjamem pa da bi naročniki raje videli da se kaj naredi, sej bo ampak trenutno sem v nekem cudnem obdobju, še tele nejete komaj posnamem ko me zasipajo z paketi 🤔
![NEJE Honeycomb Panel for Neje max, big improvement of cutting [unbox / review / first test]](http://i.ytimg.com/vi/7510n_KLVzg/mqdefault.jpg)
I love their laser modules, I've been using the A40640 laser module for a year and I'm always happy with its performance. Now NEJE has a new E40 module, I heard that it can cut metal, but I haven't tried it yet.
Hello, still wait to get E40 on test, actually it is the same modul as E40640 but it's make to last longer, E40640 can give 10-12w pulsed (that's why neje advice tu run them on 80% laser power max) E40 is secured to not go over 10w, so it should get same power but last long for long time cutting with full power and seriall work.
@@TinC33
Hi Tine. Is there any way to contact you? Cheers
@@lasertools4255 my email is here on yt
@@TinC33
Yea, I already had the idea of looking for it on your channel but I couldn't find it. Thanks anyway.
@@lasertools4255 it's on my info tab, sedejt(a)gmail
Thank you for the review; knowing that grounding helps so much is a big help.
I've been having the same issue, I'm going to do what he did today and see if that fixes it
It should work, mine never stops since this mod, also new version of neje 3 max already got adittional ground wire.
At this size it would be really interesting to see how well it cuts thicker plywood(8-15mm) with a single pass and with multiple passes, given the size of the cutting area you could genuinely use this for some rather large structures made from interlocking/bolted/glued together pieces(small boat frames, furniture etc.)
I will make some more test in video about all the neje laser moduls but still wait on some moduls to get.
@@TinC33 Seeing if it can cut flooring laminate would also be very interesting as it is an amazingly strong and versatile material that is cheap and readily available(basically most things you can make from 1-2mm sheet-metal or 4-5mm alu-plate can be made from 7-8mm laminate)
15:56 better to have a separate cutting head set up properly for the job...
Can a roller be used with this laser engraver? if so which model of roller can be used to engrave on bottles and rounded objects?
Hi Sir, @TinC33
I'm using Neje 3 Max Laser Machine on LightBurn Software.
My question is:
Why is Y axis [Landscape] Burning sharper than X axis (Transverse).
I hope you can enlighten me.
Thank you, teacher...🙏
Hello you can check for the focus firstly and step settings for line width, you set how narrow y line is it can engrave line each 0,05mm 0,1 or 0,2 for faster engrave...
Are you sure the aluminium frame is 15mm x 30mm V-slot? Is it not perhaps 20 x 40mm? I was hoping to get this machine and the extend it myself because 20 x 40mm V-slot is easy to get where I live. However 15 x 30mm is very hard to find where I live. I look forward to your reply.
Hey i just check once again, it is 15x30mm, i also got unpacked extension kit from neje waiting to review.
My dad has this laser. He has bought an extension kit to make the laser engrave area larger. Do you have any advice on how to change the settings so that the laser can now cover the extension area aswell as the original coverage area ?
I didn't upgrade yet but that should be simply, open neje app on a pc and go to settings menu (gear icon) than simply type new numbers in area size field.
Also can do that in lightburn i think machine settings and write x and y size into firmware.
just out of curiosity ive broken my A40630 with air assist, is the A40640 a straight swap by any chance, thanks
how do you broken them with air assit?
sure you can easily replace the modul with a single screw, cable and everithing stay the same, in worst case you'll need to replace the power supply, but i think 4A is enough to run A40640 wich is best laser i try, much better than E40
Hi, amazing things, please can you share what parameters you use to cut 3mm plywood and what distance from laser head lower point to plywood when lens fully skewed in
Best Regards
Tom
fully screwed lens isn't good for cutting, so try to unscrew for about 1turn and set focus to about 17mm from material to aluminium heatsink, 100% laser power and 10mm/s should cut 3mm plywood in 1 pass.
Hello! Thank you for everything. I couldn't make installation assembly without this video. I couldn't find the settings for brass. I tried tons of different options but still unsuccessful 🥺 Do you know the settings for brass with distance, focal and speed/power parameters?
I think it won't work on brass, you can try with some markers, but i think painting and then engrave paint is the only way 🤷♂️
Can you tell me what the black rubber patches are for ?
For stick it under the aluminium leg so if you got it on wooden table it won't slip in case you want to screw machine on the table.
For that relay, did you end up using it to switch on and off your compressor? I'm wondering if it's okay to just let the compressor run all the time, and let the air-assist relay handle the on/off of the air flow. Edit: I wish I had found your channel before I bought my unit so I could have used your affiliate link! Your videos are extremely informative
Thanks, depend on what type of compressor you use, every basic compressor got preassure switch so it turn on when preassure is below 4 bar and turn off when preassure is about 8bar, so yes compressor is constantly turned on airassist only turning on the air when cutter need it.
Is there I chance I could have one of your laser engraver?
order one at neje shop
Impressive machine! 👍Only you can show us every detail as you reviewed all the previous models and you have the know how after testing so many laser machines. I think you can mount these machines blindfolded...😉or at least you have some skills 6:09
Thanks Isidoro i know subscribers like you want to see some other types of videos, but neje is so happy with my videos and also lot of viewers like this kind of videos, but will come also making stuff for sure 😉
@@TinC33 Don't worry, I know how this work, you do some great testing of this machines and sponsor come everywhere.
I can wait for your regular stuff of inventing and machining... and I also started to like laser engraving... and I'm thinking buying one machine at any time... because of you, you planted the seed 😅
Funny the ad was for xtool... Lol....
Don't beleive all the hype. NEJE doesn't honor their stated warranty. I went thru their "send me a video" troubleshooting 3 times and they said they would send me another control board. Never arrived and wanted me to start over again.. They want you to give up. I would by anything else. I paid $600 and it was worthless 2 months later
I hear that neje got issues with warranty, i thing it's bad for such a good brand.
Wow.. they keep spamming you with laser engravers
Zakaj misliš spemajo, ja dobim jih zastonj, ogledi so super, odzivi gledalcev še boljši, veliko pomagam tudi po mailu in drugih kanalih, prodaja tudi torej win win win situacija, verjamem pa da bi naročniki raje videli da se kaj naredi, sej bo ampak trenutno sem v nekem cudnem obdobju, še tele nejete komaj posnamem ko me zasipajo z paketi 🤔
Wtf was you even talking about