LIVE with Mr Steele - Apex EVO 5" HD Quadcopter RTF
HTML-код
- Опубликовано: 1 авг 2024
- GetFPV joined Steele Davis live to look at the epic Mr Steele Apex EVO 5" HD Quadcopter RTF. This HD RTF features the new DJI O3 Air Unit on the amazing ImpulseRC Apex EVO FPV Frame - Mr Steele Edition. In stock and available now: www.getfpv.com/mr-steele-apex...!
ImpulseRC has worked with legendary FPV pilot Mr Steele throughout the development lifecycle to ensure the Apex EVO is up to the high standards of the man himself. The Apex EVO brings improvement to the classic 'True X" geometry for freestyle, videography, and mid-range exploration.
Each Mr Steele HD 5″ 6S Quadcopter RTF is hand-built, tuned, and test-flown in the USA.
Endorsed by Mr. Steele himself, preloaded with his tune and settings.
Features:
Injection-molded Landing Skids on the end of the arms protect the motor during a crash
RTF is fully built and test-flown by our technicians at our GetFPV Florida facility
Pre-tuned with smooth freestyle settings directly from Mr. Steele
Premium Ethix Mr Steele Silk 2307 Motor V5 - 1750KV
Full 3K Carbon Fiber airframe with silky clear coat
Advanced FETtec FC G4 v1.7 Flight Controller
Apex EVO Mr Steele Frame
Custom GoPro Mounting
DJI O3 HD FPV System
True X Configuration
Specifications:
Propellers: HQProp Ethix P3.3 Polycarbonate 5.1" Propellers (Set of 4) - Mango Lassi (www.getfpv.com/hqprop-ethix-p...)
Frame: ImpulseRC Apex EVO FPV Frame - Mr Steele Edition (TrueX) (www.getfpv.com/impulserc-apex...)
Motors: Ethix Mr Steele Silk 2307 Motor V5 - 1750KV (www.getfpv.com/ethix-mr-steel...)
Antenna: TBS Crossfire Immortal T Antenna V2 (www.getfpv.com/tbs-crossfire-...)
Weight: AUW of 415g (excluding battery)
FC: FETtec FC G4 v1.7 Flight Controller (www.getfpv.com/fettec-fc-g4-v...)
VTX/Camera: DJI O3 HD FPV System (www.getfpv.com/dji-o3-air-uni...)
ESC: FETtec 45A 3-6S 4-in-1 ESC (www.getfpv.com/fettec-45a-3-6...)
Receiver: TBS Crossfire Nano Rx (www.getfpv.com/tbs-crossfire-...)
Recommendations:
Ethix Chesty - Tactical Chest Rig (www.getfpv.com/ethix-chesty-t...)
Ethix Prop Tool - 1.5mm (www.getfpv.com/ethix-prop-too...)
Ethix Tool Case (9 Pcs) (www.getfpv.com/ethix-tool-cas...)
Lumenier N2O Extreme 1350mAh 6s 150c Lipo Battery (www.getfpv.com/lumenier-n2o-e...)
Lumenier N2O 1250mAh 6s 120c Lipo Battery (www.getfpv.com/lumenier-n2o-1...)
Chapters:
0:00 Countdown
0:52 Introduction
1:50 Latest with Steele
8:15 Apex EVO 5" HD Quadcopter RTF
19:50 Firmware
23:00 Product Components
31:45 Accessories (Including the Chesty - Tactical Chest Rig!)
55:20 Motors and Propellers
1:04:08 Steele and Cars
1:06:00 Connect with Steele 
Наука
Good Luck ETHIX,.🙏👍... and Mr.Steele Too for sure,....!!😉....... Thank you GetFPV for this video 🙏
Brother man is a legend.
The Chesty is pretty bad ass. Great idea. 🔥
The Chesty confirms it for me - Steele is definately on the spectrum.
The radio "lanyard" should have a side release buckle ("fastex") so the radio can be removed and quickly adjusted for length. I.e. where the tri-glide buckle is you'd put the adjustable SR buckles half and the other half would have the metal "dig clip" attached.
Then the radio can be removed and clipped on anoyher fastex, say to the side or on the back, which would make moving around while not flying easier, especially if you're climbing or something.
You could also do with a water bag and maybe a bigger battery bag which could be attached to the back which will allow you to carry more batteries and at as a counterweight to the gear on the front.
The other thing you'd want is a google case so you can stow your goggles, again especially useful when climbing/moving.
This was awesome 🎉🎉🎉
Came here to see the Apex, left feeling like the Chesty is a must have accessory. Love attention to detail at this tactical level. I'm exactly the same with how I design stuff and setup things for practicality. Just love it all.
Awesome stuff :) High five from Norway
Ethix 4 LIFE!!!🏆
ethix candy cane props.....highly recomended!
REAL BOSS.....SIR STEELE
I have a question? Lumenier has made 2307. Love ethix has there version. Does changing the v3 silk bells to the stout increase 10% power because the difference in magnets. If you have 2 quads silk and stouts, break a silk motor and also got 4 stout bells for 10% power. the 3 silk motors have stout bells isn't the stator still 2345? Does the stout bell make it 1750 or isn't it the windings? Does lumenier have different bells or stator? Should I match stator and bells? With silk and stout for 10%more effective
Are they discontinuing the v4 motors?
Soooo you’re telling me I can fly like Steele for only like $900! Why is this bnf so expensive compared to everything else?
I really think that the FPV world needs a fpv specific jacket
I dunno about payin the extra for the steele version
Getfpv are you going to carry RemoteID Modules?
As more become available they will be on the site in the near future.
Apex flies great but the motor protection sucks
900$ 😮 thats a bit too much
Unless you watched the video at 30:00😂
yeah i agree... but to each there own. (just remember fella'z a $900 quad will NOT make you fly any better or like Mr. Steele!!!) If your new to the hobby, the best advise I can share, is to buy yourself a couple of cheap quads and smash them into the ground "100" times before even thinking about flying a $900 rig! 😜
@@whoopsquadI have watched the entire stream 👍🏻
"PromoSM"
Just a reminder to the new guys, a $900 quad WILLNOT make you fly any better or like Mr. Steele!!! Get your self some $200 quads and smash them into the ground 100 times before going big and getting yourself a Mr.Steele rig!!!
I probably would have given up if it wasn’t for the quality of mr steele build, still works to this day!
I agree to some degree but there is something said to having quality rig but I do think people should learn to build it and learn there dron not just fly a BNF
@@Rckid28 I have the same story from my $400 drone. Crashed countless times and still rips today. These builds with pilots names on them are marked up for nothing... Not saying it's not quality stuff. It sure it, but also who cares what name they put behind it.
@@LZRFPV its assembled in the usa and uses the highest end parts. labor is huge and we aren't even talking about getfpv being able to pay operating costs. if you want to spend 400 on a drone assembled in china with lower quality components go for it, you get what you pay for.
@@trfpvVT this is marked up $300 over consumer prices of the exact parts. That doesn’t account for wholesale or any discounted prices they get on the parts or any margin on the frame (which is probably massive). I bet it takes them one or two man hour or less to build and tune these.