is it possible to self repair the touch screen? My watch touch screen suddenly not working but the screen looks completely fine, no crack no bump no swimming with in, i dry it with rice now the top left touch seems to respond a little bit, from your experience is it a water damage issue?
My watch started doing the same thing. Then it finally just got stuck in a restarting loop. I bought a replacement board on eBay and works 100% now. NOTE I have NO affiliation with this seller other than buying one motherboard for my SM-R820 Look up 4prdirect on eBay
Hi, the max you can do is - to clean connectors and PCB from oxidations. It is a tiny, tiny chance to make it works. Touchscreen replacement is quite a difficult task that needs a lot of tools, skills, etc. Also, I didn't see the touch on sell at all. Better to replace the entire part called the display module.
@@Vrm24com my Samsung watch active was not working anymore, it says IP68 can be wear while swimming but after I forgot to took it off while swimming in the ocean it was stopped working.. is it possible to be fix?
Miguel, o meu estava carregando hoje e ficou com a tela toda branca piscando. Como o seu havia ficado? Qual é a chave que se utiliza para abrir o relógio?
@@MiguelPerescorpio1982 Pelo que vi nesse video, seria uma chve Y00, correto? Ele cita no video a Phillips000, mas não vi ele utilizar ela. Você simplismente abriu o relógio, retirou o cabinho flat que liga um lado do relogio no outro, e jogou secador gelado por um tempo? E ai reconectou o cabinho flat e fechou? Engraçado que está com muita cara de mal contato, porque quando ele quer, ele fica com o display normal, sem uma avaria. Ai eu encosto nele, pego pra mexer ele começa com essa tela branca cheia de linhas horizontais falhando, quase como se fosse uma TV antiga sem sinal. Aparenta ser alguma coisa muito besta.
@@Carone2008 exactamente, isso é apenas humidade. Só abri, desliguei as fichas, que sinceramente são tão frágeis que pensei que já não montaria o relógio novamente. De seguida liguei o secador de cabelo com uma distância de segurança para não queimar nada. Fiquei um tempinho, montei as fichas frágeis e ele ainda piscou nesse dia uma vez ou outra, mas deve ter sido para secar os pinos das fichas... Depois nunca mais, mas uma coisa é certa, nunca mais levo um relógio destes para a água. A minha mulher ficou com este, eu agora tenho um Samsung classic 4, e também não o tenciono levar pra piscina....
I have an active 2 and when I try to turn it on there is nothing but green pixels. Then the screen stays black. Do you know what part I would need to fix it?
My watch screen started touch itself randomly yesterday and today touchscreen not responding totally. Tried factory reset but no luck. Watch working, rebooted succesfully and re-loaded backups itself but still touchscreen not working.
Have the same issue. I've read some tech related forums and it seems to me that the problem is water that got inside somehow. How did you fix your watch?
Hello, the back cover of my watch has pill off then i just fix it with glue. My question is can i still use the water resistant feature of this? Thank you!
Anyone know where can i get the back cover or adhesvie for the back cover for the galaxy watch active 2? When dissasembling, the adhesive gets destroyed and needs to be replaced. It is not mentioned anywhere
You should be able to use T7000 glue for this. It's electronics glue and has a tat more viscosity than other electronics glue. If applied in a neat ring around the case, it should hold water out. Its color is black.
I had a sensor fall out it has a red ring around it and plugs in on the other side. It just fell out the watch. Happen to know where it goes. I can't see it on the video
I enjoyed each second, i bought a Galaxy watch active 1, and this turn off and when I charge it it just vibrates once, i guess is the logic, do you know where could I buy one?
Hi, maybe the reason is in the software or something with the board, without disassembling, checking, inquiring, etc., little can be said. If you are looking for the same watch, there are enough offers in the secondary market. Look at Aliexpres or eBay.
Ideas please? My active watch screen is black. It will vibrate for pairing with my phone. Here's the situation though. My phone sees the watch but when I confirm on phone and try to pair with watch, I can't visibly pair from watch because the screen is black. Any ideas as to what part needs replacing? It can't be the battery bc it's taking a charge. What else can it be?? Thanks
My screen is black. I can pair it to my phone and see battery life and all that. I touch the screen and can feel the vibrations, but see nothing on the screen. Using the phone I have updated the software. I try 'rebooting' it pressing g the buttons, but don't see anything appear to say it is rebooting. Anyone have a similar issue and fixed it?
Привет! Автор подскажите пожалуйста. У меня фантомные нажатия сенсора, а на мои нажатия сенсор никак не реагирует. Почитал форумы и там пишут что проблема в воде, которая попала внутрь. Стоит ли их разбирать что бы просушить? Гарантия закончилась
@@Vrm24com the glass in the middle of the back cover is glued or could it be floating? On my active 2, taking the watch off my wrist during a bike ride, I saw that it was 1 mm out. To avoid damage, I kept the watch and when I got it back it was perfect. So I don't understand if it's a problem.
@@Vrm24com thanks, if my watch is flooded after a swim, is there a chance it will leave, and what ways can i use too drain the water if its dead and i don't have any screwdrivers which fir the screws. pls advice asap, thanks so much, your quite helpful, i follow u and liked the video
Okay, first of all, you don't (after water penetration inside) need to turn the watch on! Second, when anyone (you or a specialist) clean all inside, there is a small chance that everything will work properly and 50/50 that stuff like micro will be damaged by oxidation. Also, if you tried to check the watch, then liquid () + electricity = short circuit on the board.
R u kidding me? I just bought this n can't get it put tog. If u need all these tools they should send them since I'll b paying for it for the next 2yrs
Hi, the owner is losing the warranty. Water resistance depends on membrane and back cover conditions. If the membranes are well, just apply new adhesive/glue to the back cover.
My watch got water in it (even though it's supposed to be waterproof) and I tried opening using this method, but I cracked the razor blade and then gave up.
is it possible to self repair the touch screen?
My watch touch screen suddenly not working but the screen looks completely fine, no crack no bump no swimming with in,
i dry it with rice now the top left touch seems to respond a little bit,
from your experience is it a water damage issue?
same
My watch started doing the same thing. Then it finally just got stuck in a restarting loop. I bought a replacement board on eBay and works 100% now. NOTE I have NO affiliation with this seller other than buying one motherboard for my SM-R820
Look up 4prdirect on eBay
Hi, the max you can do is - to clean connectors and PCB from oxidations. It is a tiny, tiny chance to make it works. Touchscreen replacement is quite a difficult task that needs a lot of tools, skills, etc. Also, I didn't see the touch on sell at all. Better to replace the entire part called the display module.
@@Vrm24com my Samsung watch active was not working anymore, it says IP68 can be wear while swimming but after I forgot to took it off while swimming in the ocean it was stopped working.. is it possible to be fix?
Obrigado! Estava avariado devido à prática de natação, abri e coloquei um secador à distância, está como novo! Muito Obrigado!
Ola. Feliz de ouvir isso! А skillful person can handle any job quickly and well!
Miguel, o meu estava carregando hoje e ficou com a tela toda branca piscando. Como o seu havia ficado? Qual é a chave que se utiliza para abrir o relógio?
@@Carone2008, o meu estava igual. Eu mandei vir um conjunto de chaves de relógio do Ali express por 12€... Depois fui na aventura, está bom até hoje!
@@MiguelPerescorpio1982 Pelo que vi nesse video, seria uma chve Y00, correto? Ele cita no video a Phillips000, mas não vi ele utilizar ela. Você simplismente abriu o relógio, retirou o cabinho flat que liga um lado do relogio no outro, e jogou secador gelado por um tempo? E ai reconectou o cabinho flat e fechou? Engraçado que está com muita cara de mal contato, porque quando ele quer, ele fica com o display normal, sem uma avaria. Ai eu encosto nele, pego pra mexer ele começa com essa tela branca cheia de linhas horizontais falhando, quase como se fosse uma TV antiga sem sinal. Aparenta ser alguma coisa muito besta.
@@Carone2008 exactamente, isso é apenas humidade. Só abri, desliguei as fichas, que sinceramente são tão frágeis que pensei que já não montaria o relógio novamente.
De seguida liguei o secador de cabelo com uma distância de segurança para não queimar nada.
Fiquei um tempinho, montei as fichas frágeis e ele ainda piscou nesse dia uma vez ou outra, mas deve ter sido para secar os pinos das fichas... Depois nunca mais, mas uma coisa é certa, nunca mais levo um relógio destes para a água. A minha mulher ficou com este, eu agora tenho um Samsung classic 4, e também não o tenciono levar pra piscina....
I have an active 2 and when I try to turn it on there is nothing but green pixels. Then the screen stays black.
Do you know what part I would need to fix it?
Hi, what tools did you use to open the smartwarch? What is the size the tool Y?
Y00 size scrudriver
My watch screen started touch itself randomly yesterday and today touchscreen not responding totally. Tried factory reset but no luck. Watch working, rebooted succesfully and re-loaded backups itself but still touchscreen not working.
Have the same issue. I've read some tech related forums and it seems to me that the problem is water that got inside somehow. How did you fix your watch?
Hello, the back cover of my watch has pill off then i just fix it with glue. My question is can i still use the water resistant feature of this? Thank you!
Try zooming in a bit on the subject. So much screen space is wasted otherwise.
Okay we will, thank you!
Hi,
I have an active 2 watch which doesn't charge anymore. Can you tell me where is the problem and how can i fix it?
My back button won't work anymore on my active2. I took it apart but couldn't see anything that was affecting the back button. Any suggestions?
Can u do a video on taking the watch 4 apart? My power button has something sticky in it, need to clean it.
Hi, when we get it we will do it no doubt! but we do not have it yet.
Anyone know where can i get the back cover or adhesvie for the back cover for the galaxy watch active 2? When dissasembling, the adhesive gets destroyed and needs to be replaced. It is not mentioned anywhere
You should be able to use T7000 glue for this. It's electronics glue and has a tat more viscosity than other electronics glue. If applied in a neat ring around the case, it should hold water out. Its color is black.
Tengo una duda, a mi sra se le olvido sacerse el smartwatch en las termas ,aguas sobre los 50 °
Se apago y no sabemos como reparar
Can I access the buttons fromm the inside? My power button is stuck and the watch is now on reboot loop
hi krustijan, after several try, i think ther problem is the same as that u are saying!!! did u fix it ? thanks
I had a sensor fall out it has a red ring around it and plugs in on the other side. It just fell out the watch. Happen to know where it goes. I can't see it on the video
I enjoyed each second, i bought a Galaxy watch active 1, and this turn off and when I charge it it just vibrates once, i guess is the logic, do you know where could I buy one?
Hi, maybe the reason is in the software or something with the board, without disassembling, checking, inquiring, etc., little can be said.
If you are looking for the same watch, there are enough offers in the secondary market. Look at Aliexpres or eBay.
Da Best vines from Mexico ♥️
Boa tarde amigo, onde posso comprar essa tampinha traseira do Galaxy active 2, a minha quebrou?
Oi, é difícil dizer, talvez no site chinês chamado Aliexpress.
Ideas please? My active watch screen is black. It will vibrate for pairing with my phone. Here's the situation though. My phone sees the watch but when I confirm on phone and try to pair with watch, I can't visibly pair from watch because the screen is black. Any ideas as to what part needs replacing? It can't be the battery bc it's taking a charge. What else can it be?? Thanks
Have you tried to reboot the whole watch yet?
Did you put heat to it or you don't have to?
Hi, we did not. There is a lot of everything under the cover, high risk to damage something.
Replace the battery like that, can it still be used with 5ATM water resistance?
it can't, there are water resistance issues after changing battery in Korea
What screw driver
Will you disassemble the Samsung watch4?
Hi, we will definitely off course when find the one.
Witch I could do this on my galaxy watch 2 and take out that Lazer light. It's irritating
My screen is black. I can pair it to my phone and see battery life and all that. I touch the screen and can feel the vibrations, but see nothing on the screen. Using the phone I have updated the software. I try 'rebooting' it pressing g the buttons, but don't see anything appear to say it is rebooting. Anyone have a similar issue and fixed it?
What happened to the battery? And how did you separate the two boards?
Hello, To separate the two boards, you need to unscrew one screw and slide the plastic tabs off that hold the board.
hey I have a active watch 2 and it keeps saying watch needs to cooldown and it wouldn't charge. please help me fix it
I have same problem. Did you manage to fix it... mine broge down in jacuzi
The display of the galaxy watch activé 2 SM-R830? can be work in a galaxy watch activé 1 SM-R500??
Hi, I don't thin so.
Привет! Автор подскажите пожалуйста. У меня фантомные нажатия сенсора, а на мои нажатия сенсор никак не реагирует. Почитал форумы и там пишут что проблема в воде, которая попала внутрь. Стоит ли их разбирать что бы просушить? Гарантия закончилась
Просушил?
@@vk2591 ага, я разобрал и просушил и до сих пор хожу с ними. Действительно была влага внутри. Теперь стараюсь что бы вода не попадала
А часы живы остались? Потому что я только что свои разобрал))
@@vk2591 ну да, остались. Я разобрал и оставил и лежать на несколько дней
thanks so much! I really appreciate this
Can you make a tutorial on replacing the rear glass?
Hi, do you mean the glass in the middle of the back cover?
@@Vrm24com Yes, the glass that covers the heart rate sensor.
Could you also make a video about changing the front glass please?
@@Vrm24com the glass in the middle of the back cover is glued or could it be floating? On my active 2, taking the watch off my wrist during a bike ride, I saw that it was 1 mm out. To avoid damage, I kept the watch and when I got it back it was perfect. So I don't understand if it's a problem.
What's with all the flexing of the hands?
Hi, what do you mean?
what screwdriver type is needed?
Hi, the screwdrivers are Philips #000 and Tri-wing Y00
@@Vrm24com thanks, if my watch is flooded after a swim, is there a chance it will leave, and what ways can i use too drain the water if its dead and i don't have any screwdrivers which fir the screws. pls advice asap, thanks so much, your quite helpful, i follow u and liked the video
@@Vrm24com do u have any advice?
Okay, first of all, you don't (after water penetration inside) need to turn the watch on! Second, when anyone (you or a specialist) clean all inside, there is a small chance that everything will work properly and 50/50 that stuff like micro will be damaged by oxidation. Also, if you tried to check the watch, then liquid () + electricity = short circuit on the board.
R u kidding me? I just bought this n can't get it put tog. If u need all these tools they should send them since I'll b paying for it for the next 2yrs
Hello, is it lose its water resistance if I dissasemble???
Hi, the owner is losing the warranty. Water resistance depends on membrane and back cover conditions. If the membranes are well, just apply new adhesive/glue to the back cover.
My watch got water in it (even though it's supposed to be waterproof) and I tried opening using this method, but I cracked the razor blade and then gave up.
Mm, a nicely stolen video
from who? )