Touratech Aventuro Traveller: The Ultimate ADV Helmet
HTML-код
- Опубликовано: 3 май 2020
- The Aventuro Traveller is an innovative modular helmet designed specifically for the demands of adventure riding. You’ll love that it’s lightweight, features huge airflow, and is quiet even at speed. It’s a true modular which allows you to open the chin bar for easy communication at the gas station or hatching a plan with your riding buddies.
When the ride gets rowdy or the weather warm, you will love the massive airflow that distributes air around your head to keep you cool and comfortable. A helmet’s job is to keep you protected, but a side effect of this protection is often excessive heat for the rider. The Aventuro Traveller solves this problem with a peak design that passes airflow into the oversized vent on your forehead distributing cooling air around your head for comfort in demanding terrain or hot weather. In fact, the flow is so great that the helmet comes with a ‘low-flow’ flap that you can close to reduce airflow for riding in cooler weather.
Further airflow cools the rider’s face by entering through the large chin vent. The glove-friendly vents are easy to open and close while riding.
The Aventuro Traveller is lighter than its predecessor and most other modular helmets on the market. The carbon version is a half-pound lighter than the previous model and the multifiber version is a third-of-a-pound lighter. You’ll notice reduced neck strain and improved comfort for long days in the saddle.
An innovative double seal keeps rain and dust out while reducing sound levels for a comfortable ride. The double seal is crafted from soft rubber which lines the shield closure surface as well as the chin-bar closure area. This gives you better protection from the elements and also reduces wind noise for a more peaceful and enjoyable ride.
You’ll enjoy big vistas with the large range of peripheral vision courtesy of the wide opening. The field of view is excellent, providing more information, whether you are riding in the city or enjoying the wide-open road. An integrated sun visor flips down with a glove friendly control providing you with sun protection when needed.
The shield stays open in 4 positions with strong detents. The lowest opening is designated as the anti-fog mode. Additional anti-fog capabilities come courtesy of the Pinlock insert that can be installed for riding in wet situations. Grip tabs located on both sides of the shield allow easy opening with either hand.
A gravity-defying chin bar stays in the up position until you pull down to close it. No surprise closings at inopportune moments like some other modular helmets. Designed with easy access to the opening mechanism allowing routine cleaning and maintenance for smooth and consistent operation.
Quick-Ratchet buckle with stainless steel mechanism resists corrosion providing quick closure of the chin strap and reliable performance for years.
Stay dry with a cool-max liner that wicks moisture away and provides a soft feel for rider comfort. The neck roll and cheek pads are in one integrated piece for easy removal and cleaning.
The helmet is set up to accommodate most clamp-on style communication systems including SENA, Scala Rider and more. It comes with cavities for speakers and a microphone and easy routing paths for wires making communication installation a snap.
The ‘no-grab’ peak design cuts through the wind nicely minimizing neck strain keeping you comfortable and it comes with an optional extension to block more sun if desired.
The helmet comes with a removable camera mount on top of the helmet so you can share your adventure with friends.
The Aventuro Traveller is available in 3 graphics styles for the carbon fiber version and 2 solid colors for the multifiber version.
Meets the safety standards of a full-face helmet while providing the convenience of a modular.
touratech-usa.com/store/Toura... 
Авто/Мото
Went with the Nexx x-vilijord carbon nomad light because of the x com 2 integration. Also the pointed chin on the traveller helped with my decision. Nothing against Touratech, I rock many of their products! Saved a few bucks by ordering from Europe.
The anti-grab peak works well. The rubber on the lower edge around the perimeter immediately started falling apart as it wasn't sealed thoroughly all around from the factory. I needed to reseal with glue most of it. Same thing with the seal between the chin bar and the main helmet body, had to glue that on both sides ( left, right). Other than that it is well made. The noise level is acceptable but definitely worse than Schubert C3 Pro and C4 Pro but those are slightly different helmets however most of us are coming from the Schubert. I use a nice set of earplugs when riding with this helmet which is what we need to do in first place. Never quite felt that need with Schubert. Overal I am happy. Some getting used to as anything new. Not readily available tinted visor nor tinted pinlock. Maybe Touratech will release some in near feature.
Looks like a great helmet!
Love all your videos, even got my endorsement through Puget Sound Safety. Thanks for all you do!
I really like all the features of the helmet, nailed it on the head for that. But I didn't hear in the video any specifications of safety ratings or safety features on the helmet? I'll look into it further when I'm in the market for a new helmet, I'm sure its good. I really like seeing things like mips and Kororyd, and a DOT is the bare minimum for helmets obviously, but snell and ECE are far better. My next helmet will need better than dot now that I know better.
DOT and ECE approved
Please make a tutorial on how to remove the sun visor
I want one
I didn't see anything as to whether the peak comes off? Tools, no tools?
What does it weigh?
Carbon Traveller Size M = 3.8 lbs, Multifiber Traveller Size M = 4.25 lbs.
Weight?
Carbon Traveller Size M = 3.8 lbs, Multifiber Traveller Size M = 4.25 lbs.
Price?
touratech-usa.com/store/Touratech-Aventuro-Traveller-Modular-Adventure-Motorcycle-Helmet
Basically a rip off NEXX X VILIJORD? What are the pros of this helmet versus that one? Everything looks identical
Not a rip off, it's a joint venture produced by NEXX.
@@TouratechUSA oh wow, my apologies, It just looked SO similar I assumed it was a straight rip off, but it totally makes sense that it is made in collaboration with NEXX, good stuff!
Safety certification ?
DOT/ECE
Look like great helmet but they are very expensive in Canada; they are sold over 1000$ Canadian. At this price point, sorry, but i prefer to stick with my hand made Arai XD4 Snell certified.
@@trekkydelirium-vroom5821 Too bad, they are $649 or $749 currently depending on options in the US. Also, remember that this is a modular helmet where the XD4 has a fixed chin bar.
Touratech USA : no doubt your modular look great & is very tempting but Touratech Canada prices are expensive.
@@trekkydelirium-vroom5821 We're selling the carbon helmet 979.95$ CAD which is the exact same price as Touratech USA price. For sure the exchange rate changes everyday but we're very competitive with US pricing.
Made by NEXX Helmets