i wonder if making the side fan column a toilet bowl style by beveling them in slightly making them also push air towards the rear of the case would dramatically improve cooling
@@CrazyTechLab Cheers Antony. The distro i have is not far off those dimensions. I also have a Dremal and i'm not afraid to use it ! 😁 Thanks again PS loving your content 👍👍
I understand hard disks are not as widely used as before, but removing space for hard disks all together would make no sense. 2 slots is the bare minimum for such a giant case.
Kinda - the problem is the dust filter is right underneath and it has slots that would need to be cut away potentially compromising its supports. The fan mounts are also raised so adding more would likely need washers or something to support the third fan. Alternatively, you could just cut away the entire bottom section and install a custom 3 x 140mm fan grill or something. You can see in the video when I show the underside of the case what I mean.
It's close but if you anchor down the cable with the Velcro ties it shouldn't be too much of an issue. It's close, but if it's secure it should be fine
my current case is a td500 from cm and im thinking of switching to this case since my radiator is to big to fit in better ram, do you think it would be able to fit in this case?
@@CrazyTechLab yeah i started looking to them, and it seems the upkeep and cleaning on them just to much lol. but what worries me is that PSU holder, is it really bad?
@@CrazyTechLab that's what's up. Easily fixed if it becomes a problem, I am definitely excited for t his new case. But it seems I am limited to cpu coolers am4 socket
I still don't trust "airflow" from NZXT had their H510 elite and it might of had the worse airflow I've ever seen from such an expensive case at the time.
There were actually copies from years ago from lesser companies such as metallicgear. They just... plain copies with almost no difference than original.
FINALLY A WHITE H9 FLOW REVIEW !!!
White FTW! 😁
That PSU bracket is RIDICULOUS!
My lunchtime viewing thanks! Have to say it looks awesome - love the seamless glass on front and side. I'd actually like to see a smaller one!
You’re welcome!
One already exists, you don’t have to wait for another copy
i wonder if making the side fan column a toilet bowl style by beveling them in slightly making them also push air towards the rear of the case would dramatically improve cooling
both cases might not be perfect but do enjoy both of them
honestly solid def gonna get this instead of 011 now
how is it
With the bracket removed a EATX Motherboard can fit, now what would the height be from the bottom 360 to 4th GPU Bracket be?
I would have loved this case if there was an option for rgb fans or no fans at all.
Could you fit a 120 fan next to the AIO to fill the gap? Or it wouldnt fit?
where did you connnect the case fans to?
i use the nzxt usb hub gen 3 to connnect the case fans but they won't spin
Does the case include a fan hub? Or do I have to buy one separately? great video!
i have it and i didnt get one so u need to buy it separately
Hi thanks for a great video. What is the size of the front glass? I have a distro sitting here and would like to fit it in this case.. Cheers
49cm x 18.5cm that’s the actual glass section.
@@CrazyTechLab Cheers Antony. The distro i have is not far off those dimensions. I also have a Dremal and i'm not afraid to use it ! 😁 Thanks again PS loving your content 👍👍
I understand hard disks are not as widely used as before, but removing space for hard disks all together would make no sense. 2 slots is the bare minimum for such a giant case.
Looks cool but i think I'll wait for NV7. I need 420mm aio support. Size and price differences are not a deal breaker for me.
are 3 fans from side all connected to a 3 ways splitter?
No they’re loose. You need to connect them to your motherboard or own splitter
Push pull configuration ?
Do you think one could modify the bottom of the chassis with a Dremel to accommodate 3x140mm fans?
Kinda - the problem is the dust filter is right underneath and it has slots that would need to be cut away potentially compromising its supports. The fan mounts are also raised so adding more would likely need washers or something to support the third fan. Alternatively, you could just cut away the entire bottom section and install a custom 3 x 140mm fan grill or something. You can see in the video when I show the underside of the case what I mean.
@@CrazyTechLab Thanks for your time and input I see what you mean, excellent review.
It looks like only 3x120s would fit properly without any extra modification
@crazytechlab did you find the cpu power cable tight and awfully close to the aio fans ? i did
It's close but if you anchor down the cable with the Velcro ties it shouldn't be too much of an issue. It's close, but if it's secure it should be fine
Do u need a specific power supply
Nope any ATX power supply will be fine. Just get what’s best for your other hardware.
Clean lines, but blocking cpu retention is lazy engineering imho.
Yup just swap it with the hdd tray and problem solved.
my current case is a td500 from cm and im thinking of switching to this case since my radiator is to big to fit in better ram, do you think it would be able to fit in this case?
What radiator is it?
@@CrazyTechLab from the lian li gallahad
Can i install strimer plus v2 cable 24
Does the pre installed fans rgb?
On the elite version yes.
is there enough room to do push pull+radiator at the top?
Will check for you in an hour or two
Nope - theres only just over 70mm of clearance so only enough space for one row of fans. The side mount can do push/pull though
@@CrazyTechLab awesome thanks alot
Will this fit the arctic freezer ii 360 air radiator on top since it’s thicker?
There’s 70mm of clearance so 45mm for the rad.
im looking at this, but im confused on the cpu cooler. does it need filled?
The case includes no CPU cooler. The one in the video is an AIO liquid cooler than comes pre-filled
@@CrazyTechLab yeah i started looking to them, and it seems the upkeep and cleaning on them just to much lol. but what worries me is that PSU holder, is it really bad?
@@Thayerman12 It’s a negative point but far from a dealbreaker.
@@CrazyTechLab that's what's up. Easily fixed if it becomes a problem, I am definitely excited for t his new case. But it seems I am limited to cpu coolers am4 socket
i agree with @10:27
does a 420mm aio fit at top or side?
Nope. It's 120mm fans only in the side. A 420 would fit but the lower vent is not long enough. You'd only be using like 380mm of the rad
@@CrazyTechLab alright thanks !
Vraiment classe! J’adore en blanc !❤
Hello can it fit a Asus 4090 oc?
Yes loads of space
Black IO cables 😢 no rubber grommet, no modularity
those fans arent rgb??
Nope not the case fans but they are on the Flow Elite
@@CrazyTechLab h9 elite is with vertical Gpu mount
$160 usd
Williams Cynthia Clark Melissa Allen Sarah
😮
I still don't trust "airflow" from NZXT had their H510 elite and it might of had the worse airflow I've ever seen from such an expensive case at the time.
Esse H9 tem um comparativo contra o Lian O11 EVO no fluxo de ar com fumaça, é esplêndido!
So many of these O11 Dynamic clones appearing lately, YEARS after Lian Li came up with the concept
There were actually copies from years ago from lesser companies such as metallicgear. They just... plain copies with almost no difference than original.
I must say, the o11 design is great and really shows off your PC parts which is what alot of people now want
@@mcod99 I've had one now for about six months. Brilliant case to build in, maintain and it looks great with plenty of RGB
This clone upgrades what lian li lacked in every way. Such a beautiful case and no support bar blocking the front corner.
@@TryllHDTv what an idiotic comment. Go and watch some reviews
Shame it doesn't come with a fan hub. Even NZXT's old H440 cases included one. 🫤