good video, but you need to tell the folks that if your hard drive fails, BOTH of your partitions are useless. it's always a good idea to restore the image to a SEPARATE hard drive and actually boot to it to verify it is working properly. once that is done, you truly have a backup that is ready to go. I even recommend using the ghost/clone hard drive immediately.
This does not image the master boot record...so if MBR was damaged or deleted then partition isn't very useful unless you know how to rebuild the MBR...so I'm assuming this is just meant as backup and not imaging just cloning!!!
Can I use these steps to create an image on an external usb drive and then use the external drive to image other hard drives. I teach in a distressed area in Brooklyn and we have old Dell 270's that I want to reimage. Harold
im wondering the same thing but my reason is i have a big external and i want to back up my external so a can switch raid off from it with out losing data, well maybe i can just burn the files separate, im learning c# and i got alot of photos and working on making my friends band songs
thanks for your video info Miguel... question... is it ok to backup 2 partitions into one partition? like... i have 3 partitions (C, E & F), i want to backup C & E into F, is it possible? thanks in advance BR & God bless
The problem is that this version of Ghost - however good it was in its time - does not knows AHCI, only IDE. So for SATA disks is usable with restrictions - if you want to use it, you must set SATA as IDE and install Windows this way - with worse performance than using it as AHCI. Besides, it can only handle 2 GB pieces of files, so saves the backup in 2 GB pieces (it runs under DOS) Norton Ghost 2003 knows AHCI and handles bigger files, and does not uses DOS any more. Other suggested version that run from boot disk (do not need installing under Windows) are Ghost 10.0 and Ghost 15. The ones between them are step backs compared to these ones.
I did not agree with you. Ghost can do image or clone of information also on disk which is working and has installed OS as AHCI. If you can see disk in menu of the program everything is OK your image will work.
Second shaking cursor is annoying....btw is there any option trim free space? I have new SSD that is smaller, I cannot make 1:1 copy, but "fit" to new partition.
if i backup a 10gb hdd to image what would be the size of image file is it also a 10gb???? something like if i were going to backup a file of 1gb i need 1-2gb of storage ????
Hello Miguel I have a long question....Let me see if I understand something and anybody can comment.....You make an image of the whole OS including the OS+applications that you normally use right...? ok that image that you create which must be pretty big, you use a program to create that image in this case Ghost and then you save that image in a big external drive probably more than 100 Gb..? so why the need to create a partition in the same physical drive...?
Hello Sir i need to create disk to image and i want to restore that image to another slimier system .. i am using windows 7. and tell me which version of ghost i need to use . currently i have ghost 2003 . thanks
and something else that I want to add....the use of an image is not just to restore right,you could use it with brand new computers that need to have the same image as the old computers in a business for example....
hey , i have hiren bootloader in which i tried 2 use norton ghost but it gives an error saying there is not enough ram to create partition .though i m having 6gb ram can u help me through it plss ??
you should not unless your 2 TB is solid state. as that configuration is for a small but fast boot/programs drive and a slower storage drive. Games/programs/ and boot are slow on those big harddisks
good video, but you need to tell the folks that if your hard drive fails, BOTH of your partitions are useless. it's always a good idea to restore the image to a SEPARATE hard drive and actually boot to it to verify it is working properly. once that is done, you truly have a backup that is ready to go. I even recommend using the ghost/clone hard drive immediately.
This does not image the master boot record...so if MBR was damaged or deleted then partition isn't very useful unless you know how to rebuild the MBR...so I'm assuming this is just meant as backup and not imaging just cloning!!!
Can I use these steps to create an image on an external usb drive and then use the external drive to image other hard drives. I teach in a distressed area in Brooklyn and we have old Dell 270's that I want to reimage. Harold
is there any way rather than used visual basic to manage the partition ?
thank you and well done
im wondering the same thing but my reason is i have a big external and i want to back up my external so a can switch raid off from it with out losing data, well maybe i can just burn the files separate, im learning c# and i got alot of photos and working on making my friends band songs
thanks for your video info Miguel...
question... is it ok to backup 2 partitions into one partition?
like... i have 3 partitions (C, E & F), i want to backup C & E into F, is it possible?
thanks in advance
BR & God bless
do we must need to install windows in new drive
before run ghost
Hi AvoidErrors, can you please explain why you ran Norton Ghost as in a Virtual PC ? Can you produce the same outcome when running natively ?
The problem is that this version of Ghost - however good it was in its time - does not knows AHCI, only IDE. So for SATA disks is usable with restrictions - if you want to use it, you must set SATA as IDE and install Windows this way - with worse performance than using it as AHCI. Besides, it can only handle 2 GB pieces of files, so saves the backup in 2 GB pieces (it runs under DOS)
Norton Ghost 2003 knows AHCI and handles bigger files, and does not uses DOS any more.
Other suggested version that run from boot disk (do not need installing under Windows) are Ghost 10.0 and Ghost 15.
The ones between them are step backs compared to these ones.
I did not agree with you. Ghost can do image or clone of information also on disk which is working and has installed OS as AHCI. If you can see disk in menu of the program everything is OK your image will work.
★ Does norton symmetric ghost work after increasing the size of the partition please explain ? ? ?
Second shaking cursor is annoying....btw is there any option trim free space? I have new SSD that is smaller, I cannot make 1:1 copy, but "fit" to new partition.
if i backup a 10gb hdd to image what would be the size of image file is it also a 10gb???? something like if i were going to backup a file of 1gb i need 1-2gb of storage ????
Hello Miguel I have a long question....Let me see if I understand something and anybody can comment.....You make an image of the whole OS including the OS+applications that you normally use right...? ok that image that you create which must be pretty big, you use a program to create that image in this case Ghost and then you save that image in a big external drive probably more than 100 Gb..? so why the need to create a partition in the same physical drive...?
Thank you so much for your video. Can you show me the same but making a Ghost image but on CDs instead of putting on a partition. Thanks Miguel
Hello Sir i need to create disk to image and i want to restore that image to another slimier system .. i am using windows 7. and tell me which version of ghost i need to use . currently i have ghost 2003 . thanks
Can you check if N. Ghost 15 can create "image" (not backup) of windows 10 disk ?
and something else that I want to add....the use of an image is not just to restore right,you could use it with brand new computers that need to have the same image as the old computers in a business for example....
Cesar Ramirez
what about system partition 100MB its not mirrored yaar. Then how will os boot up
i want free version of this software, from where i download ??
i am to run ghost but its not working may be because i did not create partrtaion in windows.
bro what is different between norton ghost and easu backup image and easu backup image free and no need boot with CD ROM what u say about it
I have a question , the destination format should it be in NTFS or FAT format?
I suggest NTFS
hey , i have hiren bootloader in which i tried 2 use norton ghost but it gives an error saying there is not enough ram to create partition .though i m having 6gb ram can u help me through it plss ??
Once I create this image, can I deploy it to several laptops (same model and capacity)?
yes
Is the norton ghost goback its fine
Question,
I got 2 hard drives one is 120gb and the other is 2TB, how can I make the 2TB to my primary drive?
you should not unless your 2 TB is solid state. as that configuration is for a small but fast boot/programs drive and a slower storage drive. Games/programs/ and boot are slow on those big harddisks
sir please tell me when i want to create ghost on ntfs file sys....what i do???
Where i can download this live cd?
error display
A destination volume drive is to be locked 681
what to do? sir
Hi,
how can I boot from D if C is not working, can I chose...
really nice video but sir how to reboot window if my window is currpt
Really helpful video , thank u so much :)
so could you just copy and paste the content of C drive
its wont work
Hey bro how can i make it a .GHO type file...??
yes
can someone please help me to get norton ghost32.exe file?
download link plz
i need Norton Ghost download link
imagine a hacker Doing this to your
hidden ghost System pc :C
Thank you
how to ghost download
hai bro this is prem kumar, how can i create ghost image
Norton goback
Fuck..i ruined my data. Missguided