Weber Spirit Grill Replace Igniter Lighter | 210 - 310
HTML-код
- Опубликовано: 29 авг 2019
- As an Amazon Associate I earn from qualifying purchases.
🔥🔥 Weber Sp 210-310 Igniter Kit: amzn.to/2MMouOi
🔥🔥 Weber Spirit 310 Grill: amzn.to/2ZH1L86
🔥🔥 Weber Replacement Flavorizer Bars: amzn.to/3RK3hlj
🔥🔥 Weber Aluminum Drip Pans: amzn.to/3esO3mn
🔥 Tool Set: amzn.to/3nN9lQC
🔥 Cheaper Tools: amzn.to/3VTgJXo
Are you frustrated watching your grill fail when you need it the most? You've come to the right place! In this video, we'll show you how to easily fix a broken igniter - no complicated tools required. Learn step by step how to troubleshoot and replace your grill igniter so you can get back to grilling in no time. Get your easy grill fix today! #FixGrill #FixGrillButton #FixGrillIgniter
The GS4 Grilling System
The Power Behind The Grill
The GS4 Grilling System sets a standard in the world of backyard cuisine. This innovative grilling system is based on over 30 years of grilling experience, culinary expertise, and most importantly, avidly considering the wants and needs of the people who matter the most - the grilling community.
Each component of GS4 has been uniquely designed for ease-of-use and to provide an unequaled satisfaction to your backyard grilling experience. Promising burners, smoke infused food that grills evenly and consistently, and hassle-free cleanup; you are able to focus on what it’s all about - bringing people together around the grill.
Infinity Ignition
The Infinity Ignition is guaranteed to ignite every time. Backed by a generous 10 year warranty, rest assured that you’ll be up-and grilling the first time, every time.
Weber Spirit Grill Replace Igniter Lighter | 210 - 310
Make sure this fits by entering your model number.
The weber igniter kit is a replacement part for your weber grill
For ensuring an instant start every time
Easy to install
Battery included
Fits spirit 210 and 310 gas grills (with front-mounted control panels) 
Хобби
Faced this potential nightmare, BUT, your first 30 seconds showed me my, hopefully, problem area. The spark generating AA had gone kaput on me, a new AA installed and the sparks have returned. WHEW, thanks sir for the entire video, too. Did I mention, whew?!
Thanks man! My igniter came off during deep cleaning and I couldn't figure out where and how exactly I should put it back on.
Before you do ANY of this....take out the battery, and clean out inner battery area where the -negative battery base sits against spring. I used a Q-tip with alcohol, then a tad of emery paper on one endof a small screwdriver. I put battery back in, and
pressed the button.... *SPARK*SPARK* fixed! I keep my grill covered, and bring it inside in the winter, so it still looks like new after 6 yrs, but still just that tiny bit of corrosion/crud messed things up. Saved me $60 and a lot of time. 🙂
I agree, I had actually put the battery in wrong! Duh, I am the one who took it out in the first place. Please show some grace, I’m a 72 year old female who does all the grilling at my house. I love this grill, mine must be at least 13-14 years old and is still going strong. I’ve replaced the Venturi tubes as well as the burners, but I let a AA battery show me up😮.
The rubber band trick is well worth the like.
Webber makes so much money on these igniters. That’s why you can find them all over the web. My lasted a year before I needed to get a new one
I was a little intimidated by this project because I’m not handy and the instructions that came with the new igniter were incomprehensible to me. Your video showed me how to replace the igniter and restore functionality to the grill in just a few minutes. Thank you!
Thank you for the tip of checking the battery. That worked and saved me time, money and probably some frustration.
I was also about to order a replacement kit, but a new AA battery was all that was needed. Totally forgot it had a battery in there. Thanks!
This is the best video I have seen on this subject. I'm in the process of replacing my igniter and this video covered things other videos did not - like how to remove the push button and how to get that ceramic igniter off. Thanks so much!
Very welcome
Hi thank you for this - I fiddled with the battery and lo and behold the igniter works again! You saved me time and money! Thank you.
Thanks for this video! i tried just changing the black box first and it worked! If I didn't watch this I would have replaced all the pieces- you saved me a lot of time. Thanks!!
Same here
I literally just replaced my switch too and your video helped. I also ran into the same situation with my E310 and one of the knob screws was stripped. However, I didnt need to remove the whole cover at all to replace the button. The instructions that came with the kit made no mention of removing the cover but it does help with lining up the clip to slide into place. Im back up and running!
Great video, before I did anything I just put a new battery in and it worked perfectly.
Great video! I was replacing my burners on my Spirit II and couldn't figure out how to get the igniter off. I did a quick search and picked your video. You told me exactly how it was attached. Thanks! I know have a working grill.
Thank you! I forgot it could be just the battery. Duh! Thank goodness I watched this 1st 😀
Thank you for this video. My sparky thing just stopped sparking. I did not even know there was a battery that can be replaced.🤦🏻♀️ I would have replaced the other parts too if needed. This video is very helpful. Thanks again!🌻
Great vid. Also, check on the burners while you have it all apart. Also, just an FYI- your grates are on upside down.
That was a great demo. Rubber band idea was good too, I use it for my other problematic screws. Thanks.
I just finished replacing the igniter and the black box and I now have a grill that I can start. I can not thank you enough for making this video.
Hey, Joe thank you. I almost contemplated throwing the whole thing away. So glad I didnt!
Great video! Mine just stopped working last night. I didn't realize that the metal chain hanging down inside the cabinet is for manually lighting the grill using a match. That way you can keep grilling until you get the igniter fixed!
Thank you for the video. Turned out it just needed a battery but your showed me where that was as well. I have this same grill and really like it.
Just needed a new battery...I thought it worked on inertia...did not know that there was a battery...scheeeeesh. Thanks
Thanks a bunch. I've been using a lighter (for the last year) to start the grill as I no longer heard the snap from the ignitor. I had no idea there was a AA battery that could be easily replaced. I replaced the battery, cleaned my burner holes and the grill is working like a champ!
Yeah I decided finally to fix my $400 Weber instead of buying a new one and I recorded it. : ) It's worked for a year since like a champ!
Thank You so much for t his tutorial, my ignitor was a bit difficult to get out, but putting the new one in and the switch was a breeze!
You're welcome!
thank you for taking yours apart even though it worked so we can see how it's done. Thank you again
Glad it helped
The Webber Spirit E-310 has a new ignitor kit then the one in this video. I ordered the part this week from Amazon and learned the hard way that it didn't fit properly. I returned it and ordered one resembling the one in this video that worked. Otherwise, helpful video. Thanks
I debated going to amazon as well but my grill was still under warranty so Weber sent me a new kit
Thanks It turns out I just needed to use the ignition box too, so I didn't replace the wiring.
Well done video.
I liked that you mentioned to try a couple other things first because it could have very well been the battery was dead but in my case the whole box, cables, ignitor needed replacing.
Thanks to your video it was a very easy task.
I've got to make sure and NOT tell my wife how easy it was. 🤣
Thanks.
Great vid! Very helpful, no BS, and you're just really good at explaining the process. Thank you!
Thanks so much
Hey, thank you - you made this a very simple fix. Appreciate it!
Great to hear!
Thank you. Looks very simple
It is!
Thanks, got the igniter set and was wondering how the actual igniter went in without having to remove the front....until I saw how easy the front came off...easy easy!
Tank you so much for this great Demo.
Thanks so much! You gave me the confidence to do this
Glad I could help!
Hello! Good video here. I just want to mention that I own the Spirit II E210 grill which is very different than the Spirit E-210 grill shown in this video, where the igniter location and wire length are concerned. The Spirit, which this video addresses, has the igniter button and the igniter module on the same side of the grill as each other and requires shorter wire lengths for the igniter button and the igniter itself. The Spirit II has the igniter button located on the left front side of the control panel and the igniter module (which holds the battery) on the right side under the grill box, requiring a longer set of wires for the igniter and the igniter button. Don't make the mistake I did and purchase the igniter kit for the original Spirit grill (like in this video) if you have a Spirit II grill . As of this comment, the Spirit II igniter kit (Part # 67135) is not readily available online anywhere. I've been going back and forth with Weber about this today via email and it's been frustrating to say the least. They kept trying to make me submit photos as if I needed a warranty replacement. It wouldn't be covered under warranty as the battery corroded. I just wanted to purchase the darn thing straight up. After hours of back and forth, the finally sold it to me. Phew!
Very helpful. Thanks for posting.
Awesome - thank you!
Good vid. Thanks! Also, my LOWES guy told me most times, if the grill is less than 10 years old, WEBER will send you a new ignitor kit FREE. Worth checking on this you may be able to save $30.
Thanks for the info!
So, after watching this video, I decided to figure out why my ignitor was not working. It failed a long time ago and I didn't really look at it carefully as to why. When you go to switch out the battery, while the starter is still connected underneath, check that all the leads are connected securely. I thought they were and they were not. I have been lighting my grill with one of those long grill lighters for years. All it took was to push a couple of wires on and put in a new battery...
Thank you!!!
Thanks man. Perfect video!
Glad it helped!
Thanks.. 😎
Your Video was awesome!!! Thank you. Single female here,, did it!!!!!! :)
You are welcome.
Perfect!! Great Video Thank you :)
Glad it helped!
Very useful video!
Thank you for the video 🍻
Thank you
Thank you😊👌
Great video. Thank you.
You bet!
It worked!
Really well done.
Thank you! Cheers!
Nice job
yea mine failed after 3 years. I actually put mine together originally but my memory aint that good ;-)
Thanks saved me $28 and shipping ....
your welcome, feel free to donate to www.patreon.com/hamradiocq
Thanks a million :)
no problem
I just learned that Weber will replace parts like the burner tubes and such instead of buying with Amazon as I had the tubes ordered with Amazon and found I am getting stuff free with Weber. Call them and see if your grill is covered. Saved me $17......
You save me those $ 17 bucks...jajaja. I called then just now .. replacement part is coming next week for free...👍👍👍
Weber gave my a ten year warranty on all parts
When i replaced the bbq electrode on mine, it sparks but can’t turn the fire on but when i use a lighter manually it will fire it up with no issues. Wonderin why it ain’t working
Video starts 2:17
I haven't used my e-310 in years, so the battery was dead. I got it mixed up with several other propane heaters and such where the battery is behind the button, and I unscrewed the starter button on the front panel. Now I can't get it to spark again (battery replaced). When I took the button apart there was a small metal clip on the end of a plastic push stick. I can't figure out where that goes, or how to get it to stay on when I try to reassemble the button. But it must be needed to make the spark happen. Any ideas?
Thank you. The only part that you kind of skipped thu, was getting the push button out. I was having trouble getting it out on my grill?
It took me a minute or two to figure that out. If you reach behind the button, there are two clips that you pinch together and then you slide it out. You'll see small groves where the clips line up to slide it out
I have an e-210 with the knobs on the side.
Grates are upside down
Any thoughts on what the issue might be if my igniter lights my first burner, but not the other two burners? There is gas flowing to all three burners because I can manually light them with a match.
Crossover tube is possibly clogged or broken.
@@TheGCode thank you! I will look into that.
How long did it last b4 u replaced it?
Probably 2 years
Why doesn't Weber describe how to do it? It instruction for a new grill assembly was awful. Thank you so much.
Does the igniter end side in the groove of the tube or over?
I'm not sure
grill grates are upside down
If your grill is registered Weber will give you replacement parts for free for the life of the grill
I think so
Your video needs updating. You need to remove 4 total screws to remove the front panel. Two are hidden underneath. You also need pliers to squeeze the plastic expanders on the switch so you can remove the existing switch.
YOU SHOWED EVERYTHING EXCEPT HOW TO TAKE THE PLUNGER OFF THE FACE FRAME!!!!!!!!