Have been enjoying ur method of step by step explanations of all ur videos great job no short cuts n you don't leave the thought of something missing... keep up the good work
A little pointer.. always always always buy a resistor harness that you can easily put in under the panel so when you change any LED like blinkers or anything it wouldn’t hyper flashing and especially with the LED lights there is going to an unbalanced power going there and back which will cause the light to burn out fast. That harness took me 10 minutes to put in under the steering wheel.
What a difference. I was going for the most expensive headlight replacement going well over $800. No point. $50 replacement seems to do the same job. Lol
I did the same upgrade a few weeks ago using the exact same bulbs. It was a huge difference. Driving to and from work in the dark I didn't have anyone flash their brights at me. Well worth the $49.99 I spent.
Just got my lights a few days ago, bought them because of this video, thank you. Watching again before I take a crack at it. Update, all done, way brighter! Except now the lights won't go down with the switch off and keys out. lol, there is always something.
Just did the install on mine and I'm having the same issue, you ever find a fix? They go down if I turn high beams on then off. It works but its inconvenient.
Just got my 01 convertible 56k (pewter) I’m going to do something similar and put the pop-ups back on the car 🤦🏽♂️. My brother in law took them out instead of replacing the motors. I prefer the pop-ups😍
Hi Chris very smart move those original headlights were sub standard not owning affect myself I can’t enjoy you takeBeing me along on your adventure thanks much have a great and healthy holiday
Just completed this a week ago. Followed your video to a “T” as it was very helpful. And no kidding...getting those suckers in without removing that hood support was a PITA. But, for the price those are fantastic LED options that drastically improve the ability to see at night. Good find and thank you again.
Great tip on removing the hood positioning rubber mount. Needed to do this on the right side. Also, another learned tip,, After you raise the lights, unplug the main wiring harness to each light. They wont accidentally go down after that. Also, the time I had the parking lights on seemed to drain the battery just enough to where the lights would not go down after the install. I was thinking, WTF. Anyway, started the car up and they went right down. This would not have happened had unplugged the wiring harness as I could have turned the lights off and kept the lights in the up position. Great video though. The LED upgrade is HUGE !!!!!
From the Amazon ad "Notice: don’t fit 1998-2004 Chevrolet Corvette " . I have a 04 and the headlights are just slightly better than bad so I'm not going to mess with them and I don't drive at night anyway. Nice vid.
Great job, sir. I just did this to mine. QUESTION FOR YA....... Does anyone know why the Hi-Beams don't work on the set of upgraded bulbs. I bought an LED Kit off EBAY, but only the Lows will come on. There is probably an electrical upgrade needed or something. Thx!!
Nice Vid, I just started playing with mine before watching your video and I broke my lid for the light cover, soooooo I had to find a replacement which is only $175 + paint which I still have not even gotten a quote on yet. :/
@@mycorvettelife Hey man, 👍liked. I'm looking to buy a c5 and the 1st thing I thought of was changing the headlights to led. Which one's would u recommend? And which are the brightest (reasonably) and also, would you recommend an led (or another) light with a blue tint? Which ones are the best, which are brightest? Thanks for your reply bro.
Been playing catch up on your videos, great stuff Chris!! I also have a 2003 50th anniversary C5, great car, just got my first big jump for me a Borla cat back exhaust, fixed both my headlights with new brass gears, the worm was brass the main gear was plastic, bad design no more headlight problems, ever heard of curb alert? Just installed 2 weeks ago, no more nose hits on parking stops gives a beep warning when your close, great idea anyway love the stuff your doing, see ya next time, Jim
FYI you should have changed the right one first so we can see the difference in the blue and the new one I thought the blue was good enough thank you good job
What was the issue that lights where not coming down or up when u installed the second one? because I am having exactly same issue, when installed the first one, left side on the car, no problem, when I installed the second one (right side, same as you did) the whole up and down got messed up, So I ended taking both new led out, put back the stock halogen lights and all was working right, so not sure what is the issue there, compatibility or something else, because one works fine and the second one screws up the light control
If you didn't figure it out all you have to do is turn your lights completely off and push the signal stalk forward to high beam position...they will go down. You have to do this every time you use your headlights. Not a deal breaker.
I also had trouble getting the passenger side bulbs fully seated into their sockets. Were you able to access the bulb area better removing the top dress piece, or is there more of a trick to it? Did you have to remove any other pieces to get the bulbs fully seated? Would sure appreciate more info on this. I'm about half-way thru a full conversion to LED on my C5.
Used the Amazing link to buy a set of these LED Headlights. They are not the same ones you show in the video. I bought them anyway thinking maybe they were a newer type. Installed one and it did not work. Put stock 9006 bulb back in and it worked fine. Tried the other LED bulb and it did not work either. I guess its possible I got a defective set but both bulbs??? I do realize this video is a couple of years old and the LEDs you used may no longer be available. Just letting you know the link my no longer be pointing to the correct LEDs for a C5. Thanks for all of your great videos.
The C5 Corvette comes from the factory with H9006 Low Beam Halogen and H9005 High Beam Halogens. Looks like the 9006 LED works nicely in these cars. How many of you also replaced the High Beams with 9005 LED's? I wish I could see how bright the car is with both High and Low LED's on at the same time. Been kicking it around to put LED's both High and Low Beams in my '99 Coupe. Can someone elaborate as to the problem with the Headlights not going up and down a little more here. As I read below I see some of you guys sent your LED's back because of the problem.
That is exactly what is happening to me. The light on the driver's side works fine, but as soon as you replace the one on the passenger's side, lights started acting up
Hey Chris, I want to install those exact same headlights. At the sight they want me to buy a "decoder" for $17...what the heck do they do and did you install one? I didn't see it in your video. BTW, love your vids.
Got the lights they are awesome! Had a little problem, the lights would not close after I install the new bulb. It works with one light in on driver side and the old bulb on the passenger side. I tested to see them work. but when I had both new lights in, the Headlights would not close. got any tips? Thanks you
That screw you showed to adjust the vertical height, is that for the headlight door to be level with the hood or to adjust height of where the light shines? Also, how do you do it? Plyers or a tip to a screwdriver?
Be careful! I had to return my led's through Amazon because the wiring circuit "feedback" doesn't allow for the pop ups to close. 2000 Corvette. I didn't want to add resistor so going with white halogens.
Hey Chris, nice video. I'm also looking for led lights for my 1999 C5. Was driving on the autobahn and couldn't see a piece of timber in front of me. Thanks God I didn't crash. What would you recommend, the projectors? Quality is my 1st priority. Thanks a lot and merry Christmas, greetings from Germany, Florian
I will end up changing all of the lights to LED. Just wanted to get these in so it's usable. These LED low beams are brighter than the stock halogen hi-beams.
I definitely just had this issue today. Low beams are great no problem. High beams install just fine like the original lamp but the bulb base doesn’t clear the closing bracket. I bought the 4 lamp set, 9005/9006. Gonna contact lasfit tomorrow to see if they know where this went wrong. For what it’s worth, it’s a great upgrade for the low beams I drove it tonight. I also got the hyper flash harness from corvette envy. I’ll be switching turn signals to led and didn’t want problems there or with the many folks commenting about the lights not lowering due to resistance differences. It’s the right move, less than 30$ and took about 20 minutes under the steering column. Pretty easy.
I’m having trouble with my pop up headlights coming down afterwards. I’ve been reading other posts (here and on the inter webs) with the same problem and they said it was because basically they’re not registering the LEDs the same way as regular bulbs. They said the problem to fixing this was getting a resistor to trick the system into thinking it’s a regular bulb. Have you (or anyone viewing this) had this problem, and if so can you verify and/or provide your solutions?
Just upgraded and my headlights won’t go down unless I hit the high beam switch after turning them off and I have to hold it long enough to have them go all the way down if I let off early they stay slightly open. Any suggestions what I should do or if this need to be fixed immediately or not?!
You need to install a hyper flash harness for led lights under front dash drivers side or add resistors to the lights you installed the harness is pretty easy to install about $45 lasfit or vette lights sell these
Some do, some don’t. It it due to the system sensing less electrical draw from the LEDs vs the old halogen, so the system thinks there is a lamp out. A hyper flash harness should correct this.
I just replaced my low beam bulbs with Lasfit lights and when I try to shut them off and they will not close. Then I noticed the led’s are still flashing very little. Any thoughts???????How
great video thanks, I did the HIR update and they work ok but the base of the bulb has to be modified for installation, I can't find a part for the high beam, do they make these for high beams ?
@@mycorvettelife The fine print states "HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting." This would be an important detail to include, don't you think?
Please read buddy. Great video bud. Thanks. I think i have a pair of leds in my garage and look like the same fittings and connections. Will have a look and if right will save me some cash. Btw made in canada made me laugh by your reaction because ive just removed the door and wing mouldings as i didnt like them and behind them guess what it reads? Yup made in canada. I had the same reaction as you!!! Lovin the look without the mouldings. Really clean and more modern looking. Brings out the scallops on the doors. Cheers. Keep up the good work. Tim from london uk. I own a c5 2001 with 28000 miles. Beautiful. C6 5 spoke alloys. One thing, i watched you lowering video. Tried it but i cant turn the front scews,bolts to lower car. Any advise would be appreciated.
@@mycorvettelife yes we did that. Jacked it up as you did until it started to lift off jacking puck. Seems to be kinda rusted in the bolt shaft. Do you know if it has a head to use a spanner so not just by hand? Thank you for relpying
Nice video lights are great, what number did you for the low beams and the high beams? when I click on the link took me to amazon but there's different model numbers
Nice info and video. I want to add these to my C5. What is the model/part number of the ones you used? Also, any problems since installing? Did you have to readjust the lights?
My Corvette Life I have a 99 I just bought and this will be my first set of to do things. Do the reverse/plate led’s help you with backing up or is it mostly for looks ?
Have been enjoying ur method of step by step explanations of all ur videos great job no short cuts n you don't leave the thought of something missing... keep up the good work
My dad passed away and left me his 1999 C5. Then I found you. Thanks Bro!
Wow 😢
Hope it stays in your family for a long time. 😊
A little pointer.. always always always buy a resistor harness that you can easily put in under the panel so when you change any LED like blinkers or anything it wouldn’t hyper flashing and especially with the LED lights there is going to an unbalanced power going there and back which will cause the light to burn out fast. That harness took me 10 minutes to put in under the steering wheel.
What a difference.
I was going for the most expensive headlight replacement going well over $800. No point. $50 replacement seems to do the same job. Lol
I did the same upgrade a few weeks ago using the exact same bulbs. It was a huge difference. Driving to and from work in the dark I didn't have anyone flash their brights at me. Well worth the $49.99 I spent.
Thank you for this information.
I was going ask about this.
Thanks for the response Chris, I think the C5 was a big turning point for the corvette, great car...
Nice!!!! Going to try this today. Also going to change the high beams as well. Along with the fog lights.
Just got my lights a few days ago, bought them because of this video, thank you. Watching again before I take a crack at it.
Update, all done, way brighter! Except now the lights won't go down with the switch off and keys out. lol, there is always something.
Just did the install on mine and I'm having the same issue, you ever find a fix? They go down if I turn high beams on then off. It works but its inconvenient.
Just completed this install and I have the same problem. Thanks for posting this tip on going to high beam then they'll close.
Nice I did this upgrade earlier this year with the exact same lights on my C5
Been using Lasfit in all my vehicles. Great LEDs and very reliable with way more light output than halogen. Haven’t had one problem with them.
Im going to try them....
Keep us up to date on the life of the L.E.D. lights, or when they burn out. Thanks for the video.
It's been 4 years, I wonder how long those lamp, with built in fans, lasted?
Sylvania Silverstar Ultras are a nice upgrade. Even better, my experience is that they're bomb proof.
Huge improvement!
Just got my 01 convertible 56k (pewter) I’m going to do something similar and put the pop-ups back on the car 🤦🏽♂️. My brother in law took them out instead of replacing the motors. I prefer the pop-ups😍
Chris == "Since we have that part off " ,, I knew that was coming ! 😃😃
Very nice! Thanks for sharing 👍🏼
Wow
What a difference.
Hi Chris very smart move those original headlights were sub standard not owning affect myself I can’t enjoy you takeBeing me along on your adventure thanks much have a great and healthy holiday
My pleasure.
Just completed this a week ago. Followed your video to a “T” as it was very helpful. And no kidding...getting those suckers in without removing that hood support was a PITA. But, for the price those are fantastic LED options that drastically improve the ability to see at night. Good find and thank you again.
Awesome! Glad I could help!
Great tip on removing the hood positioning rubber mount. Needed to do this on the right side. Also, another learned tip,, After you raise the lights, unplug the main wiring harness to each light. They wont accidentally go down after that. Also, the time I had the parking lights on seemed to drain the battery just enough to where the lights would not go down after the install. I was thinking, WTF. Anyway, started the car up and they went right down. This would not have happened had unplugged the wiring harness as I could have turned the lights off and kept the lights in the up position. Great video though. The LED upgrade is HUGE !!!!!
That's a very nice improvement for a kit that only costs $50! Money well spent!
Maaaan, that's a big difference.
Big difference for sure
Thanks for uploading this. Now I'm going to replace the old ones on mine.
Should I have any concerns with hyper flash? Thanks for the video. Looks simple enough to me.
Thanks for sharing. I will be picking up my C5 in a couple of weeks.
Hey Chris that came out very nice. Good improvement.
Thank you
Your videos have helped me so much with my 2004 C5. Thank you and please keep posting!!
The new ones are way much better. I have got to do that to mine also.
Great video and helpful as well when it came to balancing the lights, will do this light mod by December
Absolutely mint content!!!
What a dramatic difference!
From the Amazon ad "Notice: don’t fit 1998-2004 Chevrolet Corvette " . I have a 04 and the headlights are just slightly better than bad so I'm not going to mess with them and I don't drive at night anyway. Nice vid.
Thanks Chris! I'm buying a set for my '99
Looking at doing the same mod, this shows me it IS worth the effort - Thanks!
Great Video. I’m thinking on buying a c5
Great video! Descriptive and enjoyable. Easy to follow
Great job, sir. I just did this to mine. QUESTION FOR YA....... Does anyone know why the Hi-Beams don't work on the set of upgraded bulbs. I bought an LED Kit off EBAY, but only the Lows will come on. There is probably an electrical upgrade needed or something. Thx!!
Cant wait to upgrade my Cutlass exterior lamps!
Nice Vid, I just started playing with mine before watching your video and I broke my lid for the light cover, soooooo I had to find a replacement which is only $175 + paint which I still have not even gotten a quote on yet. :/
Yikes! Sorry man.
@@mycorvettelife
Hey man, 👍liked.
I'm looking to buy a c5 and the 1st thing I thought of was changing the headlights to led. Which one's would u recommend? And which are the brightest (reasonably) and also, would you recommend an led (or another) light with a blue tint? Which ones are the best, which are brightest? Thanks for your reply bro.
Been playing catch up on your videos, great stuff Chris!! I also have a 2003 50th anniversary C5, great car, just got my first big jump for me a Borla cat back exhaust, fixed both my headlights with new brass gears, the worm was brass the main gear was plastic, bad design no more headlight problems, ever heard of curb alert? Just installed 2 weeks ago, no more nose hits on parking stops gives a beep warning when your close, great idea anyway love the stuff your doing, see ya next time, Jim
Thanks for watching! The 50th is a beautiful car.
Thanks, I am doing mine today and now I know how!!
Great video. Ordering the lights now... Thanks!
Wow. About to order these for my C5. Thanks!
FYI you should have changed the right one first so we can see the difference in the blue and the new one I thought the blue was good enough thank you good job
ty sir very much,big help,have a good easter you and yours
What was the issue that lights where not coming down or up when u installed the second one? because I am having exactly same issue, when installed the first one, left side on the car, no problem, when I installed the second one (right side, same as you did) the whole up and down got messed up, So I ended taking both new led out, put back the stock halogen lights and all was working right, so not sure what is the issue there, compatibility or something else, because one works fine and the second one screws up the light control
If you didn't figure it out all you have to do is turn your lights completely off and push the signal stalk forward to high beam position...they will go down. You have to do this every time you use your headlights. Not a deal breaker.
Gotta do that to mine soon!!
I also had trouble getting the passenger side bulbs fully seated into their sockets. Were you able to access the bulb area better removing the top dress piece, or is there more of a trick to it? Did you have to remove any other pieces to get the bulbs fully seated? Would sure appreciate more info on this. I'm about half-way thru a full conversion to LED on my C5.
Do you blind opposing traffic?
Used the Amazing link to buy a set of these LED Headlights. They are not the same ones you show in the video. I bought them anyway thinking maybe they were a newer type. Installed one and it did not work. Put stock 9006 bulb back in and it worked fine. Tried the other LED bulb and it did not work either. I guess its possible I got a defective set but both bulbs??? I do realize this video is a couple of years old and the LEDs you used may no longer be available. Just letting you know the link my no longer be pointing to the correct LEDs for a C5. Thanks for all of your great videos.
All you had to do was flip the harness plug orientation.
Sweeet,this is to be my next improvement on my '04 C5,thank you very much for the info!!
Your car is very shiny. What are you using on it?
The C5 Corvette comes from the factory with H9006 Low Beam Halogen and H9005 High Beam Halogens. Looks like the 9006 LED works nicely in these cars. How many of you also replaced the High Beams with 9005 LED's? I wish I could see how bright the car is with both High and Low LED's on at the same time. Been kicking it around to put LED's both High and Low Beams in my '99 Coupe. Can someone elaborate as to the problem with the Headlights not going up and down a little more here. As I read below I see some of you guys sent your LED's back because of the problem.
That is exactly what is happening to me. The light on the driver's side works fine, but as soon as you replace the one on the passenger's side, lights started acting up
Just wondering if you installed that black stripe yourself.if so how would how would you rate it? Thnx
Why not replace the high lights? Is it because they can blind on coming cars?
Great video,looks great.
I know this is old video but you didn’t have any issues with the LED not drawing enough load and needing resistors or anything?
Hey Chris, I want to install those exact same headlights. At the sight they want me to buy a "decoder" for $17...what the heck do they do and did you install one? I didn't see it in your video.
BTW, love your vids.
Got the lights they are awesome! Had a little problem, the lights would not close after I install the new bulb. It works with one light in on driver side and the old bulb on the passenger side. I tested to see them work. but when I had both new lights in, the Headlights would not close. got any tips? Thanks you
Hyper flash harness
Kool video. What are the bulbs you used for low and high beams. Ty
Check the video description
Any reason you didnt replace the high beam lights? Is it just as easy just need to find the right bulb? Great video! Will be doing soon
I did in another video.
That screw you showed to adjust the vertical height, is that for the headlight door to be level with the hood or to adjust height of where the light shines? Also, how do you do it? Plyers or a tip to a screwdriver?
Did your new lights throw a CAN bus error?
Good video Chris. Tried finding these same bulbs on Amazon to no avail. Question, are you blinding people with these bulbs??
Hey Chris, your engine was made in St.Catharines,Canada
Be careful! I had to return my led's through Amazon because the wiring circuit "feedback" doesn't allow for the pop ups to close. 2000 Corvette. I didn't want to add resistor so going with white halogens.
Didnt work on my 2002 returning them
They go down but you have to bump the high beam function with the lights completely off after you're done using them.
These bulbs have doubled in price since your vid. Wow! Click on your link.
Well that's unfortunate...
They are $50 on ebay lol
Hey Chris, nice video. I'm also looking for led lights for my 1999 C5. Was driving on the autobahn and couldn't see a piece of timber in front of me. Thanks God I didn't crash. What would you recommend, the projectors? Quality is my 1st priority. Thanks a lot and merry Christmas, greetings from Germany, Florian
Radio Flyer
radioflyerinnovations.com/shop?olsPage=products%2Fbi-xenon-aca-headlights&page=1
@@mycorvettelife great thank you 👌
LOL "it's not blinding me at all" ....LMAO !
Hey chris can you make a video on how to install the quadbeam relay?
I’m not sure what that even is. I have a video on the hyperflash harness.
@@mycorvettelife it's a relay that when you put your high beams on the lows stay on too. Making a quadbeam
My lights aren’t going down with these installed, any ideas?
Do you suggest replacing all 4 headlights, if not why so. Thanks
Yes
Why not replace the hi-beams at the same time?
I will end up changing all of the lights to LED. Just wanted to get these in so it's usable. These LED low beams are brighter than the stock halogen hi-beams.
I updated both hi-and-lo on my 2102 Cadillac SRX - massive difference!
Very cool👍
Gracias amigo good video God Bless you !
This is the year 2022. Looks like they stopped making these. How about an update?
Why replace low beam and not high beam?
Hey Chris do you buy all of this stuff and install it for us to see and promote to go by Is it or do you get it all for free Curious
So no issue with base of high beam bulbs hitting closing bracket on headlight assembly?
No
I definitely just had this issue today. Low beams are great no problem. High beams install just fine like the original lamp but the bulb base doesn’t clear the closing bracket. I bought the 4 lamp set, 9005/9006. Gonna contact lasfit tomorrow to see if they know where this went wrong. For what it’s worth, it’s a great upgrade for the low beams I drove it tonight. I also got the hyper flash harness from corvette envy. I’ll be switching turn signals to led and didn’t want problems there or with the many folks commenting about the lights not lowering due to resistance differences. It’s the right move, less than 30$ and took about 20 minutes under the steering column. Pretty easy.
Thanks I buying a C5Z soon and I wanna do this.
Good luck! Great car.
These leds seem to be out of stock most places now do you know anymore that are good and install the same way?
Doesn't seem like it. Supply chain issues are everywhere right now.
Ebay lol
I’m having trouble with my pop up headlights coming down afterwards. I’ve been reading other posts (here and on the inter webs) with the same problem and they said it was because basically they’re not registering the LEDs the same way as regular bulbs. They said the problem to fixing this was getting a resistor to trick the system into thinking it’s a regular bulb. Have you (or anyone viewing this) had this problem, and if so can you verify and/or provide your solutions?
Get a hyper flash harness.
@@mycorvettelife Roger, I almost figured that what I might've been. It's ordered and sending. Thanks for the fast response; I super appreciate it!
I noticed you have a weather salon the front of your hood,I'm wondering where that can be purchased?
Just upgraded and my headlights won’t go down unless I hit the high beam switch after turning them off and I have to hold it long enough to have them go all the way down if I let off early they stay slightly open. Any suggestions what I should do or if this need to be fixed immediately or not?!
I never had that issue.
You need to install a hyper flash harness for led lights under front dash drivers side or add resistors to the lights you installed the harness is pretty easy to install about $45 lasfit or vette lights sell these
I see you did low beam what about high beam? Sonny Living in New Zealand
I have a video on the high beams too.
When you guys add leds on your C5 Vettes do you have problems with the flipping up and down of the headlight assembly
Some do, some don’t. It it due to the system sensing less electrical draw from the LEDs vs the old halogen, so the system thinks there is a lamp out. A hyper flash harness should correct this.
I just replaced my low beam bulbs with Lasfit lights and when I try to shut them off and they will not close. Then I noticed the led’s are still flashing very little. Any thoughts???????How
Sounds like the wiring is in the way of the hinge mechanism.
I agree with the stock headlights being dangerous. I got the projectors.
Wow...what a difference. Ordering some tonight!! Thanks for the tips...how is the baby??
Doing well!
My C5 headlight panels say made in the USA! Lol. 2001 coupe
I just finished this upgrade to my 98 c5 but now the lights will not retract and both of the LED's flicker when turned off. What now?
Sounds like you got bad LEDs.
great video thanks, I did the HIR update and they work ok but the base of the bulb has to be modified for installation, I can't find a part for the high beam, do they make these for high beams ?
www.lasfit.com/products/lasfit-la9005-led-high-low-beam-headlight-bulb-kits-6000k-72w-7600lm-white-light
@@mycorvettelife thank you !
@@mycorvettelife The fine print states "HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting." This would be an important detail to include, don't you think?
Good video. I'm thinking of going to the non pop ups.
Please read buddy.
Great video bud. Thanks.
I think i have a pair of leds in my garage and look like the same fittings and connections.
Will have a look and if right will save me some cash.
Btw made in canada made me laugh by your reaction because ive just removed the door and wing mouldings as i didnt like them and behind them guess what it reads?
Yup made in canada. I had the same reaction as you!!!
Lovin the look without the mouldings. Really clean and more modern looking.
Brings out the scallops on the doors.
Cheers.
Keep up the good work.
Tim from london uk.
I own a c5 2001 with 28000 miles.
Beautiful.
C6 5 spoke alloys.
One thing, i watched you lowering video.
Tried it but i cant turn the front scews,bolts to lower car. Any advise would be appreciated.
Pressure has to be off the spring to turn the bolt.
@@mycorvettelife yes we did that. Jacked it up as you did until it started to lift off jacking puck.
Seems to be kinda rusted in the bolt shaft.
Do you know if it has a head to use a spanner so not just by hand?
Thank you for relpying
Was there a special cleaner for the headlight covers? The difference is very noticeable
I just used some streak free glass cleaner.
Nice video lights are great, what number did you for the low beams and the high beams? when I click on the link took me to amazon but there's different model numbers
9006 for low-beam, 9005 for hi-beam.
Thank you
Nice info and video. I want to add these to my C5. What is the model/part number of the ones you used? Also, any problems since installing? Did you have to readjust the lights?
Lazfit 9006 for low beam, 9005 for high beam. I haven’t had any issues since install.
Would you recommend upgrading the brights also ?
Yes
My Corvette Life I have a 99 I just bought and this will be my first set of to do things.
Do the reverse/plate led’s help you with backing up or is it mostly for looks ?
Your Amazon link does not work.