Ford Edge - How To Change Your Spark Plugs & Ignition Coils | Pass Smog
HTML-код
- Опубликовано: 28 июн 2018
- I performed a tune-up by replaced the spark plugs, I had to remove the intake manifold on a Ford Edge. I need to change the spark plugs and ignition coils to turn off the check engine light. The car was running sluggish and would hesitate, now both problems are fixed. A major tune-up will solve most problems including resetting the check engine light. The car had a few OBD2 codes that got fixed with this procedure. ( p0300)
How To Give Your Ford Edge A Tune Up By Changing Spark Plugs & Ignitions coils
Spark Plugs amzn.to/2MOzbwq
Ignition Coils amzn.to/2tjoD0f
Mechanic Gloves amzn.to/2Khlvw8
Shirt designs goo.gl/Ei2VGM 
Хобби
Thanks to your video I was able to change my spark plugs and coils on my own. Local shop wanted $1,700. Only cost about $140 in parts to do on my own.
Very good video. At 71 years old, I plan to tune-up my 2014 Edge next month. Thank you!
watching again..cause another one went bad....best vid!!!!
Very detailed explanation. Excellent technical video. I'm a 65 yo gearhead and your video is right on the money. Nice presentation, too. Thank you, sir.
I appreciate your comment and thanks for watching.
It is people like you that makes me love RUclips. Great video and very well thought out. I’m not a mechanic at all but I could do this thanks to you. You saved the day!!
That's why I don't go to stealer ships anymore. It's an easy DIY project, just take your time, I replaced mine plugs yesterday & took 5hrs, I took plenty of breaks and used 3 cans of carb cleaner on the intake, don't forget di-electric grease and anti-seize on the threads
Great job on the demonstration. Seeing the parts separately really helps explain and makes it easier to understand what goes where. I’ll probably be doing this next month or so as preventative. No problems now but I’d rather do this when I’m ready instead of when there is a problem that needs immediate attention. I’ll definitely be watching again when I get there. Also great idea to swap coils as a test. Cheers.
I am getting ready to buy a 2011 Edge from my uncle and it is due for a tune up. I have not bought the car yet, but I am glad I watched your video. You do a great job at explaining and detailed about how easy it really is. Thanks for posting this.
Bro, your description of the necessary details was spot on!! Thank you! I watched about 5-6 other vids before I found yours and this one was the most helpful of all. 🙏
Just finished the job. I only needed to replace the middle one in the back but I went ahead and replaced all 6 ignition coils and spark plugs so I wont have to bother with it again any time soon. It was only $75 on amazon for everything. Thanks for the video bro, u saved me a lot of money🙏
Excellent job! I went to a shop just yesterday and decided to check whether this is something I could’ve done myself. Looks like I can! And I will. Rock on and thanks for sharing!
One of the best..well spoken and step by step process video. Once diagnose has been already COMFIRMED.
I'm getting ready to replace all my coil packs and plugs on my 2009 Edge. I just bought this car 6 months ago and right now it has 145K on the clock. I'm a courier and I put 2,000/month on this car. I've been getting little jerks and hesitations at various speeds and they are intermittent. I've not put on a code reader. Given the mileage I'm going with my gut on this one and just doing it as at this mileage point it wouldn't hurt to do it anyway. I do pretty much all my own wond on all my cars but I always go to RUclips when performing a task on a vehicle for the first time. Your presentation is well thought out, delivery is nicely done and comprehensive on every aspect of the task so I give you top thumbs and you, my friend, have earned another subscriber. Thank you!
You just made my life a little easier. I knew it was an ignition coil...but needed this guidance!
Stay safe and thank you!!
Gonna do the #5 coil and plugs on my girlfriend's edge tomorrow. I'm saving this vid. Thank you brother. Great tutorial!
How did it go?
Great job. Nice and slow great explanations on how to remove all the parts just to replace spark plugs. Will be doing this in the future.
Thanks for the video, very helpful! The first video I watched over explained everything and still got stuck at the end and couldn't finish video due to not knowing what to do next, and the second video I watched dude worked through it without explaining anything! Also noticed he took a lil more off then necessary, so again thanks for the video, exactly what I was looking for.
Thank you for a clean explanation on how to put back the intake manifold back on and seeing were the last 3 coils are like wow it's a project to get to that point but thanks man.
This video was very informative and very helpful I just recently purchased a 2011 edge with the same engine and I have been contemplating whether or not to do the spark plug change myself thanks so much for this video it's been a great help
You're a great man, what a brother to have. You did us all a solid by posting this video. Awesome!
I appreciate that!
Best demo!! I’m definitely watching this guy for my how to videos, great job
Followed your instructions and it went great and car runs like new! Thanks a lot. You saved me almost $300.00, I owe you a case of beer!
I'm glad it work and I appreciate you for letting me know. Thanks for watching and you have a good day. The fact that you told me is more than the average person does I appreciate it.
Does it still cost 300$ ??
I like how you had shown the intake off first. Very smart!
Great Job! and Thanks for taking the time to film The Repair Process.
I was about to take my wife’s car into the dealership today when I found this great video. They wanted $1600!
Glad I could be of some help.
This is an excellent video. I have had several vehicles that all seem to have ignition coil issues. For those who are inexperienced diagnosing issues, it feels like your call is literally dying. But its a minor issue. Unfortunately its getting harder and harder to get to the coil packs. Thank you for explaining/showing how easy this can be to do it yourself. Also one other comment, it looks like this is a Ford Edge w/3.5L engine as opposed to the 3.7L. After looking under my hood the components all look the same.
Thanks for watching and I appreciate the tip on the engine size. You have a nice day I appreciate your time.
Great job! I appreciate the slow breakdown of the process I'll be tackling this job tomorrow morning got all the parts!
Your video is very easy to follow compared to others. Thank you!
Thank you, I was trying to get the intake manifold off of a Lincoln MKS. Very helpful.
Excellent tutorial!, Clear, precise, and to the point.
Well produced. Used real wrenches ( pro videos use power tools...hate that). Excellent..lay person understandable. He makes it look totally feasible for the back yard mechanic. Excellent editing.
Great job! Thanks. Check engine came in blinking. Auto zone reader said ignition #6 issue. Your video was perfect. I replaced the coil and disconnected the battery. No light. Runs well. Thanks.
Glad I could help thanks for watching.
You should do online tutorial for a living. Followed you step by step with absolutely no problems. Thank you
Thank you for your video. You're accommodating, and it is a very detailed explanation. Once again thank you so much
Thank you so much for taking the time to explain this! 😊
Holy Moly! Thank you so much for taking the time to make this video!
Great job I have one to work on it's a 2014 this Sat. Thanks
Let me know how it turns out and thanks for watching.
Great Job bud! I'm with you, my dealership gave me a $650 quote.
Nice job. Thank you for sharing this information.
Getting ready to go to the garage and do this job. Thank you for answering all my questions.
You're welcome and let me know how it turns out.
@@oxmanagain It went well. I actually have a 2008 and I already have a K&N cold air induction, so I did not have to take off the airbox. But it was similar enough that I knew exactly what needed to be done from your video. The big thing is that I never would have found that bolt under the throttle body (big thank you). I used your safety tip and covered the intake openings with a towel. I have also heard that the back ignition coils can fail sooner than the front because of the heat they are exposed to so I moved the front ones to the back and back to front. Thanks again.
Nice job - very clear and easy to follow
excellent video !!!...thx 4 putting this up
Really good demo video!
Great video. I appreciate the simplicity.
Great video. Thanks for posting, I'm going to do this on a 2010 now.
Good video, but you forgot to secure the coil lock tabs on coils 5 and 6, just saying. I just got done doing the dreadful water pump replacement on my Explorer Sport 3.5 (Ecoboost) and now my daughter Edge needs a rear bank coil. This intake is much easier to remove; thanks for making this video.
Great video and super helpful! Thank you 🙏🏻
Make sure you torque to factory specs. Intake manifold bolts are 89 inch pounds and there is s specific sequence to tightening them to guarantee the manifold does not warp. Even the spark plugs have a torque spec. I believe it is 11 ft pounds. You can find the specs/sequence online.
Thank you for the very detailed video!
Very informative! Great helpful video.
Thank you for your great video and saving me $600 in labor
Excellent video. Very easy to follow.
Great video, thank you! 🍻
Great video man really helped me!
Earned yourself a follow my friend. Nice work!
Awesome video very detailed and very well demonstrated. Thanks for sharing it.
I appreciate your comment. Thanks for watching.
Owsome very good video I really thank you. I hope the procedure is the same on Ford Edge 2007.
Yes that is a lot of money and thank you so so much for creating this very detailed and outstanding video.
You are so welcome!
Amazing video!
Great Video! Might be able to save myself several hundred dollars thanks to you. Thanks!
That is the reason I made videos. I like to save people money and show people that they can do the work themselves. Thanks for watching and hope it works out for you.
Thanks for the Video excellant video very well done gives mee the confidence to wont to do my own ,im Happy you saved your sister some Money as well. Great Job!
thanks man great vid
Great job Brother
Well done vey helpful
A good video how-to!
Probably only help that could / should be mentioned is torqued needed for tightening. Sequence of tightening and "warnings" are well identified.
Nice video man good job!
Thanks, I appreciate your comment.
Good Job!! Thank You.
How do you feel about using the aftermarket coil packs from Amazon vs the OE ones from the parts store?
How does that hose in the back unclip the one in the very back that goes on first how does it unclip please
Great video.
So you pointed out the ignition coils 12345 and 6 but my reading came back EC and F, is it safe to say that would be 35 and 6? I plan on replacing them all I was just curious
This guy is good
Thank you!
Would it be smart to replace all 6 coils and plugs at 100,xxx miles we are getting that cyl 4 with engine light for the first time
Good job
I need your assistance on some of the same issues in my Ford edge 2011 sport is doing. It’s also running with hesitation taking off at stop sign stop light go on up and down hills have no power. I had the spark plugs and a coil or two changed I’m not sure what and which one they actually did but I too would like to perform the same procedure you just did here. The only issue I have is not knowing the correct spark plugs to change out I did go onto Amazon and found the right coils that I needed. But I also have no engine light coming on so it’s kind of tricky because we thought it might’ve been a throttle issue. But I’ve had a throttle cleaned out and worked real good for about a couple days and then it started back up with the same thing. Is it anyway you can get back in contact To help me with this issue thank you.
Great video ✊💪 God Bless
thanks for the video , going to do the same thing this week only difference is I'm not putting back the rubber covers . I find them pointless , if anything its blocking the heat from escaping
Let me know how it turns out and thanks for watching.
Thank you
will this be the same for a 2006?
u earned a new subscriber sir! :D
I appreciate your support and thanks for watching. Did this video help you out?
To some extence yes, but mainly I like the fact that you really make good educational videos for people that do not know much about cars. Keep on making what u do! :D
That is even a better reason. Again, thanks for the support and because of comments like yours it makes uploading videos worth the time and effort.
No thank you mate! You are the one producing great educational content!
Thanks
You can get a magnetic spark plug socket autozone for 15$ best money I ever spent
Bravo!
Love your videos... I know this isn't a Land Rover video.. but I have to ask... did you recently put your LR3 up for sale?
No, no, no. Today the family and I just used it to go to the beach and take or bikes. Thanks for the support.
Did you have to disconnect any of the battery cables prior to disconnecting any of the harnesses?
Yes, I did.
do u know anything about 20013 jeep commanders 5.7 Hemi engines?
Sorry.
Yea, def not paying $550 😂 thanks for the video!
How long should this take from start to finish?
It took me roughly 2-3 hours but I was videoing.
sounds like my issue but do not have engine light
Yes it was.
I changed two of them and its still doing the same thing
Did you have an OBD2 code?
which engine is this?
I believe it's the 3.5 l v6. It's my sister's car and she has had three of them since this video.
@@oxmanagain I have the 2016 MKX 2.7L engine. Since it is a turbo the air intake is a bit more twisted. Also I hope you’ll get the chance to show how to replace DI injectors. Thanks for this video though, very well executed.
14:21 obviously works nascar
🤗
Its called the Heads..
Why didn't you just make a video taking it off from the car???
It was too hard to show the location of the bolts before I took it off. Very dark it would have been hard to record and show everything.