Complete overhaul? Should be complete disassembly. Was the best video until the end, Should have gone the distance and showed the cleaning and regreasing then reassembly. Then call it complete overhaul.
There are some instructions here - electricbike.com/forum/forum/knowledge-base/motors-and-kits/bbshd/22903-bbs02-clutch-replacement, with the tricky part illustrated in the video above at: ruclips.net/video/Pt0n1fVPXQk/видео.html. I am currently replacing mine. Looks like a common fault / weakness.
Good morning , I did not understand how the motor drives , because it is linked to a plastic gear that is silly , it does not hold , as it has an internal bearing .
hi and thanks. how come my bafang bbshd can't do that steep trick up the stairs timeline 0:10. Did you change some settings in the software - if so what did you change? thanx
Hello and can change the flywheel pin!?? I have to change the 100mm one and put the 68mm. Can it be done,!?? On my mountain bike frame it's not good. Not because I have at the right measures because of the wagon that I have 148×12 mountain bikes. The chain works badly too crooked. Even centering a doc with a special belled crown does not go the chain work is too hard at v9licita 10-11 so it works well only up to 9. My bottom bracket frame is 90mm so I bought the 100mm BBSHD wat 1000 I'm looking for compliant frame but neither aliexpress nor year frame sellers way to help me. Would you know something for me,??? Please can you help me I'm trying to realize a dream of my life with so many sacrifices
Hi friend! My BBS 02 is hiccuping when I use pedal assist. It cuts the motor and engage again (less than a second). I suspect that the pedal assist sensor is failed. I bought a replacement but don't know how to change it. Do you have some video where you remove the pedal assist sensor? Thanks a lot!
@@smallhatshatethetruth7933 it's hard, say in 44/13 and slight incline it's literally impossible, yet on other bikes loaded with 10kg of weight in similar gear it's much easier.
Hola amigos des spain, he comprado una unidad del ultra max G510 y no tengo la araña para adpatar platos, saben donde podría conseguirla? ahora no tienen donde lo compré que es en CN-bikes de china. Mi deseo es poner dos platos uno 38T+52T. para utilizar en montañas y tambien en carretera. Muchas gracias por su ayuda!!.
is there a chance that i might have grease too much my bbs02 and the grease got on the PAS? I am having strange problems with my motor, and no one can tell me what it might be! ruclips.net/video/lwyzp5ehjec/видео.html Now the battery indcates RED! and back to Green again randomly! But i cant use either throtle or pedal assist to make the motor move any more.
Thank you for loosening all the fasteners first. It makes the video go so much faster.
wooo! amazing video with clear image quality and explanations. Thanks for your work!
That video was well thought out. Good job guys.
Nice job! The most detailed explanation I've found, thanks!
Complete overhaul? Should be complete disassembly. Was the best video until the end, Should have gone the distance and showed the cleaning and regreasing then reassembly. Then call it complete overhaul.
Excellent!!!! I needed this video
Very nice video. Very clear and to the point.
Taking it apart is easy. How about a video demonstrating re-assembly?
Play video in reverse
Can't get the motor side off with a mallet on mine 😩😩😩😩
Great video, thanks for sharing.
One of the few I've found that show the whole process!
Shouldn't you wash/clean the motor before disassembling?
clear instruction... Can you do a video on replacing the BBS02 750w clutch/freewheel..?
There are some instructions here - electricbike.com/forum/forum/knowledge-base/motors-and-kits/bbshd/22903-bbs02-clutch-replacement, with the tricky part illustrated in the video above at: ruclips.net/video/Pt0n1fVPXQk/видео.html. I am currently replacing mine. Looks like a common fault / weakness.
Good morning , I did not understand how the motor drives , because it is linked to a plastic gear that is silly , it does not hold , as it has an internal bearing .
Hey mate I took the magnet out and the bearing came out with it is this normal?
To remove top of syntetic gear, use M4 screws on two holes on top.
hi and thanks. how come my bafang bbshd can't do that steep trick up the stairs timeline 0:10. Did you change some settings in the software - if so what did you change? thanx
Using a derailleur on the back wheel. Low rpm high torque. Maybe he has got 7-10speed on the back wheel.
Why did you not remove the entire motor from the bike before disassembly?..
Hello and can change the flywheel pin!?? I have to change the 100mm one and put the 68mm. Can it be done,!?? On my mountain bike frame it's not good. Not because I have at the right measures because of the wagon that I have 148×12 mountain bikes. The chain works badly too crooked. Even centering a doc with a special belled crown does not go the chain work is too hard at v9licita 10-11 so it works well only up to 9. My bottom bracket frame is 90mm so I bought the 100mm BBSHD wat 1000 I'm looking for compliant frame but neither aliexpress nor year frame sellers way to help me. Would you know something for me,??? Please can you help me I'm trying to realize a dream of my life with so many sacrifices
Hi friend! My BBS 02 is hiccuping when I use pedal assist.
It cuts the motor and engage again (less than a second).
I suspect that the pedal assist sensor is failed. I bought a replacement but don't know how to change it.
Do you have some video where you remove the pedal assist sensor?
Thanks a lot!
My brand new unit is doing the same. Any resolution?
Nice video! I will use it as a reference for greasing the gear at 02:13.
Is large amount of resistance normal when pedalling with motor off? It feels like riding through treacle
still easier then a tongsheng but yes it is normal, I don't mind riding this motor with assist off
@@smallhatshatethetruth7933 it's hard, say in 44/13 and slight incline it's literally impossible, yet on other bikes loaded with 10kg of weight in similar gear it's much easier.
what size of lock ring pliers?
Gonna need a reg?
Is it me or are those crank arms 4 inches long ? shortest ones I've ever seen
my motor wont slide out the frame!!!! Ideas?
desvio - great help, thank you! and well put together!
That spindle on motor are made from a weak alloy and break as i found out 3 times
Really cool and funny vid! I love it (thumb up) my kids love the music and the jumping part :)
My bbs02 just seized and it won’t move even with me putting foot pressure on the crank arms. Any idea what might be broken?
Your legs?
might be a broken jammed nylon gear
Hola amigos des spain, he comprado una unidad del ultra max G510 y no tengo la araña para adpatar platos, saben donde podría conseguirla? ahora no tienen donde lo compré que es en CN-bikes de china. Mi deseo es poner dos platos uno 38T+52T. para utilizar en montañas y tambien en carretera. Muchas gracias por su ayuda!!.
Excellent 👍
is there a chance that i might have grease too much my bbs02 and the grease got on the PAS? I am having strange problems with my motor, and no one can tell me what it might be! ruclips.net/video/lwyzp5ehjec/видео.html
Now the battery indcates RED! and back to Green again randomly! But i cant use either throtle or pedal assist to make the motor move any more.
Top video. Thanks heaps boys
Bike shop? Those don't exist around here....
8:37 best part
2:43 "Butt connectors" we call them "bullets connectors" in English a butt connector sounds a bit too gay!!
I did snigger when he said 'butt'.
You are so cute mouthed..
Do not follow this video for your own tear down and rebuild. You will end up lost and frusterated. These guys are a joke.
this is BBSHD
NON METTONO MAI ABBASTANZA GRASSO
What a mess, a very disorganized and dirty way to open any motor, stuff being thrown here and there, dirty motor, just a mess!