Это видео недоступно.
Сожалеем об этом.
Will 24x14s with 35s fit on a STOCK Ford F250? [RUINED]
HTML-код
- Опубликовано: 21 янв 2020
- POWERSTROKE STAGE TWO KITS HERE: bit.ly/stage_t...
POWERSTROKE STAGE ONE: bit.ly/STAGE_1
Do 24x14s with 35inch tires fit on a stock ride height ford f250? Today we test the limits to see if this is a possibility.
We finally have the correct lugs and its time to install the wheels. Unfortunately we run into other issues. What do you guys think of the spiked lugs??
1️⃣ MD FLAG HAT:
bit.ly/Flag_hat
2️⃣ Follow me on instagram:
/ corey_mdco
3️⃣ Powerstroke Parts:
bit.ly/606whp
4️⃣ Camera I use:
amzn.to/38zO2nV
5️⃣ The Best Foam Canon
amzn.to/333Drkd
tags:
6.7 powerstroke
6.0
6.4
5.9 cummins
diesel
duramax
turbo
twin turbo
diesel cold start
built diesels
You should just get a 2.5 or 3in. leveling kit for it man. It will give it a better stance anyway in my opinion.
People always gotta put there 2 cents in about other people’s trucks lol.
Those wheels are awesome man, I love the stance! If u get a leveling kit, go with the ready lift 2.5. It’s a super nice kit.
B Rad or bds
Looks sick af! I agree a level kit should fix you rub issue. Maybe a 1.5 or 2 inch for the rear just to keep a little rake for hauling stuff around. Check ur wheel bearing when u do ur tire rotations, them 14 wides will put quite a bit of stress on them. Badass truck man!
Why wouldn’t you just put leveling springs in it or spacers it’d be perfect
Had the same truck with same set up. Just do a ready lift 2.5 inch leveling kit. Will clear the cab you may still have to do minor bumber trimming.
Slap in some new bushings, add a dual steering stabilizer, make sure the PSI is set to your trucks recommendation, and rock the hell out of them 24x14’s lol
11:06 your the man )
I liked the factory 20s
Needs a leveling kit and maybe wheel lights and it would be perfect
This is why the higher offset wheels are a doubled edged sword, they look good but they rub more. BUT They look good lol
Btw that ball joint going bad is the main cause of the death wobble.
Truck looks good with the 24s!
They make front bumper spacers. I still rub with an 8” lift with 37s. Running 26x14s
Take them off and put a leveling kit on first. Looks good
Not a fan of the super wide wheels & tires at all.
The other thing I saw wrong was the hub caps are keeping you from using your locker for the 4x4
You don't have to touch the hub anymore, it has an auto setting so it's all done from inside now
Should goto 24x12s and change the offset. Level it and keep 35s. You live in PA too and I always got shit for tires sticking out close to the 3in limit.
The tires are 35x12.50? Or 35x13.50? I do really like that tires looks like .. I’m wanting to do 35x13.50 on my f250 but wanna know what’s on yours
You should get a 2 inch leveling kit, you wouldn’t have to trim as much
I rolled my fender and bumper in and it works awesome!!
hahaha the install of shame
Furry makes a really nice tire and it’s a 33.14.50 and you won’t have to put a leveling kit on it at all
3.5” ready lift bud👍🏼
The install of shame 😂
My buddy ran a 3” leveling kit on his 19’ f250 with 24x14’s on the new 10 ply nitto 420’s and he didn’t rub at all, maybe try a leveling kit and go down a tire size?
Thanks for the info!!
Modern Diesel Corey no problem brotha! Thank you for the response 🙏🏻🙏🏻
I'm from Pittsburgh and boy are the cops gonna love you 😂 looks bad ass but should've just went 22x12
did you go with the 14.5x2.0 or the 1.5? you mentioned both so i am confused what will work with the F250s
2.5 level my guy
But what offset are they? That's what makes it not clear!
Man you got nice truck big dog man level it won’t change the way it drives at all
driving it would suck needs a leveling kit that should fix it .
Do you know what offset those wheels are? I'm looking to get some wider wheels.
Love your content! But you need a new set of golf clubs man!
Are you gonna sell your stock wheels
Fabtech has the kit to fit 40s with no lift on Superdutys.
U think on 33s it would still rub or not as bad?
think 12 wides on 35s would fit with a 3 inch level on a 05 f250?
Yes they will fit i just did it to mine on stock suspension they rub only at full turn
Purchase a chain steering wheel and curb feelers to keep the vatto look......stock wheels looked better with 35’s wrapped around them.
Beautiful just barley hitting the cab
I wouldn't cut it or roll the edge, lift it a bit
Dude like you’re vids but those wheels like they ought to go on a brothers cutlass
if they don't fit a 250 i doubt they would fit a "brothers" cutlass
Bumper spacer kit.
Hell on hub & bearings but if you're going for the Douchebag717 look, nailed it 👍
Where did you get the lug nut set from?
Ever had the death wobble on this ? Looks sick tho
When my factory tires were getting wore down pretty good I had some serious death wobble. Not since though, but that lower tie rod end being bad is for sure not good. Also the bushings in the track bar wear out and can cause issues
Modern Diesel Corey thanks for reply , I have a 19 , and still having some issues , factory tires as well . They replaced steering stabilizer but still issues . So just a bit lost on what to do next .
you can shim the front bumper out !
Just level the front with the back cus it looks weird
Think 12 wides would rub bad ?
-44 offset
Did you get any of the death wobble probs associated with the ford?? I have a 2019 with 8k on it and I get it sparingly and when I do “LORD HAVE MERCY!” The shaking is horrible, I took it to the dealer and they say they’re correcting the problem with a steering damper but it’s on backorder 8-9weeks out idk kinda weird that they say that’s the only corrective measure needed.. what you think???
I say leveling kit and less headache
4” procomp rides better than stock ride. Doing 12 wide -44 with 35x12.5 only requires trimming the bracket on the bumper.
Lifting 8x6
My 11 F350 On 37x13.5x20's rub with a 6 inch lift ... #Nolockgang
Level it bro
I want the lugs
I think leveling kit.
Damn lol I had to cut so much just to clear 12 wides on my 150
Do u have any picture of doing it little anxious on doing mine
jonah normand look at stxballin on instagram
Ya but that's a f150 u can clear those on the f350 for 17+ pretty sure
jonah normand yea that’s why I said on my 150
Wheels & tires look so f##kin dumb !. If you wanted a low rider you should’ve bought a 64 impala !😂
Low rider would mean it's "lowered". 🤷🏼♂️🤷🏼♂️
i was gonna say the same thing
What’s the offset on the rims?
Thomas Garvey probably -76
Sick ride sick rims=sexy as hell!!!
AnyLevelLift
Those wheels gonna ruin the fresh paint
2.5 inch lift man no need to cut the cab
And if you did 33 furrys it would ride better bec the 35 is just so massive
But it is nice tho the whole truck
Completely nuts. Safe, but nuts.
Clean the truck atleast shit fire
I'd take them if nobody else wants them 😂 seriously though lol
I think those might just fit my 06 e350 that I'm going to be diesel and 4x4 swopping this summer I have multiple projects I'm about to be buying my uncle's old square body Ford possible think it's a 78
You can always tell when guys are really a female waiting to get out 😂😂😂
Wow, it looks terrible
Don’t cut up your truck bud
Is this a joke? If you’re looking to destroy your ride quality and front and components there you go
Nah it’s not a joke. It’s just awesome
Just level it please 😂 will look better
What is the point of a big 4x4 that you can't take off-road?
Horrible look!!! Throw them wheels away!!!
theyre fire idk what you talking about
lol this is so ridiculously stupid its awesome!
What's the point of this video? putting on wheels that are obviously too big then realizing they don't fit??
😭😭😭😭😭
Never understood why folks want to make their truck look like a giant roller skate. It looks bad, it’s illegal in a lot of states and the tires throw road debris on the vehicles behind you.
Not a good look
This looks like an amateur stupid and futile gesture. A pro would have made the truck into a low rider to totally destroy any inherent usefulness.
That's looks terrible 😣
They look awful lol
Way to ruin your truck bud!
🤢🤮
Looks like shit. Ruined a good truck. .