Rebuild Carburetor - Johnson Evinrude OMC Outboard
HTML-код
- Опубликовано: 19 окт 2024
- This video details how to disassemble and rebuild a vintage 1959 Johnson QD-20 10 Hp Outboard Carburetor.
This video is also helpful to those interested in rebuilding 1950's or 1960's 18 horsepower FD series carbs or 1970's 15 horsepower carburetors.
Essentially all 50's, 60's and 70's Johnson / Evinrude carburetors are rebuilt like the one shown in this video therefore I have provided easy links to the respected rebuild kits on Amazon. At the very bottom is a link describing in detail how to tune, set, or adjust your newly rebuilt vintage Johnson / Evinrude carburetor.
Make sure to bookmark my new website thisoldoutboar...
#ad As an Amazon Associate and member of the eBay Partner Network I earn commissions from qualifying purchases using the links below.
**** CARBURETOR KITS ON AMAZON ****
HP YEAR
5 1965-1967 amzn.to/2Moiac9 18-7043
5 1968 amzn.to/2sUi9Vg 18-7024
5 1984-1985 amzn.to/2MoOX0Q 18-7223
5.5 1954-1967 amzn.to/2Moiac9 18-7043
6 1954-1979 amzn.to/2Moiac9 18-7043
6 1968 amzn.to/2sUi9Vg 18-7024
6 1984-1985 amzn.to/2MoOX0Q 18-7223
6 1986-1996 amzn.to/2MoUAfp 18-7219
7.5 1955-1958 amzn.to/2Moiac9 18-7043
7.5 1982-1983 amzn.to/2MoOX0Q 18-7223
8 1984-1985 amzn.to/2MoOX0Q 18-7223
8 1986-1996 amzn.to/2MoUAfp 18-7219
9.9 1974-1988 amzn.to/2MoOX0Q 18-7223
9.9 1989-1996 amzn.to/2MoUAfp 18-7219
10 1954-1963 amzn.to/2Moiac9 18-7043
14 1968(3*) amzn.to/2MoOX0Q 18-7223
15 1955-1956 amzn.to/2Moiac9 18-7043
15 1974-1988 amzn.to/2MoUAfp 18-7219
15 1989-1996 amzn.to/2MoUAfp 18-7219
18 1957-1968 amzn.to/2Moiac9 18-7043
18 1969-1973 amzn.to/2JzHkaa 18-7222
20 1957-1968 amzn.to/2Moiac9 18-7043
20 1969-1990 amzn.to/2JzHkaa 18-7222
20 1991-1996 amzn.to/2MoUAfp 18-7219
25 1954-1955 amzn.to/2sUi9Vg 18-7024
25 1969-1995 amzn.to/2JzHkaa 18-7222
SAIL DR 1978-UP amzn.to/2JzHkaa 18-7222
28 1962-1964 amzn.to/2t7MkaG 18-7010
30 1956 amzn.to/2sUi9Vg 18-7024
30 1976-UP amzn.to/2sVsTCK 18-7042
33 1965-1970 amzn.to/2t7MkaG 18-7010
35 1957-1959 amzn.to/2sUi9Vg 18-7024
35 1959 amzn.to/2t7MkaG 18-7010
35 1976-1995 amzn.to/2sVsTCK 18-7042
Comments
(1) : Cross Flow
(2) : Commercial
(3) : Early Production
(4) : Also Commercial
(5) : Except 1995-Up 3 Cylinder Models
************************************************************
**** HANDY TOOLS FOR THE JOB ****
Pick Set - amzn.to/2uo9lKd
HOW TO TUNE OR SET YOUR REBUILT CARBURETOR
bit.ly/2faZY66
*Above are Amazon Associate Links
Thanks for taking the time to make these videos. They are priceless. I’ve been working on motors my whole life and I always pick something up free m watching someone else. I haven’t been inside a motor for a few years and I just got a mint FD-11K and I have been monkeying with the carb and forgot all about the damn float being level to the body lmao. Who says ya can’t teach an old dog new old tricks. Lolol. Dammmmmmit man. I’ve had that pig apart five times like I gotta have a piece of trash in a Venturi lol. Nope damn float wasn’t set. Set that sucker and she sat dead flat still at an idle. Had the screws set perfect. Lol. She is just the nicest motor one could find. I bet it doesn’t have ten hours in it. I ripped the whole thing apart and every single screw came right out not a drop of corrosion on any screw like it was built last week. You don’t get em like this one often. I was told there were only 22000 made with the K after the 11 and that that was to signify that it was a 571/2. Something is different in the build than the first half of the year. Any idea what’s different ?? I can’t see anything that stands out from my other. ??!!!! Tia for any help.
Great video. Helps with where to get started. Thanks for taking the time to make this video.
Great video! Thanks for your help.
You're a great tutor. I owe you one for the knowledge you pass on. Now, I can maintain my 10hp Golden Jubilee :-) Thank you!!
He doesn't know what he is doing almost all the info in this video is WRONG! even the initial adjustments are way off if you follow his instruction the motor will not run anywhere near as intended Buy an OMC Evinrude Johnson manual I recommend Seloc 1956-1970 Evinrude Johnson tune up and repair 1.5 to 40 hp
Pretty good video. One thing I would recommend is using those Stanley screw drivers as chisels and such and to invest in a good set of hollow ground screw drivers, you won't be disappointed in the investment.
Brilliant video once again. Same carb as my 1960 model. Also used your link for the carb kit which also ships to the UK. You are a real help my friend. Thanks again.
to bad all the info is wrong brilliant video LMAO!!!
great vid. That's really helped me work out where the bits go on my Johnson carb. Cheers !!
Great job thank you for your knowledge and expertise I will learn a lot from this
Excellent tutorial, thanks maan!
Glad it helped
Lol so wrong
Thanks for the video!
Thank you you for the info!
I just aquired 5 different old boat motors. The first one I am tackling is a '53 Johnson 10HP QD-14. I dont see that model year under 10HP carb kits in your links. Where would I find the right kit for this particular motor?
They are all the same. Sierra 18-7043
Could I use this logic to determine other parts too. Say for ie an impeller kit? I've found the 53 is hard to part together, myself.
Isn’t the bottom jet in the bowl the high speed jet and the upper jet for low speed (what am I missing here?).
Very helpful. Thanks.
I cant find the link for the rebuild kit. I have a 57' 30 hp evenrude big twin 25924, i cant find hardly anything for this old motor and it is very dear to me. Does anyone know what kit I need?
Can I use B12 parts cleaner instead of the acetone you used?
Yes
I've got 59 35hp super seahorse and can't find any carburator kit all together I've seen one piece at a time but I need a complete kit
amzn.to/2MJ4dXf
@@thisoldoutboard thanks a million
hi i have a 1959 gale buccaneers outboard do you have any video on those or how i can use for reference
25 hp
I do not, I hope to make some soon
Do you have a link for a fuel pump kit for a 1971 Johnson 20 horse 20R71s
thisoldoutboard.com/johnson-evinrude-carburetor-rebuild-kits/
Freeze -off ---by CRC is best for rust or acceton with trasmition fluid 10% let sit and do it work avesom lesson you give keep it up
Very helpful video! When you screwed in the long needle(the low idle adjustment) you didn't show the little thing inside there that the needle actually screws into(it doesnt just screw into the body of the carb!) On my 1958 evinrude18hp, it comes out when I pull the needle out! It is just a cylindrical tube with threads inside it that seats in there and the needle screws into. I shove it back in and then screw the brass piece in and then I screw the needle in but, I am completely confused by these three parts and how far to screw it into the piece. mine wont stay running so, I was hoping to see what you did with this piece.
On this parts diagram, which part (number) are you referring to?
www.marineengine.com/parts/johnson-evinrude-parts.php?year=1958&hp=18&model=FD-12&manufacturer=Johnson§ion=Carburetor+Group
Any idea what I am referring to or how to adjust it?
Would be nice to see something for the 9.5 motors as well!
Back40 Adventures I've owned several but I don't have one at the moment. If I get another I definitely will make a video.
Hey I added a couple of videos to my channel where I rebuilt a 9.5 hp carburetor.
How to adjust low and high speed needles?
bit.ly/2faZY66
Is there any differences in dimensions on the high and low speed adjustment pins?
Yes the upper which is low speed comes to a point more like a needle vs the lower which is more of a blunt end once you have both out or in hand and they both have the same threads so don't mix em up
@@daleburnett8431 the reason for asking is, the low speed pin was lost before I bought the engine, and was trying to get a figure on having one machined out
The carb kit referenced comes with more pieces than you need, correct? Looks like a lot of extra washers, seals, gaskets depending on the exact year. Is that correct? I have a 1955 QD-16 10 HP, and just bought this kit from Amazon: www.amazon.com/gp/product/B07F73M7MS/ref=ppx_yo_dt_b_asin_title_o01__o00_s01?ie=UTF8&psc=1. Looks like a lot I don't need given the replacement parts you noted here. Thanks for any feedback you can provide!
Yes the kits can have extra parts. The kits are for a range of years and models. They are cheaper to sell that way, that’s why.
I was wondering if you know what kind of sealer to use for a cork float that can stand up to ethanol gas the shellac I was using don't work
throw it away and get a new plastic float, it will never give any trouble.
I have a QD-23 motor can you tell me what it is
It’s a 1962 Johnson 10 Hp
We have a Johnson FD-18 E Serial no.J 2429434 Sea Horse what carburetor kit will work on it?
18-7043 on eBay ebay.to/2t8a6Uc or Amazon amzn.to/2Moiac9
Is this the same for a 1970 Evinrude 18 hp fastwin?
do you have a video on how to tune the carb
I don't have a video but here is a link with a detailed description of the initial settings.
bit.ly/2faZY66
A full tune up needs to be done on the water while the engine is running.
Hey man where are you from? I need my motor basically completely rebuilt it’s a 1971 Johnson 20 horse this thing is a shit show was wondering if you would be willing to basically rebuild it for me thanks
That was almost painful!
Top needle is low speed not high.
Uhh, you did not install the high or low speed packing washers correctly. Please follow the repair manual and illustrated parts breakdown.
does anybody know what the carb settings are for an Evinrude model 4266
how do you start 1940 1.1 hp evinrude
Muffler you mean in take
Silencer was the term I should have used
See Part Here --->
www.marineengine.com/parts/johnson-evinrude-parts.php?year=1959&hp=10&model=QD-20&manufacturer=Johnson§ion=Carburetor+Group
forgot all the packing washers around the needle. Thats gonna leak like a strainer.
This is not useful.
You don't know what you're doing That is not how you adjust the float and you didn't even use the packing washers. The jet needles are going to need adjusted all the time and your initial jet needle adjustments are wrong also The low speed should be backed out 1 1/2 turns then adjusted while at the slowest idle you can get and keep running the high speed initial adjustment is 3/4 turn out read the manual before you do a video it's not just take a guess at it and make a video
Thanks for the feedback
The identification of the high and low speed jets was mixed up